New handlebar lock with brass housing and 2 key retaining plate with rivet 10mm steel bolt, spring fits for Kreidler Gilera EC1 Tomos A35 and other mopeds and mopeds with these dimensions The total length is approx. 44mm, case diameter (brass part) is approx. 12.5mm and approx. 26mm long, the steel bolt has a diameter of 10mm and is approx. 18mm long, the guide pin is approx. 15mm long and approx. 3.5mm wide. From the brass housing to the guide pin I measure approx. 10mm The removal of the old steering wheel lock without a key only works if you drill out the entire lock cylinder with a 10mm steel drill up to the steel bolt. (drilling is relatively easy through the soft brass material) Please after the end of the auction necessarily Specify the Ebay article number as the purpose for bank.
eBay