Anelva 5kV 20mA ion pump controller high voltage power supply, tested working.100/120v mains input @ 3A max, easily obtained from a transformer.Pic 1 is on turn-on, pic 2 is when "HV on" is pressed and the readout is set to "voltage", right hand button.Pic 3 displays current when unconnected; pic 4 is displaying 24 uA when I connected a 210M ohm testmeter probe. My testmeter indicated 4.9kV, about right. I looked inside to see if it could be switched to 240V working, I don't think it can be.There is a 16-pin remote connection at the back, and a remote/local button on the front, just used local here.The power button has broken off, but still works if you push it right in.
eBay