Wharfedale Pro SI 12X 1000W 12 Passive Installation Speaker Tech Specs System type: Passive Configuration: Two way Freq. response ( 3 dB): 60Hz 20kHz Freq. range ( 10 dB): 55Hz 20kHz Sensitivity (2.83 v 1 m): 96dB Calculated max SPL 1 m: 126dB System impedance: 8 Ohms LF Transducer: Size: 304.9mm 12 inch. Voice coil size: 64.3mm 2.5 inch. Rated impedance: 8 Ohms HF Transducer: HF driver type: Compression driver. Voice Coil Size: 44mm 1.75 inch. Exit size: 25mm 1 inch. Diaphragm material: Titanium. Rated impedance: 8 Ohms. HF (re:AES2 2012): 40W. Nominal coverage: 70 degree by 70 degree Power: Continuous power: 250W. Programme power: 500W. Peak power: 1000W. Crossover frequency: 2.4kHz. Input Connector: 2 x NL4 plus barrier strip Hardware: Rigging: 20 x M8 points plus wall bracket. Pole mount: No Enclosure: Enclosure material: MDF. Grille material and finish: 1.2mm steel Dimensions unpacked: Height: 562mm 22.1 inch. Width front: 344mm 13.54 inch. Width rear: 344mm 13.54 inch. Depth: 333mm 13.1 inch Weight: Net weight: 16.7kg 36.7lbs. Gross weight: 20kg 44lbs
AV Parts Master
V7 Professional Wireless Presenter Control your next presentation with the V7 professional wireless presenter. Its ergonomic design with soft touch finish fits comfortably in the palm of your hand and provides 5 control buttons (Page Up, Page Down, Screen Blackout, Play Exit, Laser) to effortlessly navigate through your presentation. The high performance red laser pointer lets you emphasize key points to your audience. Use the Micro SD card reader that is integrated in self storing USB Nano receiver to upload presentations on the fly. Features Ergonomic design with soft touch finish, fits comfortably in the palm of your hand 2.4 GHz secure wireless connection with up to 35 feet range 5 control buttons (Page Up, Page Down, Screen Blackout, Play Exit, Laser) High performance red laser pointer Micro SD card reader integrated in Self storing USB Nano Receiver
AV Parts Master
Improved for 2015, new extruded aluminium upright, improved cable management, improved design and aesthetics, easier to assemble and adjust, same size and specification as original PMVTROLLEY.VESA 75 100 200 300 400 600x400 800x400 Universal fixing points up to 800mm x 400mm Landscape Universal fixing points up to 400mm x 800mm Portrait 1600mm maximum screen height (centre of screen fixing points) Screen can tilt 12 downwards and 5 upwards. Screen can be mounted Landscape or Portrait. Quick and simple assembly Integral cable management within upright. Easy cut trim covers allow simple and infinite cable entry and exit. Supplied with 4x Casters (2x braked) Supplied with 4x adjustable non slip feet. Depth allows easy access through standard door width. Base design allows nesting of one or more trolleys to save space. Optional tether points on rear of stand. Passes standard tilt testing. 35Kgs max weight loading. 5Kgs max weight per shelf.Single box SKU under 1metre.Box dimensions 925mm X 620mm X 135mm 25KgAccessory shelves available separately.PMVTROLLEYSH1 Standard equipment shelfPMVTROLLEYSH2 VC camera shelfPMVTROLLEYSH3 Keyboard mouse shelfPMVTROLLEYCMB (sold separately) Cable management box allows fitment of plug nest or transformer plugs in a lockable steel box, mountable to any point on trolley upright.Security brackets sold separately allow trolley to be fixed to the floor.Finished in durable satin SILVER and BLACK powdercoat.Precision laser cut steel and aluminium components, designed and manufactured in house by PMVmounts in the United Kingdom Corrosion Resistant.High Grade Steel and aluminium parts.This product is covered by the unique PMV Guarantee.All PMVmounts products are designed and manufactured in the UK from the highest quality British materials.
AV Parts Master
Legendary JBL Professional performance housed in a compact form factor; the Control 1 Pro features a professional crossover network coupled with professional drivers making it ideal for even the most demanding near field audio applications. The Control 1 Pro 39;s updated crossover network design provides steeper crossover slopes for exceptional sonic performance and improved consistency throughout the listening area. The included wall mount bracket enables the unit to be secured against a wall or other flat surface. Moreover, the rugged moulded enclosure houses magnetically shielded transducers, making the Control 1 Pro well suited for use with video and computer monitors, or other magnetically sensitive equipment. Features: 150 Watts Continuous Power Handling Professional Drivers and Crossover Network Included Mounting Bracket Transparent and Faithful Sonic Performance Magnetically Shielded Transducers SonicGuard Overload Protection Available in Black or White Finishes Specifications: Frequency Range ( 10 dB) : 80 Hz to 20 kHz Frequency Response ( 3 dB) : I00 Hz 18 kHz Power Capacity : I50 W Sensitivity : 87 dB SPL, 1 W, 1 m (3.3 ft) Maximum SPL : 108 dB continuous, 114 dB peak Directivity Factor (Q) : 6.0 Directivity Index (DI) : 7.8 Nominal Impedance : 4 ohms Crossover Frequency : 4.2 kHz Overload Protection : Full range SonicGuard power limiting to protect network and transducers LF Drivers : 135 mm (5.25 in) low frequency loudspeaker HF Drivers : 19 mm (.75 in) polycarbonate dome tweeter Input Connectors : Spring loaded terminals Enclosure Material : Polypropylene Structural Foam
AV Parts Master
Legendary JBL Professional performance housed in a compact form factor; the Control 1 Pro features a professional crossover network coupled with professional drivers making it ideal for even the most demanding near field audio applications. The Control 1 Pro's updated crossover network design provides steeper crossover slopes for exceptional sonic performance and improved consistency throughout the listening area. The included wall mount bracket enables the unit to be secured against a wall or other flat surface. Moreover, the rugged moulded enclosure houses magnetically shielded transducers, making the Control 1 Pro well suited for use with video and computer monitors, or other magnetically sensitive equipment. Features: 150 Watts Continuous Power Handling Professional Drivers and Crossover Network Included Mounting Bracket Transparent and Faithful Sonic Performance Magnetically Shielded Transducers SonicGuard Overload Protection Available in Black or White Finishes Specifications: Frequency Range ( 10 dB) : 80 Hz to 20 kHz Frequency Response ( 3 dB) : I00 Hz 18 kHz Power Capacity : I50 W Sensitivity : 87 dB SPL, 1 W, 1 m (3.3 ft) Maximum SPL : 108 dB continuous, 114 dB peak Directivity Factor (Q) : 6.0 Directivity Index (DI) : 7.8 Nominal Impedance : 4 ohms Crossover Frequency : 4.2 kHz Overload Protection : Full range SonicGuard power limiting to protect network and transducers LF Drivers : 135 mm (5.25 in) low frequency loudspeaker HF Drivers : 19 mm (.75 in) polycarbonate dome tweeter Input Connectors : Spring loaded terminals Enclosure Material : Polypropylene Structural Foam
AV Parts Master
PMVTROLLEYXL Extra Large Flat Screen Trolley Stand Extra Large TV Trolley Stand for use in AV Video conferencing for 50 90 Screens 50 90 flat screens in Landscape (800 x 600) 55 90 flat screens in Portrait (600 x 800) Tilts downwards up to 16 (Screen size dependent) Screen adjustable to any height on the trolley Large base for increased stability Depth allows passage through standard door width 1.95m Maximum screen height (centre of screen height on mount). Twin extruded aluminum uprights for simple assembly adjustment Cable management through base and up through both uprights 80mm castors (x2 braked) glide feet both included. Polymer board inserts conceal cables are easily cuttable for cable entry exit where required Bracket arms are bolted to the frame for safety but can also be padlocked for added security Utilises PMVMOUNTXFBPT XL tilting portrait mount Includes 100mm width extenders to allow for 800x400 VESA patterns. Fits VESA 200, 300, 400, 600, 600x400, 800x400, 800x600 Universal fitment up to 815mm x 600mm. Finished in matte metallic silver over matte black 100Kg weight limit Simple and quick assembly Specifications Mounting Minimum screen size 139.7 cm (55 ) Panel mounting interface 200 x 200,300 x 300,400 x 400,600 x 400,600 x 600,800 x 400,800 x 600 Number of displays supported 1 Mounting type Floor Minimum VESA mount 200 x 200 mm Maximum VESA mount 800 x 600 mm Maximum weight capacity 100 kg Maximum screen size 190.5 cm (75 ) Ergonomics Cable management Yes Technical details Mounting type Floor Product colour Grey Wheels Yes Cable management Yes Number of wheels 4 wheel(s) Design Product colour Grey Housing material Aluminium, Steel Weight dimensions Package width 1225 mm Package depth 665 mm Package height 155 mm Package weight 37 kg Packaging data Package weight 37 kg Other features Mounting type Floor Wheels Yes
AV Parts Master
RA 55 65 Floor Stand. Fixed Floor Stand for Flat Screens between 55 65 inch diagonal size maximum weight of 75 kg (other sizes available) Ideally suited for applications when the walls of the building are not capable of supporting the weight of a Flat Screen. The rigid steel construction of this stand makes it ideal for use with Touch Screens which are heavier than conventional flat screens. The majority of the screens weight is directed to the floor not the wall itself. A flat screen can be mounted on the stand at various fixed height settings (please see dimensions below). The central upright support tower is hollow box section design to enable all connection cables to be concealed inside and ensure a very neat tidy appearance with a cable entry exit hole positioned at the rear base of the tower. The flat screen can be fitted in Landscape or Portrait format. All our Fixed Floor Stands come complete with a full fitting kit including floor anchor bolts with bolt head cover caps Wall Strap Brackets to eliminate any movement when used with a Touch Screen. Extended Wall Strap Brackets are available to span wall mounted Network Trunking. A Height Adjustable Shelf for a laptop or Media Source Devices such as DVD or Blu Ray Players is available as an Optional Extra and is positioned on the front of the stand under the screen at the required height. Product Dimensions. Height from floor to top of tower 1500mm. Width of tower at widest point 230mm. Floor Plate 590mm x 260mm with 5 fixing points. Floor to maximum centre of screen point 1410mm. Floor to minimum centre of screen point 1225. Finished in durable Black White or Grey powder coating. Weight shown is not including RA LCD Mount or Optional Height Adjustable Shelf. Please Note : AN RA FLAT SCREEN LCD MOUNT SUITABLE TO THE VESA MOUNTING MEASUREMENTS OF THE SCREEN BEING FITTED IS REQUIRED TO ACCOMPANY THIS STAND. THIS IS NOT INCLUDED IN THE PRICE OF THE STAND.
AV Parts Master
Redesigned from the ground up, the CS 1900 ceiling speakers are loaded with quality components resulting in clean, powerful sound. They use the ceiling void as an infinite baffle allowing un restricted driver excursion all of which adds up more bass. Low impedance speakers like these offer better sound that 100 70v line speakers. Perfect for meeting spaces. Front EQ The simple attenuation switch on the front allows the user to fine tune the EQ for the environment. Titanium Dome The large tweeter is made from premium material and pivots to help installers setup the soundscape. Titanium ensures long, stable performance and reduces distortion. Woven Kevlar Kevlar gives smooth audio with incredible detail and transparency. The cone is held in place with a butyl rubber surround to extend the life of the loudspeaker. Magnetic Grill The grill clips into place magnetically once the speakers are secured. Invisible The grill extends all the way to the edge of the speaker resulting in virtually no visible edge. This ultra thin grille allows the technology to visually disappear. Simple to fit A cutout template is included so the installer can easily trace the cut line in the ceiling tile. Cut a 210 mm (8.3 ) hole and turn the dog leg screws from below to fix the speaker; it s quick and easy. Shallow Only 87 mm (3.4 ) deep, the CS 1900 can be placed anywhere around the room to optimally disperse the sound. They fit in any environment which has a false ceiling. Crossover Gold plated terminals and a quality crossover circuit is included which splits the work between the woofer and tweeter. High Sensitivity Ceiling speakers often lack the power of wall speakers, but these have a higher sensitivity of 90dB to cut through high noise presentation environments. Thick Ceiling? The clamps are an extra long 35 mm (1.4 ) to cope with ceilings made of very thick material. Most ceiling speakers can only cope with tiles up to 15 mm (0.6 ) thick.
AV Parts Master