SEAL IT OCRS ACCELERATOR Additive To Cure Seal It Liquid Membrane At Temperatures Below 5°C. Description: An accelerating additive that allows Seal It Liquid Membrane to be applied and cure at temperatures below 5°C Preparation Prepare surfaces properly in line with the instructions for SEAL IT ONE COAT LIQUID MEMBRANE. Bitumen coatings must first be primed with SEAL IT PRIMER. A separate mixing bucket may be required for combining the ACCELERATOR and LIQUID MEMBRANE to prevent overspill. Alternatively, a small amount of the LIQUID MEMBRANE can be removed from the tin before adding the ACCELERATOR. Mixing Mixing ratio is approximately 1L of ACCELERATOR to 20L of LIQUID MEMBRANE. For 5L of LIQUID MEMBRANE add 250ml of ACCELERATOR. Shake and mix thoroughly before use. Mix the.
eBay