The Neomounts by Newstar desk grommet mount, model FPMA D9GROMMET is the right solution to mount a monitor arm on a desk using the available cable hole on desks. This product includes the grommet and installation material. This mount must be purchased separately from the desk mount arm. An innovative cable management conceals and routes cables through the cable holes of the grommet. Hide your cables to keep the workplace nice and tidy. This model is suitable for the following Neomounts by Newstar desk mounts: FPMA D910, FPMA D920, FPMA D930, FPMA D930D, FPMA D930D3, FPMA D930D4, FPMA D930D 5, FPMA D930D6, FPMA D1010, FPMA D1020, FPMA D1030, FPMA D1030D, FPMA D1030D3, FPMA D1110, FPMA D1120, FPMA D1130 All installation material is included with the product.
AV Parts Master
RA Studfix V2 NM (Nursery School Model with lower screen height positions) A complete Floor to Wall Mounting System suitable for Flat Screens with a maximum recommended weight of 80kg and maximum VESA configuration of 800x600. Designed for use in Nursery and Primary School environments where a lower screen position is required. This Nursery Model allows the bottom of an average sized 65 inch screen to be positioned approximately 25cm from Floor Level. A complete installation solution designed to enable Flat Screens or Touch Screens to be fixed to a wooden stud partition wall or solid wall and direct the weight of the screen directly to the floor. Ideal for installations when the wall itself cannot support the weight of a heavy screen. Suitable for Smart, Clevertouch, Ctouch, Promethean ATP, Philips, Samsung, LG, Panasonic, BENQ, iTouch, Vividtouch, Hitachi, Iiyama, iBoard, Genee Screens and many more................ The system includes two upright supporting box section legs which are fixed to the existing upright wooden studs inside the wall with a Wall Mounting Plate and Floor Plate included in the kit. This creates a rigid, safe and strong fixed mounting frame for the Flat Screen Mount (included) to fix onto and position the screen at a selection of height settings. All fixings, bolts, coach screws and plastic caps are included for a very neat and tidy installation. The two Upright Supporting Legs are hollow box section design and allow all connection cables to and from the screen to be routed through them. Cable exit entry slots are positioned on the inner sides of each leg to enable surface mounted cable trunking to route cables away to a connection panel if required (not included). Maximum CENTRE POINT of screen from floor level is approximately 1060mm. Minimum CENTRE POINT of screen from floor level is approximately 760mm. The Wall Mounting Plate can be fixed to the wall in a LOWER or HIGHER position to avoid any dado rails or network trunking on the walls surface. In the LOWEST position the centre of the plate will be 650mm from floor level and in the HIGHEST position the plate will be 980mm from floor level. The Wall Mounting Plate itself is 120mm high and has four mounting slots 400mm apart. Upright supporting legs are 500mm apart (centre to centre). Finished in durable White or Black powder coat finish. An Optional Extra Media Shelf is available for this system (RA Studfix Shelf) which can be positioned under the screen at a selection of height settings.
AV Parts Master
ConferenceSHOT AV Bundle CeilingMIC 2 (without speaker) Cost effective USB 3.0 conferencing for small to medium conference spaces. Use the ConferenceSHOT AV camera and two CeilingMIC microphones with your existing audio solution. Available in silver black or white. Key Features: HD PTZ Camera with 10x zoom, 74 HFOV Two CeilingMIC microphones with 360 coverage and echo cancellation Administration and control via web interface Simplify installations by viewing all your Vaddio products across a deployment on one screen with the simple click of a button. The Vaddio Deployment Tool enables you to select devices from the network, choose an action like rebooting the device, unmute the audio, or updating firmware and voil ! remote troubleshooting success. You can even conduct mass firmware updates on hundreds of devices all at once, which saves you a lot of time. Key Features USB Collaboration ideal for small to medium sized videoconferencing rooms. The ConferenceSHOT AV CeilingMIC 2 Bundle (without speaker) includes one ConferenceSHOT AV Camera and two CeilingMIC microphones, for easy integration into existing in room third party speaker systems. Powerful ConferenceSHOT AV integrates a 10X zoom PTZ camera and audio conferencing mixer into a single USB 3.0 device, so you can easily connect a microphone and external speaker to the camera. The CeilingMIC 2 Bundle (without speaker) is easy to install and allows simple plug and play functionality with all major UCC soft clients such as Skype for Business, WebEx and Google. Simple ConferenceSHOT AV is UVC compliant. No external drivers need to be installed on your PC just plug and play. The versatile system supports customized AV designs with third party equipment or can be deployed as a standalone solution. Enterprise Class ConferenceSHOT AV allows for remote monitoring, management and control of a distributed camera network. IP accessible and a browser based user interface enables both browser control and IP live preview and setup from PCs, Macs and mobile devices including iPhone, iPad and Android devices. ConferenceSHOT AV turns your BYOD device into a small space UC system with professional PTZ camera quality and full room audio performance. It s a significant step up in performance from the current webcam based technology offerings. This Package Includes: ConferenceSHOT AV camera (silver black or white) 2 qty CeilingMIC microphones (white) 2 qty silicone split strain relief boots (white) ConferenceSHOT AV Quick Start Guide CeilingMIC Installation Guide PoE Midspan Power Injector with AC cord set(s) Thin Profile Wall Mount (black or white) with mounting hardware and installation manual Vaddio IR Remote Commander with audio controls 2 qty CeilingMIC interface boxes 2 qty cable clamp grommets 4 qty ceiling trim ring plates (white) with mounting screws 2 qty ceiling tile braces 6' (1.8m) USB 3.0 cable, type A to B 2 qty 3' (0.9m) cat 5 cables, white 1 qty 10' (3m) cat 5 cable, black 1 qty 4 position phoenix style connector
AV Parts Master
Redesigned from the ground up, the CS 1900 ceiling speakers are loaded with quality components resulting in clean, powerful sound. They use the ceiling void as an infinite baffle allowing un restricted driver excursion all of which adds up more bass. Low impedance speakers like these offer better sound that 100 70v line speakers. Perfect for meeting spaces. Front EQ The simple attenuation switch on the front allows the user to fine tune the EQ for the environment. Titanium Dome The large tweeter is made from premium material and pivots to help installers setup the soundscape. Titanium ensures long, stable performance and reduces distortion. Woven Kevlar Kevlar gives smooth audio with incredible detail and transparency. The cone is held in place with a butyl rubber surround to extend the life of the loudspeaker. Magnetic Grill The grill clips into place magnetically once the speakers are secured. Invisible The grill extends all the way to the edge of the speaker resulting in virtually no visible edge. This ultra thin grille allows the technology to visually disappear. Simple to fit A cutout template is included so the installer can easily trace the cut line in the ceiling tile. Cut a 210 mm (8.3 ) hole and turn the dog leg screws from below to fix the speaker; it s quick and easy. Shallow Only 87 mm (3.4 ) deep, the CS 1900 can be placed anywhere around the room to optimally disperse the sound. They fit in any environment which has a false ceiling. Crossover Gold plated terminals and a quality crossover circuit is included which splits the work between the woofer and tweeter. High Sensitivity Ceiling speakers often lack the power of wall speakers, but these have a higher sensitivity of 90dB to cut through high noise presentation environments. Thick Ceiling? The clamps are an extra long 35 mm (1.4 ) to cope with ceilings made of very thick material. Most ceiling speakers can only cope with tiles up to 15 mm (0.6 ) thick.
AV Parts Master
This Neomounts CPU mount, model CPU D025BLACK, allows you to mount a computer under a desk. A CPU mount creates a need and clean desk because its stored under the desk and doesn't use any valuable desk space. Increase the lifetime of your CPU due to reduction intake dust and dirt from floors. Keep the workplace clean without computers on the floor. Neomounts CPU mounts allow horizontal and vertical installation of computers. Hide your cables and keep the workplace nice and tidy. Easy to adjust in width and depth to fit most desktop and tower PCs. The specifications listed show maximum and minimum width and depth of the mount. All installation material is included with the product.
AV Parts Master
The Neomounts thin client mount, model THINCLIENT 05, allows you to mount a thin client computer to a monitor mount. A thin client mount creates a need and clean desk because its stored behind the monitor and doesn't use any valuable desk space. Increase the lifetime of your computer due to reduction intake dust and dirt. Keep the workplace clean without computers on the desk. This Neomounts thin client mount allows vertical installation of thin client computer between the screen and monitor mount. This product includes VESA 75 and VESA 100 hole pattern to simplify installation with flat screens and flat screen mounts. Hide your cables and keep the workplace nice and tidy. Easy to adjust in width and depth to fit most thin client PCs. The specifications listed show maximum and minimum width and depth of the mount. All installation material is included with the product.
AV Parts Master
SL Handheld Set DW 3 UK Rackmount SetThe SL Handheld Set includes the handheld transmitter, stationary receiver and everything to use or install.It comes with the MME 865 condensor capsule so not just a capsule, but the best capsule for speech. All sets also come with rechargeable accupacks with up to 15 hrs of operating time. The accupack is also USB rechargeable, the cable is in the box, the USB socket is presumably just a step away from you. The two types of sets are either Rackmount Sets ( R version), which come with everything needed for rack mounting, or Case Sets ( C version), in a transport case without rackmounts, if you do not want to install the receiver. Features Automatic frequency and interference management Speech optimized condenser microphone capsule Clear and easy focused user interface Long operation time (up to 15 hours) Advanced power management and Li Ion rechargeables Secure 256 bit AES encryption Remote controllable What 39;s in the box SL Handheld DW MME 865 capsule BA 10 rechargable battery GA 4 Rackmount Kit and Pouch
AV Parts Master
MSFT TEAMS ZONE WIRELESSMSFT Teams Certified headset designed to help you work from anywhere with exceptional sound, flip to mute mic and Qi wireless charging. ELEVATE ANY WORKSPACEControl your acoustic environment with Zone Wireless, the Bluetooth headset designed to help you communicate, collaborate, and concentrate in busy workspaces. Zone Wireless Plus can connect up to six Logitech Unifying wireless peripherals through a single receiver.GET FOCUSED. STAY FOCUSED.It can be hard to concentrate while working from home these days. With active noise cancellation that reduces unwanted ambient sound, a Zone Wireless headset can help you focus on the task at hand and get more stuff done. Think of it as a personal portal to acoustic serenity amidst a sea of otherwise distracting noise. Same workspace, but with a sound experience that you control.GREAT FOR MUSIC AND TALKINGTreat yourself to immersive sound when listening to music. Logitech audio engineers have been fine tuning headset audio for decades, and the results are amazingly clear when you experience your own music with Zone Wireless. For phone chats and conference calls, the noise canceling mic isolates your voice from the noise around you for clearer conversations and a sidetone control helps you modulate the volume of your voice to just the right level. CERTIFIED FOR MICROSOFT TEAMSLaunch a Microsoft Teams meeting and pick up or answer a Teams call with a single touch. Or apply a longer touch to invoke Cortana voice skills. It s that simple. Zone Wireless is Certified for Teams to ensure a seamless audio experience when using Teams to chat, meet, call or video conference. The Teams version of Zone Wireless also fully supports Skype for Business. Get the right equipment to work effectively in open offices, at home or from anywhere.SIMPLE CONTROLS. EASY TO USE.Zone Wireless provides an intuitive and simple interface to adjust volume, play pause music, and start end calls. The mic boom features a flip to mute function, plus button controls provide easy access to power, active noise cancellation, and wireless Bluetooth pairing. Zone Wireless supports wireless Qi charging and includes a mobile companion app that supports easy setup and simple control for headset functions like sidetone modulation and EQ presets.ALL DAY COMFORTZone Wireless is designed for use all day, every day. The silicone padded headband is lightweight and provides just the right clamping force for a fit that s so comfortable you might forget you re wearing a high performance headset. Soft leatherette ear pads are cushiony and breathable, so your ears don t get hot. Zone Wireless blocks sound from the moment you put it on, and the foldable design makes it handy to stow when you take the headset off.CONNECT MULTIPLE DEVICESDesigned for mobile workers, Zone Wireless provides the versatility to wirelessly connect to your computer, tablet, and smartphone simultaneously and seamlessly switch between connected devices at will. The 30m wireless range provides freedom to roam while staying connected. Transition between phone chats, video conferencing, music, and general noise reduction throughout your day all with the same headset and happy making acoustic performance.ONE UNIFYING AUDIO RECEIVERUse Zone Wireless Plus headset with up to six other Logitech Unifying wireless products using the same USB receiver. This single receiver plugs into the USB A port on your computer and provides a reliable connection up to 10 m away from mice and keyboards, and up to 30 m away from the headset. With no need to ever unplug the receiver, it never gets misplaced or lost. No more choosing between your headset, mouse or other peripherals now you can use them all simultaneously.FULL CONTROL WITH LOGI TUNEOpen the Logi Tune mobile app on your smartphone or Tune Desktop on your computer to easily setup, control, and customize your Zone Wireless headset. From the elegantly intuitive dashboard, confidently manage mute, view charging status, modulate sidetone controls, and tweak the 5 band EQ sliders (or choose one of the custom presets). Keep your headset up to date by downloading the latest software from either the mobile or desktop app.READY FOR BUSINESSUniversally compatible to work with common calling applications across most all platforms and operating systems. Business certifications include Microsoft Teams and Skype for Business, certified for Google Meet and Voice , compatible with integrated mute controls for Zoom , and works with other popular applications like Cisco Jabber , BlueJeans, and GoToMeeting to ensure compatibility and seamless integration in the workplace. Specifications Product type Headset Microphone type Boom Recommended usage Office Call center Headset type Binaural Wearing style Head band Product colour Graphite Foldable Yes Cable length 1.3 m Control type Buttons Wireless charging Yes Operating keys Multi key,Volume ,Volume LED indicators Yes Technical details Quantity 1 Headset type Binaural Wearing style Head band Product colour Graphite Foldable Yes Design Product type Headset Microphone type Boom Headset type Binaural Wearing style Head band Product colour Graphite Foldable Yes Control type Buttons Ports interfaces Connectivity technology Wireless Wireless receiver interface USB Type A 3.5 mm connector No USB connectivity No Bluetooth Yes Wireless range 30 m Cable length 1.3 m Bluetooth version 5.0 Headphones Ear coupling Supraaural Headphone frequency 30 13000 Hz Microphone Microphone type Boom Microphone direction type Omnidirectional Folding microphone Yes Microphone frequency 85 20000 Hz Control unit Control type Buttons Battery Battery recharge time 2 h Battery life (max) 16 h Battery technology Lithium Ion (Li Ion) Battery operated Yes Wireless charging Yes Battery type Built in battery Indication LED indicators Yes Weight dimensions Weight 180.8 g Width 176.7 mm Height 174.7 mm Depth 70.7 mm Packaging content Wireless receiver interface USB Type A Receiver included Yes Audio adapters included USB Quantity 1 Cables included USB Type A to USB Type C Pouch Yes Packaging data Receiver included Yes Audio adapters included USB Quantity 1 Cables included USB Type A to USB Type C Other features Wireless receiver interface USB Type A Receiver included Yes Bluetooth version 5.0
AV Parts Master