The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: BlackCable type: RoundCable length: 6mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 6m, black All components used must support this feature.
AV Parts Master
Manufacturer Part NumberLAUNCH X431 CRP919X BT. Type2025 Newest 100% Original LAUNCH CRP919X BT. EL-50448 TPMS Reset Relearn Diagnostic Tool Car Tire Pressure Monitor Sensor UK. Similar Model 2MS906 MS906BT MS906TS MS908S PRO MK906 PRO.
eBay
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: BlackCable type: RoundCable length: 10mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 10m, black All components used must support this feature.
AV Parts Master
β OE-Level 4 System Diagnoses:Engine/Transmission/ABS/SRS Diagnoses Scanner OBD2. >>>Why Choose ThinkScan Plus S5 Car Diagnostic OBD2 Scanner?. FULL 10 OBD2 FUNCTIONS-MAKE A BETTER DETECTION FOR CAR ENGINE SYSTEM!
eBay
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: WhiteCable type: RoundCable length: 30mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 30m, White All components used must support this feature.
AV Parts Master
A Larger Battery Capacity. CRP919E is 6100 mAh battery capacity and M 808S is 5000 mAh.Ours adopts 2.0Ghz 4-core high-efficiency processor, 4GB RAM+64GB ROM large storage, and is equipped with a high-endurance battery, which runs faster, more stably and lasts longer.3.
eBay
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: WhiteCable type: RoundCable length: 15mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 15m, white All components used must support this feature.
AV Parts Master
Why Millions of Car Owners Choose Foxwell NT624 Elite?. Foxwell NT624 Elite Can scan all these modules, read fault codes, help you locate problem. 1 x Foxwell NT624 Elite Car OBD2 Diagnostic Scanner.
eBay
5Γ 10/100/1000 Mbps Auto-Negotiation RJ45 ports supporting Auto-MDI/MDIX Plug and play, no configuration needed Supports 802.1p/DSCP QoS and IGMP Snooping functions Durable metal casing, desktop/wall-
AV Parts Master
This pairing turns the AritDiag 900 Lite scan tool into a hi-tech battery testing tool. [Newly Released DTC Repair Guide Function] : Easily diagnose issues with your vehicle and receive guidance on repairs with the topdon scan tool's fault code definitions for all systems,maximize your diagnostic capabilities.
eBay
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: WhiteCable type: RoundCable length: 70mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 70m, black All components used must support this feature.
AV Parts Master
ANCEL AS200, featuring full 10 modes of OBD2 functions, DTC Lookup, 1.77" LCD color display. Full 10 OBD2 Functions (Engine Check). Need standard obd2, and release year from2004-now. Need standard obd2, and release year from2001-now.
eBay
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: WhiteCable type: RoundCable length: 20mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 20m, white All components used must support this feature.
AV Parts Master
Top Reasons to Choose Foxwell GT60 πWide Compatibility οΌGT60 provides quick and easy diagnosisfor 108+car makers, Over 20000 car models coverage. Compatible with the latest 2022/2023 models,including cars, SUVs, minivans, light-duty trucks sold worldwide.
eBay
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: BlackCable type: RoundCable length: 50mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 50m, black All components used must support this feature.
AV Parts Master
π₯π₯π₯γ2025 Huge Function Update, MK808S Equal to MP808γ Big Surprise! And Auto Scan can perform a comprehensive scan on all available systems of your vehicle. MK808S Scanner support English, Spanish, French, Portuguese, German, Russian, Japanese, Chinese, Korean and etc.
eBay