A fast fit fixing kit for bar valve showers aimed at easing the installation of bar shower valves. Removes the need for in wall support battens. Reduced chance of in wall leakage as all joints are outside of the wall. Suitable for all UK manufactured bar valves. Fitting Instructions: First check the thermostatic mixer valve (TMV) you are fitting has inlets at approximately 150mm centres and it has 3/4\ thread fittings (Most showers do). 1. Fit inlet pipes in 15mm copper tube so the outlets are at 150mm centres using the template which is provided and the tube protrudes at 30mm +/1 2mm from the finished surface tile. The inlet pipes should be fitted to allow about 2mm adjustment in each direction with a hole through the tiles of approximately 20mm diameter. 2. Fit the wall plate .
eBay