as a load distribution layer of at least 10 mm layer thickness on old wooden floorboards (the respective static conditions are unconditional First fill the anchor holes up to below the top edge of the anchor hole, then pour the machine plate. The minimum layer thickness is 10 mm. Layer thicknesses over 200 mm must be applied in multiple layers. The subsequent layer can be applied after the previous layer has hardened and cooled After approx. 150 to max. After waiting 180 minutes, smooth out strips with a surface spatula, if necessary. superficial air bubbles After approx. 150 to max. After waiting 180 minutes, smooth out strips with a surface spatula, if necessary. superficial air bubbles In order to achieve a slip-resistant surface, ASODUR-EV200 can be used after approx. 120 min.
eBay