Fine tune the angle of your UCA and convert it to Uniball performance with our JPRF6292. An upgrade to your K6292 UCA ball joints, our Uniball upgrade will smooth out and upgrade the handling of your front end. It is best to measure angles of UCA at OEM height using your OEM ball joints before any installation of our Uniball joint. Those angles will be your target angles as you change the height of the Uniball bearing. That is why we strongly recommend to make height changes in small increments (typically 5mm at a time), then immediately perform a front end wheel alignment. From that point, you can adjust the height of the Uniball and the angle of your UCA 5mm at a time. You only go higher if you have LCA drop cradle, and in this case, you will need to inform us how much did you lower your.
eBay