Tiling wall spaces this season? To prevent winding up with corners or edges that seem bare or unfinished, use this bright silver aluminium tile trim. Silver in colour, it has a fully rounded quadrant face, for a nice smooth finish, and it belongs to our range of Aluminium Quadrant Trims. It ideally caters for tiles that are 10mm thick. To plug the gaps in the ends, use our Bright Silver Corner Pieces. Maintenance Genesis EAQ does not require any special maintenance. Oxidation films on Aluminium may be removed with a common polishing agent; however, they do reoccur. Damaged anodised finishes may only be repaired by recoating. Installation 1. Select a Tile Trim according to tile thickness 2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering. 3. Press the perimeter of the tiled covering. 4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage. 5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile, the profile should not be higher than the tiled surface, but rather up to approx. 1mm lower. 6. Fill the joint completely with grout.Genesis Aluminium Quadrant Trim 10mm Bright Silver 2.5m (pack of 5)
Tile Kingdom - Indoor and outdoor tiles