1. Apply the M110 polishing liquid to the stamp and work on areas of about 50 x 50 cm at a time. Cross the passages for optimal surface cover. Work with moderate pressure on the surface until the defects or tracking traces are eliminated. Reduce the pressure when the liquid starts to dry. 1. Apply the M110 polishing liquid on the disc and work on areas of about 50 x 50 cm at a time. Cross the passages for optimal surface cover. Apply with moderate pressure during the first 2-3 passages then with a light pressure during the following 2 assists. Tips: For a default result, regularly clean the disc. It is recommended to use several polishing discs and alternate them during the renovation stage. Favor a moderate pressure during the first passages then a light pressure during the final passage.
eBay