SIDE WINDOW STICKERS Set of two internal side window stickers 36 x 6 cm each Stickers are cut so that they can be applied from the inside of the car resistant to all weather conditions have a transfer film can be glued dry and wet plotter cut from colored foil ORACAL sticker is only what is shown in the picture in white protected against damage in transport Patterns (visible from the outside when applied to the glass) colors All colors are shimmering. Stickers are cut from branded foils of the German company ORACAL. These are not prints on colorless films or other whose resistance to UV radiation and cleaning chemicals is questionable. The colors of our stickers are crisp and durable. As a standard, we make stickers in gloss. Our plotter stickers do not have an unnecessary background. Sticker pattern, the inscription is transferred using a transfer film which after application should be removed. The sticker is only what you see in the drawing in a color other than white (usually patterns are presented in black). What is inside the sticker shown in the drawing in white after application will be in the color of the glued surface. Example below, left sticker before sticking right after sticking Brief instructions for applying small stickers: 1. Clean the surface, degrease it 2. Press the transfer film well 3. Peel off the transfer film with the paper sticker 4. Stick a transfer foil sticker 5. Remove transfer film 6. Ready When applying larger stickers, it is good to spray them (from the adhesive side) with a special liquid or water. This makes it easier to place the sticker and remove any air bubbles. The transfer film is removed in this case after removing/evaporating the liquid. Your opinions: Good quality glass stickers. I would recommend this seller.
Fruugo United Kingdom