Compatible: Applicable to for Mercedes-Benz/for Land Rover/for Porsche/for Ford, This Universal Blue Fakra (Code Z) to Male RCA Socket Cable Allows You to Keep the for Original Back Cameras from Various Vehicles, Such as for Ford/for Land Rover/for Porsche/for Jaguar/for Mercedes Compatible, Your Part Number System Will Provide Fakra Connection on the Host These Are Usually Green Or Brown, Not Always on the Display Itself, but Usually on the Media The System to Which the Monitor Is Connected. If It Is Connected to a Separate Module, the Fakra Extension May This Adapter Also Allows You to Adjust the Video Signal and Connect It with the Video Input, Such as DVD, Video Source, DVB-T Tuner, Etc. Most Commonly, This Adapter Is Used to Retain Factory Reversal. The Camera Is Used with the after-Sales Host Note: This Cable Is Only Compatible with Single Fakra Connection, and Dual Fakra Is Not Compatible. Installation guide not included, we strongly recommend you seek professional installation. Please check as much as possible to make sure the item is what you need. Tips:The product may be updated constantly ,Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use. Colour:As Shown Material:Plastic Package Contents: 1 * Car Rear Sight Conversion Wire Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
An OBD for TOOL 16PIN connector into the vehicle's OBD-11 communications port;Turn the ignition switch to ON, then OBD for TOOL light lit, and the device will call and the second tone, said the device is working properly;and then need to restore the maintenance mode switch (25% -50% -75% -100% can be ) at this time there will be frequency BUSY indicator light, and the device will beep tones, 10 seconds to complete data recovery, whichAlways when the BUSY indicator.W211/R230 ABS/ TOOL (Repair Code C249F) for Ben z have W211 and R230 with ABS system.instruction as follows:TIPS: CODE C249F, OPERATION TIME OF COMPONENT A7/3 IS EXCEEDED ( HYDRAULIC UNIT)The above tips that show internal fault of control unit, you have to replace the control module and using W211/R230 TOOL that can be easily repaired without replace the new control module.For Safety Precautions had stated that before attempting to repair the brake system on its models W211 (E Class) and R230 (SL Class), the Sensotronic Brake Control () system must be deactivated first using its STAR-DIAGNOSIS tester.Deactivation of the system is absolutely necessary before carrying out any maintenance work onthe brakes like changing of pads, discs and fluids because the system is under a pressure of 140 bars. Mechanics who perform brake services on these car models must have the proper tools to avoid the risk of injuries to themselves and damage to the brake system.Until the introduction of this inexpensive, convenient, light, safe and easy to use tool is another alternative to the STAR-DIAGNOSIS tester when working on system. It can perform the tasks equally well which is efficient and safety.Colour:GreenMaterial:Plastic + Electronic ComponentsPackage Contents:1 x W211/R230 ABS/ Tool1 x OBD2 Cable1 x CD SoftwareOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Features: 1.Simple installation, just plug and play, convenient for using 2.Precision manufacturing ensures stable and professional performance. 3.Original standard, direct replacement for the old or broken one. 4.Quality plastic and metal material, lightweight, corrosion resistant and durable. 5.Built to meet standard specification, strictly follow factory quality control. Specification: Condition: New_x000D_ Item Type: Stereo Harness_x000D_ Material: Plastic + Metal_x000D_ Color: As picture shown_x000D_ Connector Size: Approx. 24 x 11mm/0.9 x 0.4in_x000D_ Application: Fits for Pioneer 2003-on PackageList: 1 x Stereo Harness Note: Before purchase, check the consistency of the CD player interface with the appearance and interface of our products.
Fruugo United Kingdom
An OBD for TOOL 16PIN connector into the vehicle's OBD-11 communications port;Turn the ignition switch to ON, then OBD for TOOL light lit, and the device will call and the second tone, said the device is working properly;and then need to restore the maintenance mode switch (25% -50% -75% -100% can be ) at this time there will be frequency BUSY indicator light, and the device will beep tones, 10 seconds to complete data recovery, whichAlways when the BUSY indicator.W211/R230 ABS/ TOOL (Repair Code C249F) for Ben z have W211 and R230 with ABS system.instruction as follows:TIPS: CODE C249F, OPERATION TIME OF COMPONENT A7/3 IS EXCEEDED ( HYDRAULIC UNIT)The above tips that show internal fault of control unit, you have to replace the control module and using W211/R230 TOOL that can be easily repaired without replace the new control module.For Safety Precautions had stated that before attempting to repair the brake system on its models W211 (E Class) and R230 (SL Class), the Sensotronic Brake Control () system must be deactivated first using its STAR-DIAGNOSIS tester.Deactivation of the system is absolutely necessary before carrying out any maintenance work onthe brakes like changing of pads, discs and fluids because the system is under a pressure of 140 bars. Mechanics who perform brake services on these car models must have the proper tools to avoid the risk of injuries to themselves and damage to the brake system.Until the introduction of this inexpensive, convenient, light, safe and easy to use tool is another alternative to the STAR-DIAGNOSIS tester when working on system. It can perform the tasks equally well which is efficient and safety.Colour:GreenMaterial:Plastic + Electronic ComponentsPackage Contents:1 x W211/R230 ABS/ Tool1 x OBD2 Cable1 x CD SoftwareOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Compatible: Applicable to for Mercedes-Benz/for Land Rover/for Porsche/for Ford, This Universal Blue Fakra (Code Z) to Male RCA Socket Cable Allows You to Keep the for Original Back Cameras from Various Vehicles, Such as for Ford/for Land Rover/for Porsche/for Jaguar/for Mercedes Compatible, Your Part Number System Will Provide Fakra Connection on the Host These Are Usually Green Or Brown, Not Always on the Display Itself, but Usually on the Media The System to Which the Monitor Is Connected. If It Is Connected to a Separate Module, the Fakra Extension May This Adapter Also Allows You to Adjust the Video Signal and Connect It with the Video Input, Such as DVD, Video Source, DVB-T Tuner, Etc. Most Commonly, This Adapter Is Used to Retain Factory Reversal. The Camera Is Used with the after-Sales Host Note: This Cable Is Only Compatible with Single Fakra Connection, and Dual Fakra Is Not Compatible. Installation guide not included, we strongly recommend you seek professional installation. Please check as much as possible to make sure the item is what you need. Tips:The product may be updated constantly ,Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use. Colour:As Shown Material:Plastic Package Contents: 1 * Car Rear Sight Conversion Wire Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Plug and play, full hardware conversion processing, with high image clarity, good brightness, high contrast and good image quality characteristics Support HDMI1.3 version (compatible with 1.0/1.1/1.2) and automatically detect HDCP High bandwidth capability, up to 1920*1280@60Hz HDMI input interface, connect for PS3 / XBOX360 / PC graphics card / HD player / Blu-ray DVD / set-top box / laptop, etc. Colour:Black Material:ABS Package Contents: 1 * converter 1 * conversion cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
[HDMI ARC Audio Extractor]Audio Return Channel function and audio extract to digital and analog signal.That means, when connected to HDMI ARC device,such as your TV with HDMI ARC port,audio will be return from TV and output to SPDIF,Coaxial,L+R RCA,3.5mm;Note: Please set your TV audio output to PCM, LPCM [192KHz DAC Digital to Analog Converter]Input SPDIF or Coaxial Digital signal,Output to L+R Analog Audio,3.5mm Jack stereo sound;Note: Please set your TV audio output to PCM, LPCM [HDMI ARC CEC Volume Adjustable]When switch to HDMI ARC mode, volume can be countrolled by TV's remote controller (Attention: CEC is only for HDMI 1.4 version or ab ove,both of your device and HDMI cable must be required,Don't forget to set the CEC control configurations of your TV,or else not available for volume control) [SPDIF to Coaxial Bidirection Converter]SPDIF (Toslink/Optical) convert to Coaxial, Coaxial convert to SPDIF(Toslink/Optical); [Mini Size and Easy to Use]Aluminum shell,Small size,portable,compatible with for Blu-ray DVD,HDTV,TV,TV Box,Game playstation PS2,PS3,PS4,Xbox Style: HDMI ARC Audio Extractor Audio format: PCM Audio Sampling rate: 192Khz Mode choice: ARC, coaxial, optical Size:4 x 2.4 x 0.8 inches Setting Method: Please Set the Audio Output to PCM or LPCM before Using; Connection and Operation: 1. Connect the HDMI port of the adapter to the HDMI (ARC) port of the TV through the HDMI cable 2. Connect the converter's optical fiber and coaxial input port with the corresponding audio interface of DVD or PS3 through optical fiber cable or coaxial cable 3. Connect to the amplifier system through optical fiber cable, coaxial cable or RCA cable and 3.5mm audio cable 4. Connect the USB power cord to the Micro-USB interface of the converter 5. Switch to the corresponding audio by flipping the switch Material:Aluminum alloy colour:black PackageContents: 1 *
Fruugo United Kingdom
1. Working environment with strong electricity and strong interference: some circuits contain strong electricity and strong interference (such as high-voltage electricity, inverter, motor drive, etc.) environment, which involves the connection with the computer. It must be isolated to ensure the computer ,Personal safety. 2. Noise-sensitive areas: Everyone knows that computers are a big noise source. In noise-sensitive areas, we can use this device to isolate the USB interface. Such as high-precision USB data acquisition system, HIFI audio system. 3. USB debugging equipment: such as JTAG/SWD emulators with various USB interfaces, ISP/ASP/IAP/ICP downloaders, etc. When you are often unable to connect or emulate abnormalities during debugging, you can use a USB isolator to try to improve. 4. Various industrial USB devices: In the industrial environment, USB devices often crash, such as USB mouse, keyboard, USB to serial port and other communication devices. The USB isolator can effectively reduce the crash and damage probability of these devices in an industrial environment. Sometimes it is necessary to extend the USB cable, the USB isolator can act as a very USB repeater, and can also isolate the ground pressure difference between upstream and downstream devices. 5. Other common USB peripherals, such as mouse, keyboard, USB sound card, USB flash drive, printer, digital camera, USB hub (HUB), USB camera. Tested and supported devices: Full-speed devices: for USB flash drives, digital cameras, card readers, mobile hard drives, USB shields, USB hubs, AVRJTAG, AVRISP, AVRISPMKII, S-Lab, JET51, J-Link, FET430UIF, PICKIT2, XDS100 , LPC-Link, ICD2, USB to serial port (FT232, CP2102, PL2303, CH341 chips). Tested unsupported devices USB wireless network card, some USB3.0 flash drives. Technical index: Compatible with USB2.0 ADUM3160 isolation voltage: 2500V Power module isolation voltage: 1500V Supports USB full-spe
Fruugo United Kingdom