How To Use SBB: 1) Before running SBB key programmer, please insert the blank new key into your car keyhole; 2) Turn on ignition switch; 3) Insert SBB 16-pin interface into your car OBD2 diagnostic seat. 4) Follow the instructions showed on the SBB screen. SBB V48.99 support cars till 2018.12!! SBB V48.99 supports: English, Italiano, Deutsch, Francais, Espaniol, Portugues, Turkish, Greek, Russian. SBB key programmer copies chip according to car model, and it programs key not clones key, you only needs to insert SBB 16-pin interface into your car OBD2 diagnostic seat, then read out immobilizer pin code from immobilizer dump/EEPROM of the car before writing it into new blank key.When programming For F000ord vehicle, it does not need pin code. SBB is Silca's new generation of portable chip matching equipment, which is used to match the chip key to the chip controller on the vehicle middle. Due to the built-in multiple car model cards, SBB can perform multiple functions with only the OBDⅡ data cable new key match Read the key information from the chip controller Remove lost keys from chip controller SBB has built-in matching steps, and will prompt step by step when matching Program the new remote SBB has matching software for the world's major automotive chips The advantage of SBB is that the models listed on the menu can be used in a real and reliable way PIN Code Service For HYU-N-DAI pincode For KI-A pincode For NISAN bcm code For VAG pincode For VAG 7-4 pincode Material: plastic colour: blue Package Contents: 1 x SBB key programmer Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Model:K24 Media:methanol diesel fuel kerosene chemical liquid urea water Importers:1 inch internal thread Measurement accuracy:± 1% Repeatability:± 0.5% Maximum working pressure:5BAR Operating voltage:2.3-3.3V Single count:0.00-9999.9 The total cumulative number:0.00-999999.9 Unit:L / L, gal / GAL, pint / PTS, quart / QTS Single measurement cleared:RESET Setting units of measurement: In the standby mode, or raise the amount of current display state Press CAL + RESET button for 5 seconds Enter unit conversion settings, press the RESET button Followed by LTR → GAL → PT → QT → LTR choose the unit of measurement While the cumulative filling volume displayed in the current unit of measure conversion after Press the MENU key for 3 seconds to exit the unit conversion settings. Note: 1. This product requires 2 AAA batteries, more convenient for you to use.(Not included batteries) 2. Low Battery Tips, When the battery voltage is 2.2V to 2.4V, display LBat, to remind the user to replace the battery. Flow range:C:0.1-7L/Min Colour:Blue & Black Material:PPS+Stainless steel Package Contents: 1 * Flow Meter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Intelligent data display: 1 inch flowmeter can display instantaneous flow and cumulative flow with intelligent counter, the reading display is and intuitive clear. More unit : flow meter default is gallon unit, optional measurement units: L, Gal, , , standby up to one year. High precision measurement: with high precision counter, measurement accuracy 1%, high reliability, good repeatability, maximum working pressure: 6RAR, cumulative technical range: 999999. Wide range of application: turbine flowmeter can be used to measure water, gasoline, , , methanol and other low , non-viscous liquids. Warm tip: Please check the battery electrode of the flowmeter once a year, so as not to affect the battery leakage resulting in water flowmeter damage. Colour:As Shown Material:Metal Size:105 x 66mm Package Contents: 1 x Flow Meter Only the above package content, other are not included. Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
1.HELPS CONSERVE WATER-The smart water meter for garden hose measures the water usage and flow rate, helps you to use water accurately and save money. You can use our garden digital water meter to measure how many gallons of water needed to and fill an RV tank or a small swimming pool. 2.SENSITIVE & ACCURATE-The smart water flow meter has a built-in Hall sensor, which is sensitive and , accurate to 1/10th gallon, Measurement Tolerance Less than 5%, Max Totalizer: 9,999.9 GAL. Tips: Please let the water flow fully through the digital flowmeter to more accurate.This garden hose water meter is very useful for your beloved garden.Also worked perfectly to measure the capacities of water, grey and black water tanks on your RV. 3.4 MEASUREMENT MODES-The hose water meter for RV monitors not only the current singular watering volume and accumulative total water consumption, but also the daily average water consumption for the last and the real-time water flow rate, allowing you to know the water flow in time, avoid guesswork, and prevent over-watering. 4.SIMPLE&FAST CONNECTION-The smart flow meter comes with hose quick connectors, can be easily connected to any stantard 3/4inch garden hose, faucet, sprinkler and nozzle. Please note that follow the water flow direction to install the hose water meter.USER FRIENDLY-The LCD screen of this garden water meter is easy to read, displays water usgage in gallons or liters. Just one button to set and reset to zero. And after 1 minute of inactivity, it will not display in standby to extend battery life. 5.RV Water Meter NOTE-The hose end water flow meter has been pre-assembled in the correct order, please don' disassemble all the fittings of water hose flow meter. And before use, please tighten and lock the hose quick connector firmly to prevent the connector from leaking. low Mode - Real-time Water Flow Rate Consumption Mode-Water Consumption Of Current Watering Mode-daily Average Water Consumption For The Last Total Mode-total Water Consumption Press the button briefly to switch to display mode Hold the button pressed in FLOW MODE for 2 se c to switch GAL or L. Hold the button pressed for 2 sec to reset to zero. Automatic standby without display after 1 minute of no operation. Waterproof: IPX6 Water Flow Rate: 1~ 40 L/ min (0.3~ 10.6 GPM) Consumption: 9, 999.9 L or 9,999.9 Gal Working Pressure: 0.5 bar~ 8 bar(7.25~116PSI) Flow Max: 2400 L/H(10.6GPM) Measurement Tolerance: + 5% The actual product may have slight color difference or difference, which will not affect the use Colour:Photo Color Material:plastic Package Contents: 1x Water Flow Meter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
John A. Davis now an independent contractor and senior integration architect at MEJEER LLC became a VMware Certified Instructor (VCI) and VMware Certified Professional (VCP) in 2004. Since then all of his work has focused on Vmwarebased technologies. He has experience in teaching official VMware curriculum in five countries and delivering VMware professional services throughout the United States. Recently his work has involved designing and implementing solutions for hybrid clouds cloud automation disaster recovery and virtual desktop infrastructure (VDI). He has authored several white papers and co-authored VCP-DCV for vSphere 7. x Cert Guide VCP6-DCV Cert Guide and VCAP5-DCA Cert Guide (VMware Press). He holds several advanced certifications including VCAP-DCV 2021 VCP-NV 202 and VCP-DTM 2020. He has been a vExpert since 2014. He is the author of the vLoreBlog. com and can be found on Twitter @johnnyadavis. Steve Baca VCAP VCI VCP and NCDA has been in the computer industry for more than 20 years. Originally a computer programmer and a system administrator working on Unix and Windows systems he migrated over to technical training and wrote a course for Sun Microsystems. After teaching various courses for Sun he eventually transitioned to VMware about 10 years ago to do technical training. Currently he is a badged employee for VMware and lives in Omaha Nebraska. He thoroughly enjoys teaching and writing and believes that the constant evolution of the computer industry requires continuously learning to stay ahead. Steve can be found on Twitter @scbaca1. . Language: English
Fruugo United Kingdom
[Upgrade] Low cost and high stability, it can replace the basic program of STM32F103C6T6 chip. (If your program flash is less than 32K, RAM is less than 10K, and Timer 4 and Serial 3 are not used, you can use it instead) ST-Link V2 Programmer: supports a full range of STM32 SWD debugging interfaces, simple 4-wire interface (including power supply), fast and stable; interface definition shell directly marked 40pin STM32F103C6T6 minimum system board: Micro-USB connector, which can power the board and communicate with USB. Added 5V power output, and the output I/O port is protected, for fear of operation errors caused by damage to ST-LINK V2 Colour:Random Color, don't accept the specified color Material:Plastic + Metal Package Contents: 1 x STM32F103C6T6 development board (unwelded pin header) 1 x ST-Link V2 downloader (random color, don't accept the specified color) 1 x DuPont line (random color, don't accept the specified color) Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
This MSP LSD-FET430UIF is a powerful flash emulation tool to get started with application development quickly on the MSP430 MCU. It includes USB debugging interface used to program & debug the MSP430 in-system via the JTAG interface or the pin saving Spy Bi-Wire (2-wire JTAG) protocol. The flash memory can be easily erased and reprogrammed in seconds with only a few keystrokes. The MSP430 flash is ultra-low power, so no external power supply is required. This debugging tool interfaces the MSP430 to the included integrated software environment and includes code to start your design immediately. The MSP LSD-FET430UIF development tools supports development with all MSP430 flash devices. The USB Debugging Interface is compatible with IAR Version 3.21 or higher. Via USB debugging interface (MSP-FET430UIF), a flash-based MSP430 MCU can be connected to a PC for real-time, in-system programming and debugging Operating system: it can support Windows XP, Windows Vista, Windows 7 (32 & 64-bit) Technical Specifications: Software configurable supply voltage: between 1.8 and 3.6 volts at 100mA Supports JTAG Security Fuse blow to protect code Supports all MSP430 boards with JTAG header Supports both JTAG and Spy-Bi-Wire (2-wire JTAG) debug protocols Material: plastic colour: As shown Package Contents: 1 x MSP 430 debugger 1 x USB cable 1 x 14-pin Flat cable 1 x CD Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Intelligent data display: 1 inch flowmeter can display instantaneous flow and cumulative flow with intelligent counter, the reading display is accurate and intuitive clear. More unit selection: flow meter default is gallon unit, optional measurement units: L, Gal, PTS, QTS, standby up to one year. High precision measurement: with high precision counter, measurement accuracy ±1%, high reliability, good repeatability, maximum working pressure: 6RAR, cumulative technical range: 999999. Wide range of application: turbine flowmeter can be used to measure water, gasoline, diesel, kerosene, methanol and other low corrosive, non-viscous liquids. Warm tip: Please check the battery electrode of the flowmeter once a year, so as not to affect the battery leakage resulting in water flowmeter damage. Colour:As Shown Material:Metal Size:105 x 66mm Package Contents: 1 x Flow Meter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom