New Arrivel For BMW INPA K+CAN With FT232RL Chip with Switch, works on BMW with 8 pin and with K-LINE protocol. Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 20013 (all functions as in OMNITEC interface). Build in 2 lines K and D-Can magisterial INPA K+CAN for BMW Features 1. Read and delete errors 2. Adaptations 3. Driver programming 4. Applu coding - And others... INPA K+CAN for BMW Supports Protocols 1: Fast magisterial D-CAN and PT-CAN (500 kbit/s) 2: Slow magisterial K-CAN (100 kbit/s) 3: Standard BMW protocol (BMW OBD interface). D-CAN for 1: E60, E61 od 03/2007 2: E83 od 09/2006 3: E81, E87 od 03/2007 4: E90, E91, E92, E93 od 03/2007 5: E70 (new model X5) 6: R56 (new model MINI) PT-CAN, K-CAN - fully switchable speed of magisterial CAN - you can diagnose driver without any car Protocol for BMW OBD interface for Older Cars From 1995 to 1998 (don't need K-line). From 1998 to 03/2013 (all models) Package Including: 1pc x K+CAN for BMW INPA Cable with Switch 1pc x CD Driver
Fruugo United Kingdom
no battery untested
eBay
1. Latest version for greater for compatibility 2. Manufactured modification to include a switch to connect to different CAN buses 3. Designed for software 4. Compatible with software venders: , (Just support Baud rate:34800,pls check before place order), FF2 and FoCCCus, plus more Basic Features:Reset fault /trouble codes / parameter (PIDs),Change car configuration data,Run tests, procedures MS CAN bus and CAN bus support USB 25k80 With Switch For DiagnosticCable Product Introduction: One OBDII OBD2 USB with switch. Designed for communicating with for , for vehicles. With this cable and of the supported software vendors you can detected modules which are not visible for regular OBD2 scanners.This includes showing you trouble codes, PIDs, running tests and procedures which are never displayed by other OBD2 scanners and a standard . Pin Configurations: Switch outside: CAN - Occupies pins 6 and 14 Switch inside: MS CAN - Occupies pins 3 and 11 Supported Software: (Just support Baud rate:34800,pls check before place order) FoCCCus Modified EML: Please note that many for and for for models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular CAN bus. In contrast to CAN bus, MS CAN bus is not supported by the stock , because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins. This has been modified to allow it to implement the MS CAN bus. supports CAN from the stock, because for CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11. Colour:As Shown Material:ABS Package Contents: 1 * Diagnostic Scan Tool Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
The Zebra Symbol TC75 TC75BH Computer Barcode Scanner is a wireless device designed for Point of Sale (POS) machines, compatible with Android systems. This bundle includes 5 units of barcode scanners from the trusted brand Symbol, ensuring reliable performance for your retail or industrial business needs. Whether for spares or repairs, these barcode scanners offer a seamless connectivity solution for efficient inventory management and customer service at the checkout point. come with charger and charging dock Power up with the zebra log and gose to battery at 10% then cuts out and dosent power up with being in charger dock
eBay
Top 5 Reasons to Get AdblueOBD2 Emulator for Trucks:1. ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned. 2. ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors. 3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system. 4. ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting. 5. ADBlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug adBlueOBD2 from OBD2 connector. AdblueOBD2 Emulator for Trucks AdBlueOBD2 is a Plug&Drive Ready device to mulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged adBlue SCR system.dBlueOBD2 is easy to install. Installation and Calibration for Trucks: 1. Pull the Key out from the ignition. 2. Remove the following Fuses (For ) Terminal - 15 Terminal - 30 3. Plug adBlueOBD2 into OBD2 connector 4. Turn on the ignition and check the level of adBlue, if it shows 50% or 70%. 5. If any fault light appears on dashboard, delete via service scanner. Material:plastic colour:As shown Package Contents: 1 * adBlue OBD2 Emulator Box Interface Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
eBay
Estimated remaining times are shown for ECU flash operations. Diagnostic protocol contains interruptions of sessions, extended measurement values, improved ECU communication view,used diagnostic hardware, connection type of diagnostic hardware, , the used and submissions of support requests The measured value display has been improved. Documents in are displayed in separate . One message box be shown at the beginning of the test drive mode. hotfixes can be integrated during diagnostic sessions. 6154A DOIP Note: 1. Software is too large, the available capacity of the computer C drive should be at least more than 30G 2. Please install on WIN10/WIN11 3. It supports online function, but you need to get online account by yourself ! 4. extra THREE softwares as free gifts: - S V23.05 - Engineering V17.0.1 - ELSAWIN V6.0 (U Stick is S V23.01 with keygen and E V17.0.1 with keygen , you can use keygen to activate by yourself) Description: This new 6154a is the latest full system diagnostic and programming interface, which can read and clear code, dynamic data flow, programming,coding, and personalized settings,including maintenance information systems, technical briefings, circuit diagrams, component drawings, diagnostic guidelines, etc. 6154A DOIP Covered model: For : 1995Y-2023 MY+ For : 1995MY-2023 MY+ For Seat: 1995MY-2023 MY+ For : 1995Y-2023 MY+ For MAN: 1995MY-2023 MY+ 6154A DOIP Functions: Danger messages have been revised. Stopping of diagnostic sessions may be interrupted. Automatic deletion of autosave diagnostic protocols after successful transmission. Selection of PassThru diagnostic hardware has been improved. If you are not professional for technology, please don't buy this product. Colour:As Shown Material:Plastic Package Contents: 1 * 6154A DOIP CAN FD Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
The item is supplied in good working order.
eBay
EDIAG ELITE Supports Bidirectional Control Function:Bi-Directional Control capability and is capable of performing Active Tests to access vehicle-specific subsystems and component tests. The tester outputs commands to the ECU to drive the actuators in order to determine the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators. For example , x431 v have the ability to actuate relays, injectors, coils, or perform system tests, etc. Also it actuate solenoids valve and actuators for active testing to identify the error easily moreover. The bidirectional functions are quite extensive. EDIAG ELITE Supports Full OBD2 Function:Reading Codes Show the detailed description of the Diagnostic Trouble Code (DTCs) Erasing Codes & Reset:Turns off Check Engine Light (), clears codes and resets monitors. Data Stream:Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data. Readiness Status:Shows whether the emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing. Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display. View Freeze Frame Data:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. O2 Sensor Test:Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer. Read Vehicle Information Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number) Colour:As Shown Material:ABS Package Contents: 1 * Car OBD2 Diagnostic Tool Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
eBay
For Bmw G20 G22 G29 X5 G05 X6 G06 X7 G07 G14 G15 Features: * Crafted from pure transparent high-grade crystal, our crystal gear head showcases a beautiful brilliance effect through unique cutting, combining a fashionable design with solid material for a high-quality and premium feel. *Elevate the interior of your with our noble and sleek crystal knob design. The carefully polished multi-faceted edges attract attention from any angle, providing a comfortable and worry-free control experience. *Experience the ritualistic feeling of starting your car with our crystal start button. The exquisite crystal inlay captures and reflects dazzling light, adding a captivating element to your driving experience. *This crystal decoration set adds a touch of fashion and luxury to your car while prioritizing functionality. Every detail is meticulously crafted, making it more than just a decoration, but also a symbol of your pursuit of a high-quality life. Specifications: Material: Man-made Crystal + ABS Installation : Direct Replacement Place on Vehicle : Inner, Center Fitment: For BMW 3 Series G20/G21/G28 (2020-2022) For BMW 4 Series G22/G23/G26 (2021-2022) For BMW 8 Series G14/G15/G16 (2019-2022) For BMW X3 iX3 G01/G08 (2022-2023 For BMW X4 G02 (2022-2022) For BMW X5 G05 (2019-2022) For BMW X6 G06 (2020-2022) For BMW X7 G07 (2018-2022) For BMW Z4 G29 (2019-2023) For BMW i4 G26 (2022-2022) Note: 1. this item fits for right hand drive car only!!! 2. this item fits for MGU model car only, E & F & G Chassis cars are not ok!!! 3. this item fits for automatic gear shift knob car only!!! Package Content: 1 X Gear Shift Knob 1 X Meida Knob 1 X Engine Start button
Fruugo United Kingdom
, Condition: Tested and working in good, used condition , . , Brand: Symbol , MPN: LS9208-SR10007NSWW , Model: Symbol LS9208 , Type: Barcode Scanner , Included items: Barcode scanner with USB cable & stand Please note: We do not post to PO boxes. We are happy to help, any problems or questions please send us a message and we will endeavour to resolve the issue promptly.
eBay
Enhance your 3D scanning accuracy with our 3D scanning markers, designed to improve the precision of your digital reproductions. Constructed from PET and reflective film material, these markers and resistance to wear and tear. Featuring a reflective film , our markers have excellent visibility and performance in various conditions. Our 3D scanning markers are easy to apply and remove, providing a easy user experience for professionals and hobbyists alike. The positioning targets ensures secure placement on multiple surfaces, allowing for versatile use across different scanning projects. Inner diameter: 3mm, outer diameter: 6mm Colour:As Shown Material:PET Package Contents: 10 x sheets of reflective film marking points (100 pieces/sheet) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Fujitsu FR-410 Receipt Scanner with power adapter. Sold as a complete set, ideal for those familiar with POS systems or looking for a repair/upgrade project. The Fujitsu FR-410 Receipt Scanner powers up, but I have not been able to test printing.
eBay
Features 1. Clear Check Engine Light: This iCar Pro code reader will help you save money and accurately diagnose check engine light issues. Very easy to use. 2. Easy installation: Most cars manufactured in the past 20 years are equipped with an OBD2 diagnostic port, simply locate the port and plug it into iCar Pro. 3. Don't worry after installation: You can really install it without worrying because of its small size and unique power-saving function, which can protect your battery 4. Can be used with hundreds of applications:Bluetooth low-power device can be used with the most popular OBD applications. Please find the download instructions for Android devices in the product manual. Functions: Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning. (over 3000 generic code definitions in the database). Clear trouble codes and turn off the MIL ("Check Engine" light) Engine RPM Calculated Load Value Coolant Temperature Fuel System Status Vehicle Speed Short Term Fuel Trim Long Term Fuel Trim Intake Manifold Pressure Timing Advance Intake Air Temperature Air Flow Rate Absolute Throttle Position Oxygen sensor voltages/associated short term fuel trims Fuel System status Fuel Pressure Tips before your purchase: For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant. To be sure your vehicle complies with OBD-II, look for a sticker on the vehicle under the hood in the engine compartment that clearly states OBD II compliant or certified. OBD-II protocols supported: ISO 9141, KWP2000SAE J1850 CAN J1850 VPW,J1850 pwm Vehicle Coverage: Works on all OBD2 Vehicles (1996 onwards in USA) and EOBD vehicles (Petrol cars from 2001 and diesel cars from 2003/2004 in Europe) How to setup Bluetooth pairing: BLE4.0 Dual mode version For Android users: Home screen Go to setting page Select V-LINK Default password is 1234 Device paired Go to Torque app OBD II adapter setting Choose connecion type>Bluetooth Choose Bluetooth device>V-LINK Exit Torque app completely Run Torque app Connected For iOS users: Home screen Go to setting page Click on Bluetooth function (Device name is invisible) Run Accurate app Go to Accurate app setting page Select Bluetooth and connect Exit Accurate app and run again Connected Specification: Supply Voltage: 11.5V15V Supply Current: <200Ma Operating Temperature: -40--85 Operating Humidity: 5%--95%RH Non-Dewfall Specification Color: Black/Green/White/Orange/Red Size: 11.5 x 9.2 x 3.5 cm Weight: 68 g Package Include: 1 x Wireless OBD2 scan tool 1 x User Manual
Fruugo United Kingdom
In good condition, 2 batteries are delivered without charging.
eBay