Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. LCD display + touch screen digitizer assembly replacement part 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Fruugo United Kingdom
[Quality Assurance]for 100% official 3 V3 SE Extrusion Kit. The shell of Ender3 V3 SE extrusion is made of high-quality plastic, and the extruded gears inside are made of metal material. Compatible with for S1/ S1 Pro/-5 S1//Sermoon V1/ V3 SE/ V3 KE 3D Printer. [Dual Gear For Stable Printing]The 3V3 SE direct extruder with dual gear drive does not damage the filament, supports stable, smooth and precise filament feeding. [Large Torque Smooth Feeding]The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal. [Easy to Operate]Labor-saving wrench design makes it more convenient and faster to insert filament. With adjustable tensioner, allows you to fine-tune the pressure exerted by gears onto the filament to print more exquisite models. Colour: Black Material: plastic+metal Package Contents: 1 x Dual Gear Extruder Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Third Brake Light Feature: Superior Performance :Made of high quality ABS housing , this red brake light is waterproof, sturdy, of superior uv protection and a high impact resistance.Waterproof :This upgraded brake light has waterproof EVA built, effectively prevent damage from any sand, dirt, dust, water, snow or shock.Compatibility Reference:Fit for 5 Series E60 E61 Facelift 2007-2010. This rear brake light with LED chips is much more brighter than , to remind the rear cars of stopping signal timely and driving .Perfect Replacement:These accessories meet the standard, retaining car groove, and perfectly fit as the brake light of your car. Part number: 63256925902, 63257145667. Perfectly replace the broken and aging factory brake lamp.Easy To Install:Plug and play design makes installation of this brake light easy and simple. Feature: Superior Performance :Made of high quality ABS housing , this red brake light is waterproof, sturdy, of superior uv protection and a high impact resistance. Waterproof :This upgraded brake light has waterproof EVA built, effectively prevent damage from any sand, dirt, dust, water, snow or shock. Compatibility Reference:Fit for 5 Series E60 E61 Facelift 2007-2010. This rear brake light with LED chips is much more brighter than , to remind the rear cars of stopping signal timely and driving . Perfect Replacement:These accessories meet the standard, retaining car groove, and perfectly fit as the brake light of your car. Part number: 63256925902, 63257145667. Perfectly replace the broken and aging factory brake lamp. Easy To Install:Plug and play design makes installation of this brake light easy and simple. Specification: Part Number: 63256925902, 63257145667 Light Color: Red Lens Color: White Lens Material: ABS Placement On Vehicle: Rear Voltage: 12 V : LED Fitment: Fit For 5 Series E60 E61 Facelift 2007-2010 Color: White Package Contents: 1 x Brake Light Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
[Compatible with]: Our pool filters are compatible with the following hayward robotic pool cleaners: TigerShark, Tiger Shark QC, TigerShark Plus, Tiger Shark 2, Tiger Shark 2 Plus Series, Shark Vac, SharkVac XL, Aqua Vac 500 Serie. Pool cleaner filters Part Number: RCX70101PAK2, RCX70101. Pool shark filter cartridge fit for model Tiger Shark rc9990gr, TigerShark rc36000qc, Tiger Shark rc9950, TigerShark rc9952, Tiger Shark rc9742, TigerShark rc4702, Tiger Shark w3rc9740cub, Shark vac rc9740. [Quality Materials]: Our RCX70101 robotic pool cleaner is made of a hard-wearing ABS. Meanwhile the filter plate of the cartridge is woven with a diamond-shaped grid and thickened PET fiber material, which has a dense mesh that gives the robotic pool filter an ultra-fine and more pleated shape to effectively filters dirt and debris from the water. Maximum filtration efficiency is achieved, allowing the vacuuming robot to perform at its best. [Reusable]: Our RCX70101 robotic pool cleaner filter cartridge is made of reinforced PET fiber material woven into a diamond-shaped grid, it is more effective in improving filtration performance and impact resistance. As a result, our pool cleaner filters can withstand rough and frequent use, as well as large amounts of dirt and debris collection. [Easy to Clean]: To clean the cartridge after each use, place the pool cleaning robot on its side. Loosen the bottom cover latch and remove the bottom cover assembly. Pull out the cartridge. Your cartridge is a three-piece filter assembly and you can take the elements (part number RCX70101) out to clean it thoroughly. A quality ultra-fine filter will last 2-3 years. Please flush the filter every 4-6 weeks for best performance. [3 Layer Swimming Pool and Spa Filter]: We have designed a 3 layer thick pool and spa vacuum filter, which can absorb as much debris, and dirt as possible from your swimming pool. Material: ABS Colour: Black + white Package Contents: 8 x Pool Filter / 6 x Pool Filter
Fruugo United Kingdom
Features:100% brand new and high quality Made of high-quality materials, more durable Side brush allows your vacuum cleaner to reach deeper into the carpet for a more thorough cleaning Filter filters fine dust to reduce dust, pollen and other allergens from penetrating into the air you breathe. Uniquely designed brushes with rubber treads to adapt to different floor surfaces that remove everything from small dust to large deposits. As part of normal maintenance, it can be easily removed and replaced It is best to replace spare parts every 2 to 3 months to keep the machine running at its best performance Colour:As Shown Material:Plastic Package Contents: 2 * pair of roller brush 8 * side brush 8 * hepa filter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Name: Carburetor Model: D27666 Compatible Model: for Wacker BS50-2 BS50-2i BS60-2 BS60-2i&for Walbro HDA 242 HDA 252 colour: silver Material: metal Package Contents: 1 x Carburetor Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
One Key To Control and Ultra-Fast Feedback Destroyer High-performance 3-channel Input Feedback Destroyer Ultra-narrow filters for extremely effective feedback suppression, while keeping highest sonic quality Power Supply:Input AC 110V-240V, 50Hz-60Hz 0.5A Output DC 5V, 1A-2A Dimensions: 125 x 90 x 25 mm Audio Inputs and Outputs Connectors: 1/4 inch / 6.35mm Impedance: 30k Max Output Level: +16 dBu at +4 dBu Nominal Level, +2 dBV at -10 dBV Nominal Level Bandwidth: 20Hz to 20kHz, 0.3dB Noise: Greater than 94 dB, Unweighted (20Hz to 20kHz) THD: 0.0075 Percent Typ. @ +4 dBu, 1kHz, Gain 1 Colour:black Material:ABS Package Contents: 1 * Wireless Microphone Feedback Suppressor Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
High quality replacement of standard incandescent light bulbsShatter resistant, flame retardant glass lens180 degree beam angle for more efficient lightingWide Application: Commercial and exhibition locations,Hotel, conference room,Factory, office, house,Airport, metro, station,School, hospital and other public places,Places that require energy-efficient and high color rendering indexConnector: E14Type: LED BulbsWattage: 3WVoltage: AC220VDimmable: NoLumens: 150LmBeam Angle: 360 Degreecolour: redMaterial: ABSPackage Contents:10 x LED BulbOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom