Cathodic protection of bare and galvanised steel 90% pure zinc Resists 500 hours of salt spray testing (DIN 50021 SS) To recoat within one hour, brush version after 4 hours DRY TIMES BY 20º C/RV 50% Touch dry: 10 minutes Dry to handle: 30 minutes Dry to recoat: Within 1 hour or after 48 hours Fully cured: 7 days PRACTICAL CONSUMPTION Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. SURFACE PREPARATION Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means. The surface must be clean and dry during application.
eBay