Before shooting, please check the motherboard manual to confirm that your motherboard supports TPM2.0 technology. You can check or consult on the motherboard's official website.Some motherboards need to plug in the TPM module or update to the latest BIOS to enable the TPM option.Please cancel other computer security technologies before installation.Must-see requirements before placing an order:Please make sure your motherboard supports TPM 2.0 modulePlease try and provide the motherboard model (the middle part of the motherboard is usually above the graphics card slot) and photo socket. There is no fixed specification for this interface, and there are many varieties.You can check your compatibility and incompatibility with this motherboard moduleThe first step: first confirm your own motherboard manufacturer, divided into Intel and AMD.If it is Intel, please check the number after the English letter. Any number greater than 99 (including 99) is fine, for example: ASUS X99, 99 after x is fine.If it is AMD, make sure that the memory type of the motherboard must be DDR4. For example: MSI 970A-G43, the memory type of this model is DDR3, which is not supported!The second step is to confirm the pins of your motherboard, whether it is 12pin, 14pin or 20pin, etc.Example: My motherboard model is ASUS B450-M, is it appropriate?Make sure that the motherboard manufacturer is AMD, and tarief makes the motherboard memory type DDR4, which is compatible.Specification: 20pinpacking list1 * module
Fruugo United Kingdom
100% Brand new and high quality Made of high quality material, more durable. Low noise, reliable use DC 5V 4-phase stepper motor + for Arduino driver test module board A, B, C, D four-phase LEDs indicate the working state of the stepper motor Stepper motor with standard interface for direct insertion Rated voltage: DC5V 4 phase Step angle: 5.625 x 1/64 No load absorption frequency: Greater than 600Hz No-load extraction frequency: Greater than 1000Hz Pulling torque: Greater than 34.3mN.m (120Hz) stop torque: Greater than 34.3MN.m DC resistance: 200Ohm±7% (25C) Insulation resistance: Greater than 10Mohm (500V) Dielectric strength: 600V AC / 1mA / 1s Edge rating: A Temperature rise: Less than 40K (120Hz) Noise: Less than 40dB (120Hz, no load, 10cm) Colour:As shown Material:Plastic + Metal Package Contents: 5 x 28BYJ-48 stepper motor 5 x ULN2003 motor driver board(Due to different batches, the appearance may be different, but the function is the same) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Board game name: Uno Version: Giant Alphanumeric Patterns: Mattel games Language: English Game type: Family Game components: Cards Suitable for adults: Yes Recommended minimum age: 7 years Minimum number of players - maximum number of players: 2 - 10 This is a card game: Yes Recommended age: 8 to 13 years Elementary material: cardboard Cardboard This is the card game you already know, now three times bigger and ideal for the beach or pool Players still compete for the chance to get rid of all their cards by combining their hand with the top card in the discard pile. When you're down to one card, don't forget to shout UNO
Fruugo United Kingdom
Brand new and high quality, Brand new for Asus motherboard Antenna, 2.4G/5G/6G WiFi6e antenna, tri-band extension cable antenna with magnetic attraction. Double RP-SMA Connector, Cable length 80cm, Support various PCI-E wireless cards. For Asus ROG B560/B660, H610/H670, M13H/M12/M11, Z690/Z490/X570 and other motherboard wireless cards dedicated dual-band antenna, 2T2R multi-band antenna. For Asus, for ASRock, for Biostar, for Colorful and other motherboards with WIFI version, as long as they have 2 SMA inner pin ports, they can be adapted to use. Support AX200/AX201/AX210/AX211/3165/3168/3160AC/7260/7265/8260/8265/9260/9560/9462AC, wireless modules. Connector:RP-SMA Male Colour:Black Material:Plastic Size:Cable Length:80cm Package Contents: 1 * WiFi 6e Anten Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
1. The display device is a 4-digit common positive red digital tube. 2. The 8-level gray scale of the digital tube is adjustable. 3. The control interface level can be 5V or 3.3V. 4. Four M2 screw positioning holes for easy installation. 5. Control interface: 4 pins in total (GND, VCC, DIO, CLK), GND is ground VCC is the power supply, DIO is the data input and output pin, and CLK is the clock signal pin. Digital tube: 4-digit 0.36-inch digital tube with common anode and score points, with red letters highlighted. Positioning holes: 4 M2 screw positioning holes with a diameter of 2.2MM, making the module easy to install and position. bit to achieve combination between modules. size: 4.2 x 2.4x 1.2cm Material: plastic colour: Blue Package Contents: 1 x module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
1.Support single-user multi-user, support multi-display mode 2.Support desktop, server, industrial computer display 3.Support for dragging, and compatibility is very good 4.Support all motherboards with PCI plug, support drag machine, 5.The product does not need to install the driver, the system recognizes . Memory capacity: 8MB Memory bandwidth: 32Bit Memory type: SDRAM Interface type: PCI Output port: VGA Material:plastic colour:green Package Contents: 1 x Image Card Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
for Arduino: Click "File" in the upper left corner → Preferences → Additional Development → Board Manager URL → Enter the URL in the input box. (ESP32S3 is a chip, and the SDK version needs to be version 2.0.3 or above) https: //raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json Click OK and the software will be installed by itself. After installation, restart for the Arduino IDE software. Search for ESP32 in Tools→Board Manager and install for ESP32-Arduino SDK Copy all files in the lib folder for to /Arduino/libraries Select the settings as shown. Note that the FLASH size partition and size may be modified depending on T-embed color: B-Fully transparent button, shell size: 9.6 x 3.9 x 1.1cm Material: plastic colour: As shown Package Contents: 1 x T-Embed 1 x IDC3 Simple Horn Seat 2.54 8pin 1 x Pin Header 5 Pin 1 x Battery Cable 1 x Flex Cable 2.54 8pin 10cm 1 x Flex Cable 6pin Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
[Adjustable RGB GPU Support bracket]The RGB GPU bracket support has a sliding support structure to match various CPU and PC cases. Effectively eliminates sagging pressure on graphics cards. [Sturdy Metal Body anti sag bracket gpu holder]The RGB GPU brace using sturdy iron as the main structure, it can better support the graphics card. gpu support bracket for 4060,4080,4090,5700,6700. [5V ARGB SyncGraphic card Support]This gpu holder is equipped with addressable ARGB LED lights argb strip to make your computer case colorful and bring you the ultimate visual experience. [Easy Installation ARGB gpu sag bracket] The rgb gpu sag bracket compatible with a variety of motherboards and cases, provides two-way sliding adjustment for different lengths of graphics cards and support positions to adjust to the right position. NOTE:Installing this graphics card holder requires three PCI slots. Please check if your chassis has enough space for installation. Colour:White Material:Metal+ABS Package Contents: 1 x Graphics Card GPU Holder Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom