Selling Point Note1: Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.If you can not make sure which item fit for your car,please send the VIN CODE to us confirm it before order. Note2: No sensor programming Required :The Tire Preure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".Simplified Relearn : OBDII requiredInstallation of TPMS is recommended to be performed only by trained profeionals. Application For CHRYSLER 200 2011-2014For CHRYSLER 300 2005-2007For CHRYSLER CROSSFIRE 2006-2008For CHRYSLER PACIFICA 2006-2008For CHRYSLER PT CRUISER 2008-2010For CHRYSLER SEBRING 2007-2010For CHRYSLER TOWN & COUNTRY 2006-2007For DODGE AVENGER 2008-2014For DODGE CALIBER 2007-2012For DODGE CARAVAN 2006-2007For DODGE CHARGER 2006-2007For DODGE GRAND CARAVAN 2006-2007For DODGE MAGNUM 2005-2007For HYUNDAI ELANTRA 2009-2012For JEEP COMPASS 2007-2013For JEEP GRAND CHEROKEE 2005-2007For JEEP LIBERTY 2005-2006For JEEP PATRIOT 2007-2013For MITSUBISHI LANCER 2008-2010For MITSUBISHI OUTLANDER 2006-2009For MITSUBISHI RVR 2011-2015For RAM DAKOTA 2011 SPECIFICATION :Replace For Part Number:5139640AA, 56029526AA, 56053030AA, 56053030ABBattery Life: ABOUT 3 YEARSOperating Frequency: 315MHzPACKAGE CONTENT :NORMAL PACKET COMPREHENSIVE VEHICLE COVERAGEInstallation Proce1. Loosen the tire: Remove the valve cap and core and deflate the tire.2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Aemble the sensor body against the rim and tighten the screw.5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
Fruugo United Kingdom