HARRISON 72 T GEAR USED, FOR L5,L6,&140 SERIES OF LATHES, THIS GEAR HAS A 1 1/16

THAT HAS TO BE SLEEVED FOR L5 LATHES, SEE PHOTO OF SLEEVE, GOES FROM 1 1/16" DOWN TO 7/8". THE GEAR IS 14DP, THE BORE NEEDS TO BE 0.875" FOR L5 LATHES, KEY WIDTH IS 0.250". I HAVE CHECKED ALL OVER THE GEAR, THERE IS 1 TOOTH MISSING BUT IT STILL WORKS OK.

eBay