SY 3A 40W is a 40W 70 100V Speaker Line output driver, with 3 Audio inputs Microphone Line with Mixer. Inputs This Mono Amplifier accepts various input types. Analogue L R analogue inputs via a 3.5mm TRS Jack and also RCA inputs. Digital Audio Digital audio via an S PDIF Optical input. Microphone Line A Microphone input is complimented by switchable 48v phantom power and is equipped with an Auto Ducking feature for professional talk over effect. This is user selectable via RS232 command. What does this do? With auto Ducking enabled, when someone speaks into the Microphone, then it will lower (or Duck) the Level of the Programme Audio from your other inputs. The Mic input can be set to MIC level with selectable 48V phantom power or set to LINE level. Internally Summed to Mono All inputs are summed internally to provide a Mono output, which is rated at 40W. 100V 70V Line Drive Speaker Output This Amplifier drives a 40 Watt speaker load. For use with 'constant voltage' or 'high impedance' speaker systems that contain a special step down transformer. Auto Mute The unit mutes itself when no audio signal is detected. Control Equipped with RS232, Infra Red and Button controls. RS232 Control The 3A 40W is controllable by RS232, with Volume Up, Down, Balance and Mute along with Absolute Volume commands for exact and accurate system control. Infra Red Control An IR Handset is included Front Panel Buttons Button controls for Bass, Treble, Volume adjustments and Input selection. Connections All connections are on the rear panel via relevant connectors, along with the MIC setting controls. Rack mountable by using the RS01 accessory shelf This is an ideal product for either rack installation or fitting into credenzas and AV cupboards as found in many boardroom and classroom equipment installation scenarios. Features Two analogue L R inputs, 1x Optical digital input plus a balanced MIC Line input. Mono output. 40Watts output powering 70V or 100V Line RS232 controllable Absolute Volume commands Balance and Mute commands MIC Ducking 48V Phantom Power
AV Parts Master
Twisted Pair Patch Cable with RJ45 connectors Cat.6A S FTP PIMF, LSZH Integrated snagless connector for latch protection Gold plated pins for better conductivity and elimination of signal loss 10 year warranty Cat.6A S FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase T. Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz. These cables are manufactured and tested according to the ISO IEC 11801 specification. The cables are packaged individually in a polybag. The gold plated contacts ensure reliable, corrosion free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The halogen free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions. Available colours: Black, Blue, Grey, Red, White
AV Parts Master
Laptop Network USB C Trolley The zioxi Laptop Network USB C trolley provides charging and data connections for 16 laptops or tablets via USB C. The trolley is connected to a LAN via an Ethernet patch cable. Each laptop or iPad is connected via a single USB C cable providing both power and data and enabling remote management of all connected devices. Laptops and tablets are stored horizontally on shelves making access easy and only a short length of USB C cable is presented to each shelf. The laptop USB C chargers, power management module, ethernet switch and cables, USB C conversion electronics and high capacity silent fan are all neatly housed in the separate and secure power bay. An Unmanaged NetGear Gigabit Ethernet switch is supplied as standard or alternatively there is the flexibility to choose fit your own 1U rack mountable switch. Laptop charging trolley with networked USB C connectivity Provides charging, Ethernet network connectivity via device USB C ports and secure storage for 16 Laptops and tablets (up to 16 screen sizes see shelf dimensions). Horizontal device storage for easy access, with only short lengths of cable presented to each shelf. Key features: Compact, simple, elegant unobtrusive design Single USB C cable for each laptop providing a single power and data connection Single external RJ45 Ethernet port connection to the trolley NetGear Gigabit Ethernet unmanaged switch as standard or the option to select any 1U rack mount switch (customer supply and fit) Active, thermally controlled mechanical ventilation via 120mm quiet fan to manage trolley temperature during laptop updates USB C power provided either by the manufacturer supplied AC adapters and USB C cables (customer supply and fit) or selecting the zioxi integrated USB C power cables option Separate, secured power bay with shelves for USB C charger power bricks or wall chargers Cable management with only short lengths of a single USB C power and data cable presented to the front of each shelf so cables are all neat tidy, very simple to connect and can t go missing Sequential soft start power management module as standard to prevent fuse and circuit breaker issues Choice of RFID access card, digital code or key lock (master override keys provide with RFID and code locks) Door folds back 270 degrees preventing damage, providing easy access and with magnetic retention Laptop and tablet Ethernet adapter MAC addresses are not visible via the switch, use of remote device management software is recommended if individual device identification is required
AV Parts Master
Laptop Network USB C Trolley The zioxi Laptop Network USB C trolley provides charging and data connections for 16 laptops or tablets via USB C. The trolley is connected to a LAN via an Ethernet patch cable. Each laptop or iPad is connected via a single USB C cable providing both power and data and enabling remote management of all connected devices. Laptops and tablets are stored horizontally on shelves making access easy and only a short length of USB C cable is presented to each shelf. The laptop USB C chargers, power management module, ethernet switch and cables, USB C conversion electronics and high capacity silent fan are all neatly housed in the separate and secure power bay. An Unmanaged NetGear Gigabit Ethernet switch is supplied as standard or alternatively there is the flexibility to choose fit your own 1U rack mountable switch. Laptop charging trolley with networked USB C connectivity Provides charging, Ethernet network connectivity via device USB C ports and secure storage for 16 Laptops and tablets (up to 16 screen sizes see shelf dimensions). Horizontal device storage for easy access, with only short lengths of cable presented to each shelf. Key features: Compact, simple, elegant unobtrusive design Single USB C cable for each laptop providing a single power and data connection Single external RJ45 Ethernet port connection to the trolley NetGear Gigabit Ethernet unmanaged switch as standard or the option to select any 1U rack mount switch (customer supply and fit) Active, thermally controlled mechanical ventilation via 120mm quiet fan to manage trolley temperature during laptop updates USB C power provided either by the manufacturer supplied AC adapters and USB C cables (customer supply and fit) or selecting the zioxi integrated USB C power cables option Separate, secured power bay with shelves for USB C charger power bricks or wall chargers Cable management with only short lengths of a single USB C power and data cable presented to the front of each shelf so cables are all neat tidy, very simple to connect and can t go missing Sequential soft start power management module as standard to prevent fuse and circuit breaker issues Choice of RFID access card, digital code or key lock (master override keys provide with RFID and code locks) Door folds back 270 degrees preventing damage, providing easy access and with magnetic retention Laptop and tablet Ethernet adapter MAC addresses are not visible via the switch, use of remote device management software is recommended if individual device identification is required
AV Parts Master
Cat.5e U UTP PVC network cable with support for bandwidth up to 100MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase T. Cat.5e cable, designed for operating frequencies up to 100MHz. The unshielded version (U UTP) is designed in its electrophysical parameters (NExT, FExT etc.) in such a way that it can be used for Gigabit Ethernet despite the lack of shielding. These cables are manufactured and tested according to the ISO IEC 11801 specification. The cables are packaged individually in a polybag. The gold plated contacts ensure reliable, corrosion free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
AV Parts Master
Cat.6A U UTP Ultra slim network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10GBase T. Cat 6A cable, for operating frequencies up to 500MHz, unshielded with single twisted pair (U UTP). Designed as ultra slim cable for use in environments with restricted or limited installation space. These cables are manufactured and tested according to the ISO IEC 11801 specification. The cables are packaged individually in a polybag. The gold plated contacts ensure reliable, corrosion free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The very flexible and thin cable construction allows the cables to be installed in restricted or limited spaces such as server rooms or network hubs. Available lengths: 0.3m, 1m, 1.5m, 2m, 3m, 5m.
AV Parts Master
The Lindy CAT 6A Coupler is a compact solution for connecting two Network cables together for extended distances. Simply connect your RJ45 ethernet cables to either side and you are ready to go.
AV Parts Master
Cat.6 U UTP PVC network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase T. Cat.6 cable for operating frequencies up to 250MHz. The unshielded version (U UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameters (NExT, FExT, etc.) despite the lack of shielding. These cables are manufactured and tested according to the ISO IEC 11801 specification. The cables are packaged individually in a polybag. The gold plated contacts ensure reliable, corrosion free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
AV Parts Master