Features: * new and high quality * Applicable scenarios: The print head of this printer is suitable for HP OfficeJet 6600/6100/6700/7110/7510/7512/7610/7612. * High-quality material: The semi-finished print head housing is made of high-quality ABS, which is more wear-resistant and durable. * Excellent performance: high-performance upgraded 933932 print head chip, faster ink cartridge recognition, smooth inkjet, clear printing and bright colors. *Smooth operation: After many tests to ensure the performance of the print head, let your printer run smoothly. *Installation: The kit contains 1 print head, no contacts are installed, and the contacts of the original print head need to be removed and installed before use. Specification: Item Type: Semi-finished Printer Head Material: ABS Compatibility: For HP OfficeJet 6600/6100/6700/7110/7510/7512/7610/7612 Recommendations: 1. The surface of the print head must be well protected and must not be touched, because the surface layer is an aluminum plate, and the inner layer is coated with a crystal oscillator and a small ink tube. Once contacted, it will be deformed or broken, causing the print head to be scrapped and unable to work. 2. When installing the print head, be sure to cut off the power and install it in place. After the installation is complete, gently push it left and right with your hands to check whether it is flat. Turn on the power after confirming that it is flat, because if the print head is not in place, the print head is easy to break when the carriage moves. 3. Do not carry the ink cartridge when turning on the machine, and make sure that the ink is in good contact with the socket, and do not touch the feet, otherwise the print head will be short-circuited and burned 4. Check whether there is a lack of water in the ink cartridge, and check whether the small cleaning blade and the ink suction pump are dirty 5. There is air in the newly installed print head, it may not work at fir st. The air inside the printhead must be expelled for it to function properly. The printer can be cleaned intermittently by removing the air from inside the print head (clean only twice at a time, then stop for 30 minutes, then clean 2 times) 6. Please note that the new and old models of this product will be shipped randomly, please make sure you don't mind before placing an order. 7. Please note that when the product leaves the factory, it is a semi-finished print head without contacts installed, and the customer needs to disassemble the contacts of the original print head before it can be used. Package Included: 1 * print head Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2.Please allow slight manual measurement deviation for the data. _x000D_
Fruugo United Kingdom
UPA USB Programmer Description:New Upa-usb is the full set with all adapters, The main Device can be directly connected to the Elrasoft.com UUSP (UPA-USB Serial Programmer) or by an optional DB9 male / female 1:1 extension cable. It's equipped with an 40pin ZIF Socket for all narrow and wide DIP / DIL devices as well as with a 16 pin SOIC ZIF (150mil, narrow) socket to cover most commonly used devices. Device configuration is done over special config keys which make the work convenient and safe compared to wiring up all manually. Additional packages can be covered by commonly available Adapters plugged into the 40 pin ZIF socket. The main Device further includes a 10 pin ISP connector where the included ISP Adapters can be connected using a standard 1:1 flatribbon cable (included). The included PLCC ISP Adapters are to be put directly over the soldered chip of the target device making the work convenient and safe compared to soldering or using clips connecting up all manually. (Power from the UUSP to the ISP target can be enabled or disabled by a jumper next to the 10 pin ISP connector) New UPA USB Programmer with Full Adaptors Language: English. Software Vesion: V1.3 UPA-USB Device Programmer V1.3 Update : Added MC9S12HY64/HA32 support Added Serial Flash memory support: A25L512/010/020/040/080/016/032, SST25VF512A/010A/020B/040B/080B/016B/032B, S25FL004A/008A/016A/032A/064A Added 24C1024, 24C1025 support Added Bulk erase data memory to PICs 16F913-7/946, 12F629/675 Added script function GetPage Added script function AutoBaudRateDevice (hc08 devices only) Added script function GetProgrammerFrameChildCtrl( AChildCtrlName: string): TControl Added script function EnablePicMemoryAreas ( AProgram, AID, AConfig, ACalibration, AEEPROM: boolean ): boolean; Fixed bug with script functionsProgramDevice, ReadDevice ... when used with PICs Fixed bug with SetHC08SecurityBytes (SecBytes: string) function Fixed bug with 68hc11 reading if Oscillator is not set to Auto Updated script example files The software is digitally signed USB driver upausb.sys is digitally signed Colour:As shown Material:plastic Package Contents: 1 x UPA USB V1.3 Programmer With Full Adapter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Feature: 1. Large Range: The working range of this VFO is 10kHz to 220MHz, with 0.5PPM high precise TCXO clock, the frequency change is more accurate.2. Bar Graph Indicator: With bar graph indicator for strength and 20 band presets, can also be used as RF or clock generator.3. 2 Wire Connection: Support I2C data transmission, only need 2 wires to connect the display screen or Si5351, very convenient for connection.4. High Stability and Accuracy: The frequency generation of the VFO meter has high stability and accuracy, simple and effective.5. Excellent Material: Made of precise wiring PCB board, stainless steel and aluminum shell, has long last durability for long term usage. Specification: Item Type: VariableFrequencyOscillatorMaterial: PCB, Stainless Steel, Aluminum ShellOperating Range: 10kHz to 220MHzPower Supply Mode: 3.7V 1000mAh lithium battery (built in)FM Mode:1. Rotate Encoder Knob: Adjust the volume or frequency. When the encoder is rotated at the beginning, the knob can adjust the volume, press the encoder once, the knob can adjust the frequency.2. FM: When the page is in AM mode, press the FM button once, the page becomes FM mode.3. BWF: Bandwidth, press the button to change the size of the bandwidth, there are five options: AUTO, 40 K, 60K, 84K, 110K.4. AM:When the page is in FM mode, press the AM button once, the page changes to AM mode.When the page is in AM mode, short press the AM button to increase the frequency, long press the AM button to decrease the frequency.5. SAV:Short press to change the size of TS (step frequency), there are five gears: 0.1MHz, 1MHz, 2MHz, 5MHz, 10MHz.Long press to save the changed TS (step frequency).AM Mode:1. Rotate Encoder Knob: Adjust the volume or frequency. When the encoder is rotated at the beginning, the knob can adjust the volume, press the encoder once, the knob can adjust the frequency.2. FM: When the page is in AM mode, press the FM button once, the page becomes FM mode.3. BWF: Bandwidth, press the button to change the size of the bandwidth, there are five options: 0.1K, 1K, 2K, 5K, 10K.4. AM:When the page is in FM mode, press the AM button once, the page changes to AM mode.When the page is in AM mode, short press the AM button to increase the frequency, long press the AM button to decrease the frequency.5. SAV:Short press to change the size of TS (step frequency), there are four gears: 1KMHz, 5KMHz, 10KMHz, 100KMHz.Long press to save the changed TS (step frequency). Package List: 1 x VariableFrequencyOscillator 1 x Antenna 1 x USB Cable
Fruugo United Kingdom
Features:This product is made of high quality metal material, strong and durable.433MHZ wireless module small suction cup antenna for various modules, height is about 31cm.10dBi high gain, greatly improving signal reception stability.Pure copper oscillator signal is stronger and more stable.The base is magnetically mounted, not easy to fall off, and can be adsorbed on various devices.Specifications:Material: MetalSize: Approx. 32*4*4cm/12.60*1.57*1.57inchModel: 433-10DBI Sucker AntennaWorking Frequency: 433MHzImpedance: 50ohmAntenna gain: 10dBiAntenna Height: Approx. 31cm/12.20inchFeeder length: Approx. 3m/9.84ftSWR: 1.8Polarization: HorizontalInterface Model: SMA Internal thread internal pinAppearance: Barrier spring suction cup with 174 pure copper cableCompatible Model: 433 Wireless ModulePackage list:1 x Antenna.
Fruugo United Kingdom
Features:On-board DIP-switch, you can easily adjust the drive segments. Integrated drive to prevent short circuit of the chip, integrated heat sink.Terminal-power connector for easy connection drive power. Compatible with 12 / 24V drive scheme.Supported: offline controller, external high-power drive, emergency-stop, reset, continue, pause, limit-switch interface, which can meet different-needs.Both the data transmission chip and the-main control chip use an external crystal oscillator, the transmission operation is-more stable.Can be used for laser engraving machine, drawer machine, cnc engraving machine. Specifications:Material:PlasticSize:As Picture Shown Note:Please allow 1-2cm errors due to manual measurement, make sure that you do not mind before you order. 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item.Thanks for your understandings. Package includes:1x 3-axis Control Board
Fruugo United Kingdom
Description Round Corners: The arc design can effectively care for your skin compared with the traditional square corners. Long Power Cord: This cord reduces usage restrictions and further protects your safety. Protective Baffle: The protective baffle on the top can effectively reduce the sliding of items during vibration. Application This product can be widely used in dental clinics, hospitals, decoration industries, handicraft shops, factories, laboratories, and other places to make various plaster models and eliminate foam. It is an ideal choice for dentists, craftsmen, etc. How to Use 1. Before powering on, set the strong/weak switch to the middle position O. 2. After turning on the power, press the power switch (the power indicator light is on), choose strong vibration or low vibration, and place the gypsum model that needs to be shaken on the vibration disk. 3. Turn on the adjustment knob, adjust clockwise to increase vibration intensity, and counterclockwise to decrease vibration intensity. 4. After the model oscillation is completed, turn off the knob to stop vibration and remove the model for use. Specification Color: White, Black Material: Metal, Copper, Rubber Motor Type: Pure Copper Motor Surface Treatment: Painting Style: Modern Shape: Rectangular Number of Items: 1 Assembly Required: No Mount Type: Countertop Type: EU Standard Model: JG-203 Power: 120W Voltage: 220V 60Hz 10% Current: 3A Maximum Loading Capacity: 2kg/4.41lbs Gears: 2 Screw Type: M6 Gross Weight: 3.92kg/8.64lbs Net Weight: 3.67kg/8.09lbs Package Size: 21*13*25cm/8.27*5.12*9.84inch Product Size: 20.7*10.5*9.4cm/8.15*4.13*3.7inch Package Included 1* Dental Square Quartet Vibrator 1* Chinese Manual Notes 1. Please note that the model is not included in the packaging. 2. Please place the item on a flat surface. When adjusting the density, it should be adjusted in small amplitudes, slowly from small to large or from large to small 3. Please note that the power supply used for the oscillator should be reliably grounded. Please cut off the power and scrub the surface of the body in time after use to prolong the service life. 4. When the vibration noise suddenly increases during work, accompanied by abnormal sounds, it may be due to abnormal clearance between the vibration platform and the transformer. You need to cut off the power supply, peel off the rubber platform, turn the device upside down, and use a cross screwdriver to remove four M6 screws to separate the vibration platform from the body. Then check each of the four vibration columns for looseness or improper height. It is advisable to adjust the height to 68mm/2.68 inch, keeping the height of the four columns consistent and locking them tightly. (Adjusting tool: 10mm/0.39 inch opposite hexagonal socket wrench). 5. Please pay attention to electrical safety, take personal protective measures, and keep the product away from children.
Fruugo United Kingdom
Adopts msi2500 msi001 scheme, simplified RSP1 circuit, the interface is USB Type-C interface. Equipped with 5 antenna interfaces correspond to different frequency bands, 0-30MHz, 30-60MHz, 120-250MHz, 400-1000MHz, 50-120MHz. Effective frequency ranges from 10KHz to 1GHz, 12bit resolution, full 10M real-time visual bandwidth (real-time monitoring of 10M wide signal ranges, such as 430-440MHz). Wide applications, suitable for frequency modulation, AM amplitude modulation, SSB unilateral Band, broadband and narrowband analogs, digital broadcasting, and etc..? Compatible with four platforms: for , Linux, MacOS, and Android. It perfectly supports mainstream software such as for HDSDR, consol, and GNURadio. (Devices for Android need to support OTG). :ELECTRICAL Model Number:Radio Receiving Moudle Name: Receiver Item size: 94 x 53 x 15mm / 3.70 x 2.09 x 0.59inch Item weight: 82g / 2.89ounce color:Black Material:plastic Package Contents: 1 x Receiver 1 x Cable Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Made of high quality materials, convenient, easy to use and operate, wide range of applications, long service life. Features: The transmitter has 8 function keys (6 single speed keys + 1 start key + 1 stop key). The number of transmitter control points can be up to 8. The transmitter has a security key switch to prevent unauthorized use. The transmitter can be connected to the computer via the data cable to set the button function mode. The transmitter has a low battery warning device and the voltage is insufficient to automatically turn off the circuit. The nylon fiber case is comfortable to the touch, sturdy and drop-resistant, waterproof, anti-corrosion and insulated. Transmitter and receiver boards with crystal oscillator for stable performance. IP65 protection level, waterproof, dustproof, drop-proof, can adapt to different environments. With wireless antenna technology, the signal is stronger and the power consumption is lower. The external antenna avoids the signal shielding of the body. The receiver is supplied with a high quality pure copper cable that is 1.3 meters long and has a purity of 99.9%. The color is bright and clear, and it is equipped with a U-shaped terminal block for quick wiring. 360 degree accessible remote control, 5.0 remote control system, strong penetration, no need to aim. Specifications: Main Material: Fiberglass Reinforced Nylon Main Color: Orange + Black Type: F21-E1B Transmitter: Protection Level: IP65 Transmitting Power: 10dBm Battery: 2*AA batteries (not included) Code: 32 digits ( 4.3 billion groups) Temperature: moderate temperature Control distance: 100 meters Item size: 165*75*46mm/6.5*3.0*1.8in Item weight: 279g/9.8oz Receiver: Protection level : IP65 Receiving distance: 100 meters Sensitivity: -110dBmCode: 4.3 billion codes, not commonTemperature: moderate temperatureElectric shock capacity: 8 amp fully sealed relay inputPower: DC12-72VItem size: 190*88mm/ 7.5*3.5inItem Weight: 655g/1.4lbPackage Size: 310*210*170mm/12.2*8.3*6.7in Package Weight: 1259g / 2.8lb Package List: 1 * Transmitter1 * Receiver1 * Protective Case2 * Fuse Sells From Shenzhenshizekaikuajingdianshangyouxiangongsi
Fruugo United Kingdom