Improved processing, greater versatility, but familiar in design, the Nikon Z7 II Mirrorless Camera with Z 24-50mm f/4-6.3 Lens takes everything that was great from the original and ups its capabilities even more. Sporting a high-resolution 45.7MP FX-format BSI CMOS sensor and dual EXPEED 6 image processors, the Z 7II is clearly aimed at the detail-obsessed image-maker. The sensor's design omits the optical low-pass filter for greater detail recording capability and the sensor supports a native sensitivity range down to ISO 64 for lush, rich capture. Updated processing also yields faster speeds, including a quickened 10 fps continuous shooting rate and deeper buffer for working with moving subjects. UHD 4K 60p video is supported, too, with the option to record externally in 10-bit using N-Log or HLG (HDR) modes). The sensor also incorporates a 493-point phase-detection AF system, which now supports Eye-Detect AF in Wide-Area AF modes and during movie recording, and permits focusing in low-light down to -4.5 EV. Additionally, 5-axis in-body Vibration Reduction helps to reduce the appearance of camera shake with any mounted lens. Balancing the imaging, the Z 7II retains its overall physical design, however it has been updated with a new dual memory card slot interface to hold one CFexpress Type B card and one SD UHS-II card for more flexible storage. Both a high-res 3.6m-dot OLED EVF and rear 3.2" 2.1m-dot tilting touchscreen LCD lend versatility to image composition and playback, and SnapBridge wireless connectivity can be used for remote camera control, image sharing to a mobile device, and even over-the-air firmware updates. {Key Features} - 45.7MP FX-Format BSI CMOS Sensor - Dual EXPEED 6 Image Processors - UHD 4K60 Video; N-Log & 10-Bit HDMI Out - 10 fps Cont. Shooting, ISO 64-25600 - 493-Point Phase-Detect AF System - 3.6m-Dot OLED Electronic Viewfinder - 3.2" 2.1m-Dot Tilting Touchscreen LCD - 5-Axis In-Body Vibration Reduction - Dual Memory Card Slots {Box Contents} - Nikon Z 7II Mirrorless Digital Camera (Body Only) - Nikon NIKKOR Z 24-50mm f/4-6.3 Lens - Nikon EN-EL15c Rechargeable Lithium-Ion Battery - Nikon MH-25A Battery Charger for EN-EL15 Li-Ion Battery - Nikon EH-7P Charging AC Adapter - Nikon UC-E24 USB Cable - HDMI/USB Cable Clip - Nikon BS-1 Hot Shoe Cover for Nikon SLR Cameras - Nikon AN-DC19 Camera Strap - Nikon BF-N1 Body Cap - Nikon DK-29 Rubber Eyecup {Product video}
Next Day Camera Shop
Please Note Tamron Lenses have a 5 Year WarrantyThe dynamic Tamron 11-20mm f/2.8 Di III-A RXD compatible with Sony E (B060S) is a fast-aperture ultra wide-angle zoom lens for Sony E-mount APS-C mirrorless cameras. It features the world's first f/2.8 maximum aperture for Sony E-mount APS-C mirrorless in this category and has a compact and lightweight design. This ultra-wide lens is particularly suitable for landscape, astrophotography, and architectural shooting. Its bright f/2.8 constant maximum aperture complements this range and affords increased control over depth of field along with enhanced low-light performance. The optical design incorporates one XLD element, two LD elements, and two glass-molded aspherical elements to produce a highly corrected image with reduced chromatic aberrations and color fringing for improved clarity and color accuracy. Individual elements also feature Tamron's BBAR coating, which suppresses flare and ghosting for greater contrast when working in backlit and harsh lighting conditions. A responsive RXD stepping drive motor enables quick, near silent autofocus performance to suit stills and video. The minimum object distance is just 5.9" at the widest end of the zoom range, unlocking powerful wide-angle macro shooting capability with a unique perspective that makes near objects look larger, and distant objects smaller. Additionally, the f/2.8 maximum aperture produces a shallower depth-of-field that creates soft bokeh background details. Moisture-resistant construction protect the lens under inclement conditions, and a fluorine coating on the front lens element protects against dust, dirt, and smearing. {Key Features} - Sony E-Mount / APS-C Format - 17-30mm (35mm Equivalent) - Aperture Range: f/2.8 to f/16 - 1x XLD, 2x GM Asph., and 2x LD Elements - BBAR-G2 Lens Coating - Rapid eXtra Silent Stepping Drive Motor - Weather-Sealed Construction - Rounded 7-Blade Diaphragm - 67mm Front Filter Size - Petal-Type Lens Hood Included {Box Contents} - Tamron 11-20mm f/2.8 Di III-A RXD Lens for Sony E - Petal-Type Lens Hood - Front Lens Cap - Rear Lens Cap
Next Day Camera Shop
Please Note Tamron Lenses have a 5 Year WarrantyA versatile wide-angle to standard-length zoom, the Tamron 20-40mm f/2.8 Di III VXD Lens compatible with Sony E (A062S) spans a useful range of focal lengths for everyday shooting. Offered here with a Sony E-mount, this compact and portable lens is well-suited for everything from landscapes and cityscapes to street scenes and portraits. An excellent travel companion, this full-frame lens delivers beautiful images across the entire zoom range and is a great choice for still photography, vlogs, and other video content. The lens features a constant f/2.8 maximum aperture enabling you to shoot in difficult lighting conditions, and with a minimum focusing distance of just 6.7", this optic delivers close-range functionality for dynamic wide-angle macro shots. A VXD (Voice-coil eXtreme-torque Drive) linear motor focus mechanism provides fast, quiet, and precise autofocus performance throughout the zoom range, and the lens also supports Sony's Fast Hybrid AF and Eye AF features with select cameras. Additionally, the lens is compatible with Tamron Lens Utility software for customizing lens functions and updating firmware. {Key Features} - E-Mount Lens/Full-Frame Format - Maximum Aperture: f/2.8 - VXD Linear Motor Focus Mechanism - Minimum Focusing Distance: 6.7" - Moisture-Resistant Construction - 67mm Front Filter Size {Box Contents} - Tamron 20-40mm f/2.8 Di III VXD Lens for Sony E - Front Lens Cap - Rear Lens Cap - Lens Hood
Next Day Camera Shop
Designed to handle the demands of both still photography and video capturing, the Canon RF 24mm f/1.4L VCM Lens is a fast wide-angle prime designed for full-frame RF-mount camera systems. With its bright f/1.4 maximum aperture and 11-bladed diaphragm, working in low-light conditions isn't an issue, nor is producing dreamy, complementary bokeh around your subjects. This hybrid lens design incorporates a video-friendly Voice Coil Motor (VCM) rear focus system with a Nano USM (Ultrasonic Motor) for precise autofocus and near-silent lens operation. Its dedicated manual iris ring and AF/MF switch offer users heightened focus control and allow for swift settings and adjustments. Belonging to the L-series, this prime lens promises excellent durability and features a weather-resistant design that protects against dust and moisture. Two ultra-low dispersion elements and one aspherical element help produce excellent image quality while minimizing chromatic aberrations. To prevent ghosting and flare considerably, Canon has applied ASC (Air Sphere Coating), SSC (Super Spectra Coating), SWC (Sub Wavelength Coating), and Fluorine coatings to this lens. {Key Features} - Full-Frame Format | f/1.4 to f/16 - Extremely Fast Design, Advanced Optics - Voice Coil Motor (VCM) for Rear Focus - Nano USM for Fast Floating Autofocus - Manual Iris/Full-Time Focus Rings - Air Sphere (ASC) Coating - One Aspherical Element, Two UD Elements - Rounded 11-Blade Diaphragm - Weather-Sealed Design - Attachable Rear Gel Filter Holder {Box Contents} - Canon RF 24mm f/1.4 L VCM Lens (Canon RF) - Canon LP1219 Soft Lens Case - Canon E-67 II Lens Cap - Canon Lens Dust Cap RF - Canon EW-73G Lens Hood - Rear Filter Holder
Next Day Camera Shop
Spanning wide-angle to super telephoto, the Nikon AF-S DX 18-300mm f/3.5-6.3G ED VR Lens is an ideal single-lens solution for photographing in a wide variety of situations. Designed for DX-format cameras, this 27-450mm equivalent zoom features an advanced optical design comprising both aspherical and extra-low dispersion glasses, which help to reduce aberrations and distortions throughout the zoom range for notable clarity and sharpness. A Super Integrated Coating has also been applied to suppress flare and ghosting when working in backlit or harsh lighting conditions. Benefitting the optics is a four stop-effective VR image stabilization system, which minimizes the appearance of camera shake in order to produce sharper handheld imagery. Additionally, a Silent Wave Motor affords quick, quiet autofocus performance.{Key Features} - F Mount Lens/DX Format - 27-450mm (35mm Equivalent) - Aperture Range: f/3.5 to 22 - Three Aspherical Elements - Three ED Glass Elements - Silent Wave Motor AF & Internal Focusing - Vibration Reduction Image Stabilization - Super Integrated Coating - Rounded 7-Blade Circular Diaphragm - Filter Thread: 67mm {Box Contents} - Nikon AF-S DX NIKKOR 18-300mm f/3.5-6.3G ED VR Lens - 67mm Snap-On Lens Cap - LF-4 Rear Lens Cap
Next Day Camera Shop
The Canon XA75 Video Camera with 3G-SDI Output is a compact, lightweight camera featuring UHD 4K capture, a 1" CMOS sensor, two XLR audio inputs, and one each mini-HDMI and BNC 3G-SDI output, which fits right into the ENG category for documentary or journalism-style productions. Updated from its XA55 predecessor, this model features a larger 3.5mm LCD capacitive touchscreen display, a higher resolution tiltable 0.36" OLED EVF, OSD metadata recording, and fast USB Type-C video-only output with UVC support for livestreaming to a computer. The lens optics include an integrated 15x HD optical zoom, a nine-bladed circular iris for more natural highlights, and wide DR gamma support for low-light recording. The camera's pro-style features include Dual-Pixel and Contrast autofocus, fast- and slow-motion recording, full manual control, optical and electronic image stabilization, a 3.5" touchscreen LCD, user-assignable buttons, infrared mode, and a DIG!C DV 6 image processor with high sensitivity and low noise. The XA75 also has display monitoring features such as zebra, color bars, and test tone, plus a built-in neutral density filter mechanism. The camera records UHD 4K30 and Full HD 1080p60 captured to dual SD card slots in XF-AVC and MP4 formats, and it outputs to mini-HDMI and 3G-SDI ports. The dual SD card slots allow for automatic switching from one card to another, as well as simultaneous recording to both. The camera can output up to 1920 x 1080p 10-bit 4:2:2 video at 59.94 fps via its mini-HDMI and 3G-SDI outputs. On the audio side, the XA75 features up to four channels of LPCM audio with manual/automatic recording levels, two XLR inputs with phantom power, and a 3.5mm stereo mini input. It features a built-in stereo microphone as well as a headphone jack. {Key Features} - 1" CMOS Sensor, DIG!C DV 6 Processor - Up to UHD 4K30 Video Recording - Mini-HDMI and 3G-SDI Outputs - Integrated 15x Optical Zoom Lens - Dual XLR and Mic/Line Audio Input - USB Type-C Output with UVC Support - 5-Axis Optical Image Stabilization - Dual-Pixel CMOS Autofocus Feature - Dual SD Relay and Simultaneous Recording - 3.5" Touchscreen LCD, Tiltable OLED EVF {Box Contents} - Canon XA75 UHD 4K30 Camcorder with Dual-Pixel Autofocus - Canon PD-E1 USB Power Adapter - Canon BP-820 Lithium-Ion Single Battery Pack (1780mAh) - Lens Hood with Lens Cover - Handle - Microphone Holder {Product video}
Next Day Camera Shop
OEM (Original Equipment Manufacturer) lamps are produced by the projector manufacturer and are identical to the lamps supplied originally with the projector. The majority of projector manufacturers will use bulbs from the world leading bulb manufacturers (e.g. Philips, Osram, Ushio etc.) and fit them in their own modules to produce the complete lamps. These lamps are produced to a very high standard and in a controlled environment, ensuring that the end user will benefit from the best performance possible. All OEM lamps are supplied with the 3 month manufacturer warranty.
AV Parts Master
OEM (Original Equipment Manufacturer) lamps are produced by the projector manufacturer and are identical to the lamps supplied originally with the projector. The majority of projector manufacturers will use bulbs from the world leading bulb manufacturers (e.g. Philips, Osram, Ushio etc.) and fit them in their own modules to produce the complete lamps. These lamps are produced to a very high standard and in a controlled environment, ensuring that the end user will benefit from the best performance possible. All OEM lamps are supplied with the 3 month manufacturer warranty.
AV Parts Master