First, thoroughly clean the surface to be impregnated with CleanPrince wood degreyer and allow it to dry. Then spray CleanPrince wood impregnation evenly and allow to dry again. Alternatively, the product can also be applied with a roller or brush. The surface treated in this way is water-repellent and protected against swelling and shrinkage. Deposits and green deposits therefore no longer find a breeding ground. No material should dry on the surface, otherwise undesirable shine may form. For highly absorbent surfaces, apply the second coat after approximately 5-10 minutes. The drying time is about 2 hours, after 24-48 hours the product develops its full effect. The processing temperature should be between 5°C and 25°C. SAFETY INSTRUCTIONS: P264 Wash skin thoroughly after handling. P280 W.
eBay