The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: BlackCable type: RoundCable length: 70mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 70m, black All components used must support this feature.
AV Parts Master
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: WhiteCable type: RoundCable length: 30mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 30m, White All components used must support this feature.
AV Parts Master
Impera Echo Plus The Impera Echo Plus control pad is a compact, customizable, wall mounted AV control pad that includes LAN based control. It provides a simple and intuitive interface for presentation spaces, learning environments, and conference rooms, and can support a wide range of equipment. The Echo Plus can be quickly configured within Biamp Project Designer software, making it easy to change the system as the needs of the room change over time for a flexible and cost effective control solution. View more information here. Supports up to 8 software configurable buttons Includes on board controller; no external processor required Controls up to 2 third party devices over Ethernet 1 bidirectional RS 232 IR port for third party control with feedback 1 unidirectional RS 232 IR port for third party control 3 GPIO ports Mini USB connection for system configuration and maintenance Supports email notifications for lamp filter hours and warnings Expansion Bus supports up to 2 additional devices (keypads and port expanders) Easily add more ports with the Connect X MP6 Covered by Biamp Systems five year warranty
AV Parts Master
This Lindy 300m USB Cat.6 Extender extends the distance between a standard Human Interface Device and the computer up to distances of 300m. It is not suitable for keyboards or mice that require their own driver, however can be used with both standard and wireless USB mice and keyboards. This Extender is a two part hardware solution comprising a transmitter that connects directly to your computer and a receiver that connects to the USB HID device. Cat.5e or higher network patch cable (not included) is required to connect the two units together. For best performance and compatibility, we recommend the use of solid core patched cables. A power supply for the receiver unit ensures uninterrupted electricity supplies.
AV Parts Master
The Lindy Cat.6 USB Extender can be used to extend the distance between a USB device and a host computer by up to 60m. It consists of a local unit, which can be connected to the computer or laptop and a remote unit which connects to USB devices like mice or keyboards, perfect for long distance access. Standard, low cost Cat.5e 6 cable (not included) is used to connect the two units together. For best performance and compatibility, we recommend the use of solid core patched cables.
AV Parts Master
Distinguished by its modern design aesthetic, the Apprimo TEC X family of AV control pads provide simple, intuitive interfaces for presentation spaces and conference rooms via highly intuitive capacitive touch capabilities, delivered at the price of a keypad controller. Equipped with an LCD and rotary knob, the TEC X 1000 is PoE powered (IEEE 802.3at Class 3, 15W), wall mountable, and daisy chainable, which greatly reduces cabling requirements and installation time. In addition, the TEC X 1000 supports all TTP commands and can be quickly programmed and customized within Tesira software as the needs of the room change over time, making TEC X a very flexible and cost effective control solution.
AV Parts Master
Versatile Control and Resource ManagementA professional and convenient solution for in meeting controls at the desktopor intuitive room booking and scheduling outside of the room. Built for Convenienceand Ease of UseDTEN Mate is designed to offer an intuitive solution for control, scheduling and management of Zoom Rooms and Microsoft Teams Rooms meetings. An Enhanced Meeting Experience at Your FingertipsThe DTEN Mate is a highly secure, reliable and intuitive solution for Zoom Rooms and Microsoft Teams Rooms.With a single tap of the screen, users can launch meetings, admit participants, browse meeting schedules, adjust camera and microphone settings, and so much more.Flexible and Secure Mounting Options IncludedWith the included DTEN Mate Dock, the DTEN Mate can be easily mounted to walls, door frames or table top.Tamper resistant locking security bezel included for use in shared multipurpose spaces. Available Wireless (Wi Fi)or Wired (PoE)Choose the DTEN Mate that 39;s best for your hybrid office:as a secure wired PoE solution or versatile wireless controller Wireless DTEN Mate (Wi Fi)The DTEN Mate (Wi Fi) connects to the Zoom Room wirelessly and can be lifted from the DTEN Mate Dock for use as Zoom Rooms Controller (ZRC) or Zoom Rooms Scheduler (ZRS).
AV Parts Master
49 Fanless High Brightness DisplayModel DS491LT4 The DS491LT4 is a full HD 49 inch high brightness LCD featuring an LED backlight producing a 3500 nits sunlight viewable image. The DS491LT4 has been designed for applications in bright environments such as outdoor enclosures and storefront windows. A narrow bezel makes this model ideal for either single display or video wall applications. Each screen is individually color calibrated to the D65 color standard to ensure uniformity among multiple displays. The DS491LT4 features an integrated Android based media player with wireless connectivity offering users a complete media platform, allowing playback of local files and USB SD card media. SUNLIGHT VIEWABLE IMAGE FANLESS THERMAL MANAGEMENT BUILT IN MEDIA PLAYER TRUECOLOR CALIBRATED 24 7 OPERATION Product HighlightsSunlight readable 3500 nits brightness, Fanless thermal management, Integrated Android media player, Narrow 8.5 mm bezel for video wall applications, 1080p Full HD resolution. Auto Brightness ControlDifferent external lighting conditions require different brightness levels. An onboard light sensor measures the ambient light in the area and automatically adjusts the image accordingly. TrueColor CalibratedEach screen is individually color calibrated to the D65 (6500K) CIE color standard. Not only does this produce a true, natural white, but also accurately reproduces brand colors, skin tones, and colorways. Built In Media PlayerAn integrated Android based media player with WiFi offers users the freedom to select from the array of various media software solutions on the market or use the bundled DynaScan DSM365 application for local video playback, playlist creation, and content scheduling. Sunlight ViewableWith a brightness of 3,500 nits, the DS491LT4 can easily be viewed in direct sunlight applications such as storefront windows. Narrow Bezel for Video WallsThe DS491LT4 features an 8.5 mm narrow bezel display perfect for video wall applications. With built in video daisy chaining, a single 1080p source can be used on video walls up to 15 15 in size without the need for any additional external video wall controller.
AV Parts Master