Pot life is approximately 15-25 minutes at 77 degrees Fahrenheit. Complete cure is approximately 45 minutes to 4 hours. Do not use under 60 degrees Fahrenheit. Clean surface and wipe clean with a dry rag. Apply with a Roller or Brush or cup gun application. Apply approximately 20 mils, approximately the thickness of a dime, of gel coat. Covers approximately 20 sq. ft. per quart, or 80 sq. ft. per gallon. May add up to 4 % pigment, normally 1oz. per quart, or 4oz. per gallon by volume. May be thinned with Styrene, adding no more than 10% by volume. Clean up with Acetone To use gel with no wax as the topcoat, thin slightly (10%) with acetone and when the gel starts to tack up, spray a coat of PVA over the repair. the pva will seal the gel and allow it to dry tack free and washes off with wa.
eBay