Microphone

Discreet neutral-coloured neckband headset microphone, for use with VHF and UHF beltpack transmitters. Ideal for performers and fitness instructors. Threaded 3.5mm mono jack connector Suitable for Chord, Citronic and QTX beltpack transmitters Power supply 3Vdc (phantom from beltpack) Transducer type Cardioid condenser capsule Connector 3.5mm mono jack - threaded Dimensions 140 x 180 x 60mm Weight 12g

JZ Microphones DMK1, small diaphragm Condenser Microphone Set for drum overheads and the kick drum, contains 3x JZ BT201 small diaphragm Condenser Microphone (1x matched Pair BT201 + 1x -BT201 with -20dB), Transducer type: electrostatic, Operating principal: pressure gradient, Diaphragms active diameter: 13 mm, Frequency range: 20 Hz to 20 kHz, Polar pattern: cardioid, Output impedance: 50 ohms, Rated load impedance: 1000 ohms, Suggested load impedance: >250 ohms, Sensitivity at 1000 Hz into 1000 ohms load: 11 mV/Pa, S/N Ratio CCIR 468-3 weighted: 71 dB, S/N Ratio DIN/IEC 651 A-weighted: 82 db-A, Equivalent noise level DIN/IEC A-weighted: 12 dB-A, Maximum SPL for 0.5% THD at 1000 ohm load: 140 dB, Dynamic range of the microphone preamplifier: 128 db, Phantom powering voltage on pins 2 & 3... Less

JZ Microphones BH1S, Condenser Microphone, Transducer type: electrostatic, Operating principal: pressure gradient, Diaphragms active diameter: 2 x 27 mm, Frequency range: 20 Hz to 20 kHz, Polar pattern: Omni / Cardioid / Figure - 8, Pad switch: -20db/-10db, Output impedance: 50 ohms, Rated load impedance: >250 ohms, Suggested load impedance: 1000 ohms, Sensitivity at 1000 Hz into 1000 ohms load: 18 mV/Pa, S/N Ratio CCIR 468-3 weighted: 75,5 dB, S/N Ratio DIN/IEC 651 A-weighted: 86,5 db-A, Equivalent noise level DIN/IEC A-weighted: 7,5 dB-A, Maximum SPL for 0.5% THD at 1000 ohm load: 134,5 dB, Dynamic range of the microphone preamplifier: 127 db, Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V, Current consumption: 1,5 mA, Output connector: 3-pin XLR male, gold plated... Less

JZ Microphones BT-201/3S Matched Pair - 2 small diaphragm Condenser Microphone, Transducer type: electrostatic, Operating principal: pressure gradient, Diaphragms active diameter: 13 mm, Frequency range: 20 Hz to 20 kHz, Polar pattern: Omni, Cardioid, Cardioid -20dB, Output impedance: 50 ohms, Rated load impedance: 1000 ohms, Suggested load impedance: >250 ohms, Sensitivity at 1000 Hz into 1000 ohms load: 11 mV/Pa, S/N Ratio CCIR 468-3 weighted: 71 dB, S/N Ratio DIN/IEC 651 A-weighted: 82 db-A, Equivalent noise level DIN/IEC A-weighted: 12 dB-A, Maximum SPL for 0.5% THD at 1000 Ohms load: 140 dB, Dynamic range of the microphone preamplifier: 128 db, Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V), Current consumption: Less

An aluminium body condenser microphone with 'back electret' transducer system ensuring a smooth frequency response. Powered by a 1.5V battery making it suitable to be used over long distances without the need for a phantom power supply whilst the cardioid pattern eliminates feed back. Supplied with connecting lead and windshield Cardioid, electret condenser Low-cut switch Battery 1.5Vdc (1 x AA) Connector 6.3mm mono jack Frequency response 100Hz - 16kHz Impedance 600 ohms Lead length 5.0m Microphone : Connector XLR Sensitivity -68dB Dimensions 185 x 26mmØ Weight 575g

Applied Microphone Technology AMT S3G Studio, Condenser microphone with omni polar pattern, ideal for acoustic Guitars, special clip system that fits in the sound hole of the guitar, includes AP 40 pre amp, microphone S3G and case Microphones / Condenser Microphones

A stylish handheld microphone with USB 2.0 connection allowing you to simply plug and play with Audacity software or similar. Wide frequency response On/Off slide switch Suitable for Windows 98, 98SE, ME, XP, 7 and Mac OS 9, X Power supply USB powered Directivity Super cardioid Frequency response 50Hz - 16kHz Impedance 600 ohms ±30 Max. SPL 140dB (1kHz @ 1%THD) Sensitivity -72dB±3dB @ 1kHz (0dB=1V/µ bar) Type Dynamic Dimensions 179 x 49mmØ Weight 288g

Applied Microphone Technology AMT LS-Studio, with AP 40 Pre amp, Ideal for woodwind instruments, designed to be used with the AMT body pack or Shure or Sennheiser Beltpack systems,Phantom or 9v battery required, includes LS microphone, AP 40 Pre amp, case and detatchable cable Microphones / Condenser Microphones

Applied Microphone Technology AMT WS-Shure, Double microphone system for use with clarinet,Flute or oboe, Specially designed mini light weight clamp, direct connection to the AMT belt pack or Shure,Sabine or Clockaudio systems, includes WS microphone, detatchable cable and case Microphones / Condenser Microphones