1、[Fast and Accurate] The print head prints fast, accurate and smoothly, without crystallization, no clogging. 2、[Excellent Printing Effect] This print head provides clear printing, with bright colors and high degree of reproduction, no color difference. 3、[Great Replacement] The print head has stable performance and high reliability, perfect for replacing your damaged original print heads. 4、[Applicable Models] This print head is applicable for L801 L800 L805 TX650 T50 L850 printers, which can perfectly compatible with. 5、[Industrial Material] Made of industrial material, with strong corrosion resistance and long lasting color preservation, sturdy and not easy to damage.
Fruugo United Kingdom
The printhead is suitable for HID Fargo DTC4500 FD/MG ID Card Printer KPE-57-12GBH4-FAR. Compatible with: Suitable for HID Fargo DTC4500 FD/MG ID Card Printer. 1 x ID Card Printer Printhead. High-speed low-temperature clear printing, even at high-speed low-temperature printing settings, our printhead can maintain clear and accurate printouts, showing its excellent performance and adaptability.
eBay
[Compatible 3D Printers]: This 2pcs extruder hotend replacement kits are only for Anycubic Kobra S1/Kobra S1 Combo FDM 3d printers, not for other 3d printer models. Please confirm your 3d printer model before ordering. [High Quality 3D Printer Accessories]: Includes 1 packs assembled hotend kits parts: high precision nozzle, throat tube, heater block thermistor and heater cartridge for smoother printing and better 3D printed models. [Support High Speed Printing]: Semi-assembled hotend with all-metal throat design makes the print head heated evenly and the filament flows smoothly in the throat nozzle to support high speed printing. And produced by a rigorous design and testing team, no leakage and clogging, you can easily start your 3D printing experience. [Warm Note]: We kindly suggest you please check whether each part is tightened before use, because the assemble hotend kit will be loosened during transportation. Then after installing this hotend print head kit, we suggest you to re-level the heat bed. It is not recommended to replace the nozzle of this hotend. Please note: the physical slightly color difference or difference, does not affect the use, please do not mind, thank you! Colour: As Shown Material: Brass Package Contents: 2 x 3D Printer Hot End kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
47500 printhead is suitable for HID Fargo DTC4250e DTC4000 C50 DTC1250e DTC1000 1500. High-speed low-temperature clear printing, even at high-speed low-temperature printing settings, our printhead can maintain clear and accurate printouts, showing its excellent performance and adaptability.
eBay
Package: This kit contains 10 PCS 0.4mm Brass High Speed Nozzles for High Speed Printing. Smooth Inside: Smooth inner wall without burr, minor viscosity coefficient, smoother tapping. Cutting chamfer design, reducing resistance, smooth feeding, barely blocking. Compatible Models: These nozzles kit is compatible with for Anycubic Kobra 3, 3d printers. Better Compatibility and Applicability: Works with most FDM printing materials such as PLA, ABS, PETG, TPE, TPU, PC, etc. 10PCS Nozzles Kit: nozzles are made of high quality materials, which has better thermal conductivity and high hardness for better printing. Please note:the physical slightly color difference or difference, does not affect the use, please do not mind, thank you! Colour:As Shown Material:brass Package Contents: 10 * Printer Nozzles 0.4mm Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
47500 printhead is suitable for HID Fargo DTC4250e DTC4000 C50 DTC1250e DTC1000 1500. High-speed low-temperature clear printing, even at high-speed low-temperature printing settings, our printhead can maintain clear and accurate printouts, showing its excellent performance and adaptability.
eBay
With 1.5m desktop controller, small and convenient, easy to switch Panel with toggle button keys High-quality chip, stable signal, smooth switching With power cord (high power consumption equipment can be used) 4 USB ports for input and 4 USB ports for output, which can share multiple USB devices such as printers, mice, and keyboards. Colour:black Material:plastic Package Contents: 1 x USB Share Switch Adapter Set Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
47500 printhead is suitable for HID Fargo DTC4250e DTC4000 C50 DTC1250e DTC1000 1500. High-speed low-temperature clear printing, even at high-speed low-temperature printing settings, our printhead can maintain clear and accurate printouts, showing its excellent performance and adaptability.
eBay
Tutorial: Align the chip with the corresponding groove on the chip resetter so that the probes of the chip resetter correspond to the contacts on the ink cartridge's chip. Bring the two components together tightly. If the red light comes on, it indicates correct and good contact. After about 5 seconds, the red light will change to green, indicating that the ink cartridge chip record has been refreshed. Inject new dye ink into the ink cartridge or use other brands/compatible inks to make it usable. Usage precautions: When the ink shows 100%, do not always try to restore it, otherwise, it will lock the numbers. When the ink level displayed on the chip is below 15%, you must reset the chip with a chip resetter immediately, otherwise, the ink cartridge will display an error message. The red indicator light continues to blink and does not change to green: Reason one: The probes of the chip resetter are not aligned with the contacts on the chip, or the contacts are dirty. Reason two: If a non-genuine Epson ink cartridge is used, the chip may not make close contact with the probes. Product Name: Maintenance Chip Resetter Part NO.: C9345/C12C93459 Port: Type-C Suitable Printers: WF-7820/WF-7830/WF-7840/WF-7835/WF-7845/WF-7848 M15140/M15146/M15147/ST-C8000/ST-C8090 ET-5800/ET-5850/ET-5880/ET-16000/ET-16600/ET-16650 ET-16600/ET-8500/ET-8550/EC-C7000 L18050/L8050/L8168/L8180/L8188/L6550/L6570/L6580/L15150 L5150/L15158/L15160/L15168/L11160 Colour: As Shown Material: ABS Package Contents: 1 x Decoder Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
The Fargo 88933 Printer Cleaning Kit for HDP8500 includes 4 printhead cleaning swabs, 10 cleaning cards and 10 cleaning pads. Fargo 88933 Printer Cleaning Kit is a simple and cost efficient way to maintain your HDP8500 printer and extend its life.
eBay
[Best Upgrade]The dual z axis upgrade kit is compatible with Ender 3/ Ender 3 Pro/ Ender 3 V2/ 3D printer.Easily improve 3D printers with low cost efficiency to Dual Z axis mode. [Smooth Running]Upgrade Single Z-axis structure to a dual Z-axis structure, will make the printer more easy to Leveling, both ends of the X axis are raised and lowered synchronously, which reduces difficulty and frequency of bed leveling obviously. [Increased Accuracy]Dual Z Axis structure reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves stability of 3D printing and increases the printing performance of 3D printer. [Stable Performance]Compared with Closed Timing Belt, this 3D printer parts set still retains the design of stepper motor to ensure screw rod smooth operation. [Easy Assemble] - No need to modify or weld the machine, no need to replace motherboard, this 3D printer accessories kit comes with instructions, could be assemble quickly. for Ender 3/Ender 3 V2/Ender 3 Pro. Colour:black Material:Metal Package Contents: 1 x Z-axis double screw accessories set Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
47500 Printhead For HID Fargo DTC1000 DTC4000 DTC4500 DTC4300 Thermal Printer Condition:New and genuine Model:For HID Fargo DTC1000 DTC4000 DTC4500 DTC4300 Package:1x printhead.
eBay
Size (L * W * H): About 1.5 * 1 * 1 cm / 0.6 * 0.4 * 0.4 inches Material: plastic + metal Color: as shown Amount: 6 pcs Portable and easy to use Suitable for laptops, scanners, printers and other Office devices Temperature: -25 ~ 85 celsius Rated load: DC12V / 0,1A Contact resistance: less than or equal to 0.03ohm Voltage Requirements: AC 500V (50Hz) / min Operating Force: 3-20N Isolation resistance: greater than or equal to 100Megohm Life: 5000 times Package Included: 6 x Connector socket Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
eBay
Upgrade your for Bambu Lab A1 Mini with our advanced Hot End. This 0.2mm/0.6mm/0.4mm/0.8mm hotend ensures superior performance and is specifically designed for quick and easy nozzle replacement, enhancing your 3D printing experience. Ideal for both A1 Mini and A1 series printers, this hotend upgrade promises reliability and high-quality prints. Due to different batches, there may be differences in product appearance and printed text, which will not affect use. Type:0.2mm/0.6mm/0.4mm/0.8mm Colour:As Shown Material:Hardened steel + brass Package Contents: 1 * Hot End Upgrade KIT Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
And other direct thermal printers without the hassle of sheets waste, or jams. 4000pcs thermal labels. Quick Links. Rifle Scope. Tarzana, CA 91356. Specifications：.
eBay