vintage microphone

JZ Microphones Vintage 11, Condenser Microphone, Transducer type: electrostatic, Operating principal: pressure gradient, Diaphragms active diameter: 27 mm, Frequency range: 20 Hz to 20 kHz, Polar pattern: cardioid, Output impedance: 50 ohms, Rated load impedance: 1000 ohms, Suggested load impedance: > 500 ohms, Sensitivity at 1000 Hz into 1000 ohms load: 22 mV/Pa, S/N Ratio CCIR 468-3 weighted: 76,5 dB, S/N Ratio DIN/IEC 651 A-weighted: 87,5 db-A, Equivalent noise level DIN/IEC A-weighted: 6,5 dB-A, Maximum SPL for 0.5% THD at 1000 Ohms load: 134 dB, Dynamic range of the microphone preamplifier: 128 db, 48V Phantom power required, Output connector: 3-pin XLR male, gold plated contacts Microphones / Condenser Microphones

JZ Microphones Vintage 12, Condenser Microphone, Transducer type: electrostatic, Operating principal: pressure gradient, Diaphragms active diameter: 25 mm, Frequency range: 20 Hz to 20 kHz, Polar pattern: cardioid, Output impedance: 50 ohms, Rated load impedance: 1000 ohms, Suggested load impedance: > 500 ohms, Sensitivity at 1000 Hz into 1000 ohms load: 22 mV/Pa, S/N Ratio CCIR 468-3 weighted: 76 dB, S/N Ratio DIN/IEC 651 A-weighted: 87 db-A, Equivalent noise level DIN/IEC A-weighted: 6 dB-A, Maximum SPL for 0.5% THD at 1000 ohm load: 134 dB, Dynamic range of the microphone preamplifier: 128 db, 48V Phantom power required, Output connector: 3-pin XLR male, gold plated contacts Microphones / Condenser Microphones

JZ Microphones Vintage 67, Condenser Microphone, Transducer type: electrostatic, Operating principal: pressure gradient, Diaphragms active diameter: 25 mm, Frequency range: 20 Hz to 20 kHz, Polar pattern: cardioid, Output impedance: 50 ohms, Rated load impedance: 1000 ohms, Suggested load impedance: > 500 ohms, Sensitivity at 1000 Hz into 1000 ohms load: 22 mV/Pa, S/N Ratio CCIR 468-3 weighted: 76 dB, S/N Ratio DIN/IEC 651 A-weighted: 87 db-A, Equivalent noise level DIN/IEC A-weighted: 6 dB-A, Maximum SPL for 0.5% THD at 1000 ohm load: 134 dB, Dynamic range of the microphone preamplifier: 128 db, Phantom powering voltage on pins 2 & 3 of XLR: +48 V (+/-4 V), Current consumption: 2 mA, Output connector: 3-pin XLR male, gold plated contacts, Signal polarity: positive toward pressure on a... Less

Violet Design The Amethyst Vintage, Transducer type electrostatic, Operating principle pressure gradient, The diaphragms active diameter 25 mm (1), Frequency range 20 Hz to 20 kHz, Polar pattern unidirectional, cardioid, Output impedance 50 ohms, Rated load impedance 1000 ohms, Suggested load impedance > 500 ohms, Sensitivity at 1000 Hz into 1000 ohms load 21 mV/Pa, S/N Ratio CCIR 468-3 weighted 76 dB, S/N Ratio DIN/IEC 651 A-weighted 87 db-A, Equivalent noise level DIN/IEC A-weighted 7 dB-A, Maximum SPL for 0.5% THD at 1000 Ohms load 134 dB, Dynamic range of the microphone preamplifier 127 db, Current consumption < 2 mA, incl. Shockmount, Dimensions: 168 x 63 x 41 mm, weight 350 grams Microphones / Condenser Microphones

Awesome quality microphone cables Hard wearing gold plated neutrik connectors Sommers club series mkii vintage cable For use with all balanced xlr connections Free velcro cable tie

Size Guide (Women): Small (Bust: 32 inch/81 cm, Length: 26 inch/66 cm) / Medium (Bust: 34 inch/86.5 cm, Length: 26.5 inch/67 cm) Style : Printed Material : 100% Cotton Single Side Silk Screen Printed SIZE : Small

Square microphone pencil shower head and 1.5m hose and elevator rail

Quality Set of Cufflinks - Brand New & in Presentation Box as standard Retro Studio Microphone Cufflinks This fantastic pair of Cufflinks are the perfect accessory and finishing touch to any cuff! These fabulous cufflinks would make a great gift too!

Awesome quality microphone cables Hard wearing gold plated neutrik connectors Sommers club series mkii vintage cable For use with all balanced xlr connections Free velcro cable tie

Violet Design The Global Pre, compact hi-end quality electrostatic microphone preamplifier body for Violet Design Capsule Heads, Phantom powered, linear, class-A discrete solid state transformerless preamplifier electronics provides extremely ultra-low self noise and hard to measure all kind of distortion, fully compatible with Germany made vintage M-series interchangeable capsule heads, and B-series & VIN-series interchangeable capsule heads, included GSM adjustable angle compact studio shock mount, Transducer type: electrostatic, Frequency range: 5 - 50000 Hz, Directional of polar pattern: depends of capsule, Output impedance: 50 ohms, Rated load impedance: 1000 ohms, Suggested load impedance: >250 ohms, Dynamic range of the internal preamplifier: 130 dB, Phantom powering voltage on... Less

Round microphone pencil shower head and 1.5m hose and elevator rail

Crane Song Flamingo, Stereo/ Dual Mono Class-A Microphone Pre-Amp, can be operated as a musically transparent amplifier, and is capable of emulating vintage sounds as well as creating distinctive new ones, transformerless balanced XLR inputs and outputs, 48V Phantom Power, Phase Switch, 22 Element VU Metering, Selectable Tonal Coloration, 100V/115V/230V/24 0V Mains, Dimensions: 19 1U - 31,75 cm deep, weight: 8,6 kg Sound Processors, Effects / Preamps

Awesome quality microphone cables Hard wearing gold plated neutrik connectors Sommers club series mkii vintage cable For use with all balanced xlr connections Free velcro cable tie

Capture all your recordings simply with this ice cool Blue Snowball USB HD Microphone for exciting sound. Futuristic capturing Record your sound with breathtaking quality as the Blue Snowball Microphone offers HD sound that will pick up even the smallest of background noises. With a vast frequency range, you will be able to capture a range of notes from low down bass to high screeching singing. Portable recording Connect your Blue Snowball Microphone via USB to laptop or computer for instant connectivity wherever you are in the house for instant recording. At just 2kg with the tripod stand included, you could always take your Blue Snowball USB HD Microphone to the streets or to school as you and your friends get involved with exciting results! Upload and share Save your files on your... Less

NOVELTY RETRO VINTAGE MICROPHONE CUFFLINKS THESE CUFFLINKS ARE BRAND NEW AND AND COME IN A VELVET PRESENTATION POUCH YOU WONT FIND BETTER QUALITY THAN THIS

Blue 'The Ringer' - vintage-style suspension mount designed to isolate the microphone body from low-frequency energy when mounted on a mic stand. Ideal for the Ball, 8-Ball, Snowball and Kickball. The Ringer can also accommodate virtually any other microphone with a standard thread mount. Microphones / Microphone Accessories

Awesome quality microphone cables Hard wearing gold plated neutrik connectors Sommers club series mkii vintage cable For use with all balanced xlr connections Free velcro cable tie

Awesome quality microphone cables Hard wearing neutrik connectors Sommers club series mkii vintage cable For use with all balanced xlr connections Free velcro cable tie

Awesome quality microphone cables Hard wearing gold plated neutrik connectors Sommers club series mkii vintage cable For use with all balanced xlr connections Free velcro cable tie

The new 3m Tiger Microphone to USB Cable ie USB to XLR female Cable is ideal for musicians who record through their PC or Mac using recording software and require an affordable yet high quality cable that delivers clear and reliable sound results through plugging straight into a USB port. Perfect for dynamic vocal microphones that dont require phantom power, the Tiger USB-XLR Cable is a plentiful 3 metres in length and constructed from a highly durable 6mm thick low-noise cable with a black plastic sheath. This cable delivers performance and feels how a professional cable should - Strong, durable and reliable. XLR to USB Lead Specification: 3 Metres Low Noise Highly Durable Microphone to USB Cable

Violet Design VIN47, Condensermic Capsulhead, vintage standard mount changeable capsule head for Violet Design - The Global Pre. You can also use VIN-heads with CVM563, RFT CM7151 and other bottle type microphones, Polar Pattern: Cardioid, warm, sweet, vintage, similar sound to U47, Dualmembran - Diaphragm: 26mm, Transducer capsule is internally damped from vibrations and resonances, Comes inside wooden box Microphones / Condenser Microphones

Professional vintage microphone for studio recording!Since its first heyday in the 50s/60s, there has been relatively quiet about the good old ribbon microphones. Originallly they were preferred on the basis of eight characteristics as moderating microphone for radio and TV as both moderator and the guests were able to speak from both sides in a single microphone. Meanwhile, these classics are experiencing a real renaissance in technically modern twist. Ribbon microphones are now full again announced after the tubes and vintage hype in recent years and belong to professional engineers for quite some time again for everyday cutlery.This trend is not to be missed by Pronomic, of course, and introduces the RM-1 on the market, the competition can look mighty old in terms of price/performance... Less

This robust, adjustable microphone boom stand is one of our best selling products here at DJM and offers absolutely superb quality at a great price. Featuring a sturdy tripod base and boom arm with telescopic adjustment, this hugely popular stand favoured by bands, solo artists, schools, colleges and teachers is ideal accomodation for most instrument and vocal microphones. A superb choice at an unbeatable price. Features and Benefits: High-grade structure Adjustable height and angle Sturdy joint mechanisms Rubber grips for eXtra stability Thread: 5/8 Specifications: Weight: 2.16kg MaX Height: 162cm Min Height: 96cm Overall Boom Length: 64cm Collapsed Dimensions: 86 X 8 X 8cm

This robust, adjustable boom microphone stand is one of our best selling products here at DJM and offers absolutely superb quality at a great price! Unlike mic stands by similar brands, our boom microphone stand weighs over 2kg, ensuring eXceptional strength and durability for a whole host of uses including live stage events, school productions and studio recording. Featuring a sturdy tripod steel base for enhanced balance and weight distribution and a boom arm with solid telescopic adjustment that adjusts up to an incredible 64cm in length, this hugely popular stand favoured by bands, solo artists, schools, colleges & teachers is the ideal choice for use with most common vocal and instrument microphones. Additional features include sturdy and smooth joint mechanisms, rubber feet for grip... Less

Thon Microphone Stand Case - for 16x mic stands and microphones. 7mm birch ply with 30 x 30mm aluminium profiles, 1cm foam padding, inlay for 16x microphones, 6x butterfly latches, 4x recessed handles, 2x rear hinges, medium corners, 4x 100 wheels (2x with brakes & 2x without). External dimensions: 58.5 x 58.5 x 150.8cm (W x D x H). Weight: 47kg. Made in Germany. Cases, Racks / Equipment Cases

Focusrite ISA One microphone preamp (includes flightcase) with ADC card fitted.Classic Single-channel Microphone Pre-amplifier with Independent D.I.OverviewThe 'ISA One' microphone pre-amplifier delivers Focusrite's prestigious ISA transformer- based pre-amp in a rugged and portable chassis, at a groundbreaking price.ISA One features the classic vintage microphone pre-amplifier topology from the original ISA110 module, including the Lundahl L1538 transformer and bespoke zobel network. (The original 110 pre amp formed the cornerstone of each channel of Focusrite's legendary Forte console.)The pre-amp is complemented by a line input (XLR and TRS Jack) and an independent D.I. channel, complete with dedicated gain control, active or passive impedance switch, a TRS Jack output for routing to... Less

Violet Design VIN21, Condensermic Capsulhead, vintage standard mount changeable capsule head for Violet Design - The Global Pre. You can also use VIN-heads with CVM563, RFT CM7151 and other bottle type microphones, Polar Pattern: Cardioid, sound: medium bright, Single-Membran - Diaphragm: 21mm, Transducer capsule is internally damped from vibrations and resonances, Comes inside wooden box Microphones / Condenser Microphones