Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showPackage includes:1PC A1/A2/A3Features:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations.Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.
Fruugo United Kingdom
eBay
Feature:1. Low polymerization shrinkage, used for filling teeth.2. High strength and polish, similar modulus of elasticity with dentin.3. Radiopaque and fluoride that release optimal polishability and high shadow stability.4. Easy mold and easy to stick to the orthodontic support.5. It is used for all types of cavity preparations, easy and convenient to use.Specification:Condition: 100% Brand NewItem Type: Light-Curing Composite ResinMaterial: ResinFunction: Fill teethCapacity: 2.5gOptional Style: A1 Light Yellow, A2 Medium Yellow, A3 Medium Dark.Package List:1 x Light-Curing Composite Resin
Fruugo United Kingdom
Good condition Removed from a 2011 with 80k
eBay
New and nice qulity, Easy install and durable use.Correct Connector No cutting or splicing.Built to quality control standards, Not easy to damage, long service life Stable performance, high reliability, a perfect replacement for your old ones. Made of high quality material,Give a sophisiticated look for your car Turbo Reference Number:04E145701B / 04E145701BV / 04E145701BX /04E145703T / 04E145703TV / 04E145703TX /04E145704C / 04E145704CV / 04E145704CX /04E145704P / 04E145704PV / 04E145704PX /04E145713A / 04E145713AV / 04E145713AX /04E145721B / 04E145721BV / 04E145721BX /04E145721F / 04E145721FV / 04E145721FX /04E145704Q / 04E145704QV / 04E145704QX /04E145721C / 04E145721CV / 04E145721CX /04E145721G / 04E145721Gv / 04E145721GX Interchange Part Number: 04E 145 725 S 04E145725 S Actuator Part Number:04E145725S, 04E198725M, 04E198725E, 04E198725B, 04E145725AD, 04E145725BK Type: Turbocharger Actuator Servo Motor Fitment Type:Direct Install Placement on Vehicle: Engine Turbo Chargers Blow Valve Part Number:04E145725AD 04E 145 725 AD Fitment: for A1 1.4 CPTA 2013-2014 A1 1.4 CZCA, CZEA 2014-2018 A3 1.4 (8V) CPTA, CXSB, CZCA 2013-2016 A3 1.4 CUKB, CZEA 2014-2017 for Seat II 1.4 CZDA 2015- IV 1.4 CPTA 2015- IV 1.4 CZEA 2015 - 1.4 CHPA, CPTA 2012-2014 1.4 CZEA 2014-2018 for III 1.4 CHPA 2012-2015 III 1.4 CHPB, CZDA 2015-2017 1.4 CZCA, CZDD, CZDB 2015-2017 for 1.4 CZDA, CZEA 2014- CC 1.4 CZDA, CZEA 2015- 2016 Golf VII 1.4 CHPA, CPTA 2012-2014 Golf VII 1.4 CZCA, CZDA, CZEA 2014-2017 V 1.4 CPTA 2012-2014 V 1.4 CZDA, CZEA 2014- II 1.4 CZDA 2015- 1.4 CZCA, CZDA, CZEA 2016-2018 Colour:black+silver Material:plastic+metal type:Long Package Contents: 1 x Boost Turbocharger Actuator Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
TYRE IN GOOD CONDITION 7MM SEE PICTURES! Alloy Wheels. 100 % safe and secure.
eBay
Type: Intake Pressure Sensor Condition: Quality, High level of accuracy Fitment Type: Direct Replacement Pressure Range: 10-330 Kpa Voltage limitation: 405-4750 mv Other Part Number: 038906051C, 0281002401 For A1 (8X1, 8XK) 2010.05-2018.10 For A1 Sportback (8XA, 8XF) 2011.09-2018.10 For A2 (8Z0) 2000.02-2005.08 For A3 (8L1) 1996.09-2006.09 For A3 (8P1) 2003.05-2013.12 For A3 cabriolet (8P7) 2008.04-2013.05 For A3 Sportback (8PA) 2004.09-2015.12 For A4 (8E2, B6) 2000.11-2005.12 For A4 (8EC, B7) 2004.11-2008.06 For A4 (8K2, B8) 2007.08-2015.12 For A4 Allroad (8KH, B8) 2009.04-2016.05 For A4 (8E5, B6) 2000.02-2005.12 For A4 (8ED, B7) 2004.11-2008.06 For A4 (8K5, B8) 2007.11-2015.12 For (7V8, 7V9) 1996.04-2010.03 For (5P1) 2004.03-. For XL (5P5, 5P8) 2006.10-. For (6L2) 2002.09-2009.11 For EXEO (3R2) 2008.12-. For EXEO (3R5) 2009.05-. For III (6L1) 2002.02-2009.11 For IV (6J5, 6P1) 2008.03-. For (1M1) 1999.11-2006.06 For (1P1) 2005.05-2013.12 For TOLEDO II (1M2) 1998.10-2006.05 For TOLEDO III (5P2) 2004.04-2009.05 For : For FABIA I (6Y2) 1999.08-2008.03 For FABIA II (542) 2006.12-2014.12 For FABIA II (545) 2007.10-2014.12 For I (1U2) 1996.09-2010.12 For I (1U5) 1998.07-2010.12 For II (1Z3) 2004.02-2013.06 Colour:black Material:plastic Package Contents: 1x Pressure Sensor Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
(Part Number 8XA601025A. Model A1 8x Tfsi Sport. Vehicle Reference P34. WE STRIVE TO ENSURE THAT ALL OUR PARTS ARE AT THE HIGHEST QUALITY AND CONDITION. 9) our warranty covers the cost of the part, and no other costs incurred.
eBay
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showQuantity:1pcsFeatures:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations. Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.Scope of application: Non occlusal cavity filling repair.Attention: Close the lid immediately after use to avoid exposure to light.Contraindications: For pulpitis, use with caution. When penetrating the pulp or near the pulp chamber, it is necessary to perform pulp capping and pulp protection surgery before filling with resin. Other pulp diseases should be treated before filling.Storage conditions: Store at room temperature and avoid direct sunlight.
Fruugo United Kingdom
AUDI S1 A1 S-LINE 2010-2017, but will fits GB new models 2018-2025. Freshly refurbished, professionally powder coated in high-quality matt audi grey and diamond cutted and powder lacquered. Genuine Audi wheels set.
eBay
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showQuantity:1pcsFeatures:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations. Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.Scope of application: Non occlusal cavity filling repair.Attention: Close the lid immediately after use to avoid exposure to light.Contraindications: For pulpitis, use with caution. When penetrating the pulp or near the pulp chamber, it is necessary to perform pulp capping and pulp protection surgery before filling with resin. Other pulp diseases should be treated before filling.Storage conditions: Store at room temperature and avoid direct sunlight.
Fruugo United Kingdom
eBay
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showQuantity:1pcsFeatures:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations. Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.Scope of application: Non occlusal cavity filling repair.Attention: Close the lid immediately after use to avoid exposure to light.Contraindications: For pulpitis, use with caution. When penetrating the pulp or near the pulp chamber, it is necessary to perform pulp capping and pulp protection surgery before filling with resin. Other pulp diseases should be treated before filling.Storage conditions: Store at room temperature and avoid direct sunlight.
Fruugo United Kingdom
Look no further for your space saver wheel! Audi A1 Citycarver 19-22. Breakdown kit includes Gloves, Head Torch, Hi-Vis Jacket, Kneeling Matt, Rain Poncho and Warning Triangle. Full details of the wheel and tyre are below.
eBay
Condition: Type: Front Rear Mudguard Splash Guards:4pcsFitment: For Transporter//for (T5 / T6) 2008-2018Deluxe Molded Splash Guards lower body protection and the vehicle styling. Made of TPO Plastic to be rigid and paintable. They are molded to the of the vehicle for a custom fitThese tough-wearing guards seamlessly with the vehicles styling and minimise the risk of dirt, road debris and stone up from the Front and rear tyres. additional protection whilst enhancing the exterior of your vehicleInstallation instructions:1,the car at the bottom of the car screws with a wrench to screw down2,take on the flaps , good location, the screws installed3,the screws installed in the corresponding hole on the flaps.4,the rest of the holes installed can be installedcolour:blackMaterial:ABSPackage Contents:4* Flaps (With screws)Only the above package content, other are not included.Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed is +/- 1-3cm.
Fruugo United Kingdom
AUDI A1 (8X1, 8XK) 1.0 TFSI 01.2016 - 10.2018 60 82 999 Hatchback. AUDI A1 (8X1, 8XK) 1.0 TFSI 03.2015 - 10.2018 70 95 999 Hatchback. AUDI A1 (8X1, 8XK) 1.2 TFSI 05.2010 - 04.2015 63 86 1197 Hatchback.
eBay