This is a pivoting wall mount for the Sonos One Smarthome Speaker. It is easy to assemble and allows you to mount your speaker out of the way, while remaining easy to access, and angle to your desire. To assemble, place the provided nut into the hexagonal hole in the bracket, make sure the bottom of the nut faces into the hole. Align the hole in the middle of the speaker plate above the hole we just placed the nut into. Take the provided bolt and place it through the speaker plate and drive it through the nut in the bracket. Tighten it all the way then loosen/adjust it to allow the plate to pivot freely, or with as much resistance as you prefer. Take the two provided drywall screws and screw them through the two available holes in the bracket and anchor into the wall. Don\'t miss any offe.
eBay