UltraTile ProFlex SP is a single part, rapid setting, flexible adhesive for wall and floor tiles. It is specially formulated with enhanced adhesion and flexibility, making it ideal for areas where slight movement or vibration can occur. Classified as S1 in accordance with EN 12004 it has the high level of deformation for greater tolerance to movement. Ideal for use with porcelain, mosaic, natural stone and glass tiles S1 flexibility for timber floors, swimming pools and underfloor heating systems 3-20mm bed thickness 60 minutes pot life 2.5 hours set time 20kg : 4.2 – 4.5L mixing ratio Conforms to C2FT S1 EN 12004 and 12002 classification Size: 20kg Colours: White & Grey Lifetime guarantee NBS Source registered for ease of specification UltraTile ProFlex SP - Rapid Set Flexible Tile Adhesive C2FT-S1 - White (20kg bag)
Tile Kingdom - Indoor and outdoor tiles
UltraTile ProFlex SPES is a single part, standard setting, flexible adhesive for wall and floor tiles. It is specially formulated with extended workability, enhanced adhesion and flexibility, making it ideal for areas where slight movement or vibration can occur. Classified as S1 in accordance with EN 12004 it has the high level of deformation for greater tolerance to movement. Ideal for use with porcelain, mosaic, natural stone and glass tiles Extended open time S1 flexibility for timber floors, swimming pools and underfloor heating systems 3-20mm bed thickness 2 hours pot life 16 hours set time 20kg : 5.2 – 5.5L mixing ratio Conforms to C2TE S1 EN 12004 and 12002 classification Size: 20kg Colours: White & Grey Lifetime guarantee NBS Source registered for ease of specification UltraTile ProFlex SPES - Standard Set Flexible Tile Adhesive C2TE-S1 - Grey (20kg bag)
Tile Kingdom - Indoor and outdoor tiles
LEVTEC - THERE IS NO SIMPLER WAY TO ENSURE PERFECT TILING! The range includes clips, wedges and pliers which lock tiles in place to prevent slumping during drying, while also removing substrate imperfections. Their interlocking design holds the tiles together, while eliminating the effects of adhesive shrinkage and gravity issues. This unique system will enable professional tilers to set floor and wall tiles without lippage, until the adhesive is fully dry. The clips are simple and quick to use thanks to their beveled clip edges, with a strong and flexible design which does not suffer from accidental breakages. Unlike other clip and wedge-based levelling systems, the breakpoint is below the base plate, allowing total expansion once removed. In addition, the reinforced reusable wedges are designed to provide complete accuracy, so every tiling project benefits from a faultless surface. Standard clip designed for tiles with a thickness between 3 and 12mm - 1.5mm tile spacer. HOW TO CREATE A PERFECT FINISH Step 1 Spread the tile adhesive and lay the tile, then position the Levtec clips beneath the edge of the tile. The clip will act as a 1.5mm spacer when pressed firmly against the tile. Step 2 Set the adjacent tile firmly into the adhesive and butt against the Levtec clip. Then slide the Levtec wedge through the clip until both tiles are firmly levelled. Step 3 Once the tiles are locked in place, the clips and wedges need to stay in position until the adhesive sets. The joing width can be adjusted slightly during setting, without disrupting the height of the tiles. Step 4 Once the adhesive is set, the wedges can be removed using a rubber mallet. The clips should be hit in the direction of the tile joint, where they will dislodge from the breakpoint below the tile, ready for grouting.Levtec Levelling System Floor Kit - 100 Clips, 100 Wedges & Pliers
Tile Kingdom - Indoor and outdoor tiles
LEVTEC - THERE IS NO SIMPLER WAY TO ENSURE PERFECT TILING! The range includes clips, wedges and pliers which lock tiles in place to prevent slumping during drying, while also removing substrate imperfections. Their interlocking design holds the tiles together, while eliminating the effects of adhesive shrinkage and gravity issues. This unique system will enable professional tilers to set floor and wall tiles without lippage, until the adhesive is fully dry. The clips are simple and quick to use thanks to their beveled clip edges, with a strong and flexible design which does not suffer from accidental breakages. Unlike other clip and wedge-based levelling systems, the breakpoint is below the base plate, allowing total expansion once removed. In addition, the reinforced reusable wedges are designed to provide complete accuracy, so every tiling project benefits from a faultless surface. Standard clip designed for tiles with a thickness between 3 and 12mm - 1.5mm tile spacer. HOW TO CREATE A PERFECT FINISH Step 1 Spread the tile adhesive and lay the tile, then position the Levtec clips beneath the edge of the tile. The clip will act as a 1.5mm spacer when pressed firmly against the tile. Step 2 Set the adjacent tile firmly into the adhesive and butt against the Levtec clip. Then slide the Levtec wedge through the clip until both tiles are firmly levelled. Step 3 Once the tiles are locked in place, the clips and wedges need to stay in position until the adhesive sets. The joing width can be adjusted slightly during setting, without disrupting the height of the tiles. Step 4 Once the adhesive is set, the wedges can be removed using a rubber mallet. The clips should be hit in the direction of the tile joint, where they will dislodge from the breakpoint below the tile, ready for grouting.Levtec Levelling System Wedges (pack of 250)
Tile Kingdom - Indoor and outdoor tiles
LEVTEC - THERE IS NO SIMPLER WAY TO ENSURE PERFECT TILING! The range includes clips, wedges and pliers which lock tiles in place to prevent slumping during drying, while also removing substrate imperfections. Their interlocking design holds the tiles together, while eliminating the effects of adhesive shrinkage and gravity issues. This unique system will enable professional tilers to set floor and wall tiles without lippage, until the adhesive is fully dry. The clips are simple and quick to use thanks to their beveled clip edges, with a strong and flexible design which does not suffer from accidental breakages. Unlike other clip and wedge-based levelling systems, the breakpoint is below the base plate, allowing total expansion once removed. In addition, the reinforced reusable wedges are designed to provide complete accuracy, so every tiling project benefits from a faultless surface. Standard clip designed for tiles with a thickness between 3 and 12mm - 1.5mm tile spacer. HOW TO CREATE A PERFECT FINISH Step 1 Spread the tile adhesive and lay the tile, then position the Levtec clips beneath the edge of the tile. The clip will act as a 1.5mm spacer when pressed firmly against the tile. Step 2 Set the adjacent tile firmly into the adhesive and butt against the Levtec clip. Then slide the Levtec wedge through the clip until both tiles are firmly levelled. Step 3 Once the tiles are locked in place, the clips and wedges need to stay in position until the adhesive sets. The joing width can be adjusted slightly during setting, without disrupting the height of the tiles. Step 4 Once the adhesive is set, the wedges can be removed using a rubber mallet. The clips should be hit in the direction of the tile joint, where they will dislodge from the breakpoint below the tile, ready for grouting.Levtec Levelling System Clips 12mm, 1.5mm spacer: Pack of 500
Tile Kingdom - Indoor and outdoor tiles
LEVTEC - THERE IS NO SIMPLER WAY TO ENSURE PERFECT TILING! The range includes clips, wedges and pliers which lock tiles in place to prevent slumping during drying, while also removing substrate imperfections. Their interlocking design holds the tiles together, while eliminating the effects of adhesive shrinkage and gravity issues. This unique system will enable professional tilers to set floor and wall tiles without lippage, until the adhesive is fully dry. The clips are simple and quick to use thanks to their beveled clip edges, with a strong and flexible design which does not suffer from accidental breakages. Unlike other clip and wedge-based levelling systems, the breakpoint is below the base plate, allowing total expansion once removed. In addition, the reinforced reusable wedges are designed to provide complete accuracy, so every tiling project benefits from a faultless surface. Standard clip designed for tiles with a thickness between 3 and 12mm - 1.5mm tile spacer. HOW TO CREATE A PERFECT FINISH Step 1 Spread the tile adhesive and lay the tile, then position the Levtec clips beneath the edge of the tile. The clip will act as a 1.5mm spacer when pressed firmly against the tile. Step 2 Set the adjacent tile firmly into the adhesive and butt against the Levtec clip. Then slide the Levtec wedge through the clip until both tiles are firmly levelled. Step 3 Once the tiles are locked in place, the clips and wedges need to stay in position until the adhesive sets. The joing width can be adjusted slightly during setting, without disrupting the height of the tiles. Step 4 Once the adhesive is set, the wedges can be removed using a rubber mallet. The clips should be hit in the direction of the tile joint, where they will dislodge from the breakpoint below the tile, ready for grouting.Levtec Levelling System Clips 12mm, 1.5mm spacer: Pack of 2000
Tile Kingdom - Indoor and outdoor tiles
LEVTEC - THERE IS NO SIMPLER WAY TO ENSURE PERFECT TILING! The range includes clips, wedges and pliers which lock tiles in place to prevent slumping during drying, while also removing substrate imperfections. Their interlocking design holds the tiles together, while eliminating the effects of adhesive shrinkage and gravity issues. This unique system will enable professional tilers to set floor and wall tiles without lippage, until the adhesive is fully dry. The clips are simple and quick to use thanks to their beveled clip edges, with a strong and flexible design which does not suffer from accidental breakages. Unlike other clip and wedge-based levelling systems, the breakpoint is below the base plate, allowing total expansion once removed. In addition, the reinforced reusable wedges are designed to provide complete accuracy, so every tiling project benefits from a faultless surface. Standard clip designed for tiles with a thickness between 3 and 12mm - 1.5mm tile spacer. HOW TO CREATE A PERFECT FINISH Step 1 Spread the tile adhesive and lay the tile, then position the Levtec clips beneath the edge of the tile. The clip will act as a 1.5mm spacer when pressed firmly against the tile. Step 2 Set the adjacent tile firmly into the adhesive and butt against the Levtec clip. Then slide the Levtec wedge through the clip until both tiles are firmly levelled. Step 3 Once the tiles are locked in place, the clips and wedges need to stay in position until the adhesive sets. The joing width can be adjusted slightly during setting, without disrupting the height of the tiles. Step 4 Once the adhesive is set, the wedges can be removed using a rubber mallet. The clips should be hit in the direction of the tile joint, where they will dislodge from the breakpoint below the tile, ready for grouting.Levtec Levelling System Clips 12mm, 1.5mm spacer: Pack of 100
Tile Kingdom - Indoor and outdoor tiles
LEVTEC - THERE IS NO SIMPLER WAY TO ENSURE PERFECT TILING! The range includes clips, wedges and pliers which lock tiles in place to prevent slumping during drying, while also removing substrate imperfections. Their interlocking design holds the tiles together, while eliminating the effects of adhesive shrinkage and gravity issues. This unique system will enable professional tilers to set floor and wall tiles without lippage, until the adhesive is fully dry. The clips are simple and quick to use thanks to their beveled clip edges, with a strong and flexible design which does not suffer from accidental breakages. Unlike other clip and wedge-based levelling systems, the breakpoint is below the base plate, allowing total expansion once removed. In addition, the reinforced reusable wedges are designed to provide complete accuracy, so every tiling project benefits from a faultless surface. Standard clip designed for tiles with a thickness between 3 and 12mm - 1.5mm tile spacer. HOW TO CREATE A PERFECT FINISH Step 1 Spread the tile adhesive and lay the tile, then position the Levtec clips beneath the edge of the tile. The clip will act as a 1.5mm spacer when pressed firmly against the tile. Step 2 Set the adjacent tile firmly into the adhesive and butt against the Levtec clip. Then slide the Levtec wedge through the clip until both tiles are firmly levelled. Step 3 Once the tiles are locked in place, the clips and wedges need to stay in position until the adhesive sets. The joing width can be adjusted slightly during setting, without disrupting the height of the tiles. Step 4 Once the adhesive is set, the wedges can be removed using a rubber mallet. The clips should be hit in the direction of the tile joint, where they will dislodge from the breakpoint below the tile, ready for grouting.Levtec Levelling System Pliers
Tile Kingdom - Indoor and outdoor tiles