Adafruit MCP9600 I2C Thermocouple Amplifier for Type K, J, T, N, S, E, B, R With the Adafruit MCP9600 Breakout Board, you can use almost any thermal element with your microcontroller. Thermocouples of type K, J, T, N, S, E, B and R are supported. The MCP9600 not only takes care of all analog acquisition of the sensor element and the provision of the measured values via I2C bus, but also allows various alarms to be set if the temperature measured on the thermocouple or the chip is exceeded or not reached. The breakout board has level converters and can be operated at 3.3 V and 5 V. Type B: + 1000 ° C to + 1800 ° C Resolution of ± 0.0625 ° C - please note that type K thermocouples have a precision of approximately ± 2 ° C to ± 6 ° C. Internal temperature measurement Operating voltage: 3.3.
eBay