Special Features : Taill Lamp<br> Material Type : Plastic<br> Item Diameter : 10inch<br> Item Type : Tail Light Assembly<br> Color : Red<br> Voltage : 12V<br> Interface Type : T15<br> Lumens : 2400Lm<br> Item Weight : 1.5kg<br> Model Name : Tail Light With No Bulbs<br> Wattage : E-386 E-HWD-500<br> Origin : Mainland China<br> OEM NO. : Taillights<br> Fitment 1 : For Honda CRV 2012 2013 2014<br> Fitment 2 : For Honda CRV 2015 2016<br> Fitment 3 : For Honda CR-V 2012 2013 2014<br> Fitment 4 : For Honda CR-V 2015 2016
Fruugo United Kingdom
1. Built-in digital to analog DAC chip, wider compatibility and better sound quality. One-piece stretched TYPE-C parts, sturdy and durable. Gold-plated output plug, good contact performance, anti-oxidation. 2. With cotton woven mesh, strong tensile strength and beautiful appearance. The shell is made of aluminum alloy oxidation treatment, which feels good and durable. 3. TYPE-C male to dual 6.35 mono cable, this cable is used to connect the TYPE-C interface jack output of your smartphone, laptop/PC or similar devices to 2 x 6.35mm jack input devices, such as Speakers, mixing consoles, etc. 4. This cable can be used to split the stereo audio signal of type-c interface of mobile phone and computer into two 6.35 TS (left/right) mono signals. 5. Built-in decoding chip, widely compatible with Android mobile phones, tablet computers, notebook computers and other devices with various type-c interfaces. It's bifurcation part is closer to the 6.35 end, and the bifurcation point is about 35CM away from the 6.35 interface. Size: 2Meters / 3Meters / 1Meters Material: Gold plating + copper wire + braided mesh + aluminum alloy colour: black<br><br>Package Contents: 1 x Type C to Dual 6.35mm Audio Stereo Cable Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Universal sensor for the running machine<br> Replace the sensor to make the running machine work properly and measure the speed accurately<br> *When the engine of running machine stop and appear error codes after the treadmill motor starts for a few seconds, that means the sensor is fault<br> Controller interface is 2 pin<br> *2 Types: Round Head, Flat Head<br> Note:<br> We do our best to ensure all s and product images are as accurate as possible. Some color variations may occur between computer monitor.<br> Your understanding will be highly appreciated<br> Package Included:<br> 1x Treadmill Magnetic Sensor
Fruugo United Kingdom
Fully compliant with DVB-T/T2, H.264, H.265, MPEG-2, MPEG-4 standards Video output resolution: 480/576/480 p/576 p/720 p/1080 i/1080 p Video decoding standards: MPEG-4 Part 10, MPEG-2 ISO, IEC 13818, MPEG-4, MPEG-2, H.264 standards Audio decoding standards: MPEG-1, MPEG-2, AAC-LC, WMA Video encoding and decoding standards: avi, dat, ob, iv, ov, kv, PEG, s, etc<br><br>Audio encoding and decoding standards: ma, MP3, AAC (. wma, MP3, m4a) Photo encoding and decoding standard: supports: peg, BMP, PNG FAT32/NTFS support easy automatic installation, automatic channel tuning and manual step channel tuning possibility of sorting the programmes manually MKV/DivX/MOV/MPEG/MP3/WMA/JPEG support for internal and external DivX/MKV subtitles automatic photo slideshow with ition effects possibility of creating Photo and Music playlists parent lock firmware update via USB port Interface HD MI USB port (USB 2.0) antenna input/output (not including lan port) Chipset: GX6702H5 HD DVB-T2 H.265/HEVC receiver/recorder with H.265/HEVC support metal case(support wifi function) Dol by Digital Plus, EAC3 support MKV/DivX with subtitles recording on USB flash drive: a possibility of immediate recording or schedule recording using EPG standby mode power consumption less than 1W Colour:Black Material:Plastic<br><br>Package Contents: 1 x Tuner 1 x remote control(Without 2 x AAA batteries)<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Functions: 1. Convert 0-100% PWM digital signal into analog signal. 2. The input digital signal can be a 0-100% PWM signal of 5V or 24V level, 3. The output analog signal can be 0-10V voltage. 4. P-10V: Input 0-100% PWM signal of 5V or 24V level, and output 0-10V voltage 5. Widely used in signal interface switching of PLC, microcontroller or other industrial control boards. parameter: 1. PWM signal receiving frequency range: 100HZ-3KHZ. 1KHZ-3KHZ is recommended. 2. PWM signal input level range: When the peak-to-peak value is 4.5V to 10V, the jumper pin is inserted at 5V. This type of level signal is mainly aimed at the interface of conventional industrial control cards (such as MACH3 boards) and 5V CPUs.<br><br>When the peak-to-peak voltage is 12 to 24V, the jumper pin is inserted at 24V. This type of level signal is mainly aimed at conventional PLC interfaces 3. Analog voltage output parameters, the following is explained by outputting 0-10V voltage After power on, when there is no input signal, the output is 0V, and there is output only when there is input. If it is required to power on for the first time, it is best to do a calibration and debugging: find a signal with a 50% duty cycle and connect it to DIN- and DIN+, and the amplitude corresponds to the corresponding jumper pin. The frequency is recommended to be 1KHZ-3KHZ. Use a multimeter to measure the AO and GND ports. At this time, the meter displays around 5.4V. Adjust the potentiometer on the board so that the multimeter displays 5.4v. This will calibrate your pulse signal and Correspondence of this module. The resolution of this module is 0.1V. Output current capability 10MA. If the relationship between the percentage of duty cycle and the voltage is opposite, you can check (or cross-check) the checkbox of the corresponding pin of STEP LOW and ACTIVE in the MACH3 softwareto set the PWM output pin. Color: green Material: PCB+plastic+metal<br><br>Package Con
Fruugo United Kingdom
High-Precision Measurement: The Digital Dissolved Oxygen Meter DO9100 provides accurate readings for dissolved oxygen levels, making it an essential tool for both seawater and freshwater environments. Versatile Application: Ideal for use in fish tanks and aquaculture settings, the DO9100 Dissolved Oxygen Analyzer ensures optimal conditions for aquatic life by monitoring oxygen levels effectively. User-Friendly Design: With its intuitive interface, the Digital Dissolved Oxygen Meter DO9100 allows for easy operation, enabling users to obtain quick and reliable measurements without any hassle. Durable and Reliable: Built to withstand the demands of aquaculture, this Dissolved Oxygen Analyzer is designed for longevity, ensuring consistent performance whether used in freshwater or seawater applications. Essential for Healthy Ecosystems: Regular use of the Digital Dissolved Oxygen Meter DO9100 helps maintain healthy fish populations and aquatic ecosystems by providing real-time data on oxygen saturation levels.<br><br>Colour:black Material:Plastic + Metal note:Not including 3*LR44 batteries<br><br>Package Contents: 1 * dissolved oxygen meter 1 * electrode 6 * replaceable electrode tips<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Product parameters: Product Category: Gaming Dongle Main control frequency: Duad-core Cortex-A7 up to 1.0GHz Memory performance: DDRIII 256M Support external TF: expandable to 128G Game content: 64G(20000+),Games ,128G(30000+ Games) Support games arcade, mame, atari2600, atari5200, atari7800, atarilynx, cps1, cps2, cps3, fbneo, gamegear, gb, gba, gbc, genesis, megadrive, nes, nesh, ngpc. pcengine, psx, sfc, snes 23 kinds of emulators Use interface: HDMI-compatible output, 1080P, 720P Voltage input: 5V/1A/2A Specifications: Features: - Original 3K rockerspecial game rocker for arcade, high sensitivity andantiskid design. - 2.4G wireless controller gamepad .Support up to 10 kinds of classic simulators to play classic nostalgic games. - The upgraded version of H D is more smooth and ready to play. - Support wireless handle and wired handle, a drag two handlesupport four people online to play. Package Included: 1 * Game stick. 1 * HDMI-compatible cable. 1 * USB charging cable, a 2 * Wireless gamepad. 1 * Receiver. 1 * TF card (32G,64G,128G optional) 1 * Manual
Fruugo United Kingdom
5000mAh power bank bike front light with multi-connector cable Lighting mode: high light, low light, breathing flash, double flash IPX6 waterproof and splashproofnbsp Not only is the bike light also a charging treasure, but can also charge your cell phone Specifications: Shell material: PC Product size: about 92 x 62 x 14mm Product volume: about 124g Battery capacity: 5000mAh ternary lithium cell Input and output: 5V2A Interface: Type-C/iP/Micro USBnbsp Lighting mode: high light/low light/breathing flash/double flash Luminous flux: 150lm, 80lm Duration: 12h/48h/72h/200h
Fruugo United Kingdom