Showing results for bruker xrf analyzer
Sort by
item image

1、Data readings,the KONNWEI KW600 12V car battery tester is able to effectively analyze and read important car data such as voltage, internal resistance, cold cranking amp and AH capacity, status of charge, status of health. 2、Accurate measurements,this professional automotive battery tester provides accurate results, calculates the cold cranking capability of the battery and the aging extent, allowing for a quicker, more precise car repairing. 3、Widely compatible,Beginner or expert, this car battery diagnostic tester can be used with a wide selection of 12V 100-2000 CCA regular flooded batteries, AGM flat plate, AGM spiral, as well as GEL batteries. 4、Extra features,the KW600 car battery tester displays test results in text and graphing, displaying the real-time battery voltage in wave form. With an intelligent 2.4in LCD screen and STM-32 main chip, reading access is practical and rapid! 5、Lifetime software update konnwei, KW600 unit provides Life-time free update service is supported by KONNWEI BTlink app with 3 years manufacture warranty. Just download the software from website in the manual, then follow on-screen instructions to go, very easy. If you have any problem, please feel free to contact us at the first time, our customer service has always been there to help, we promise to give the customer 100% satisfaction guarantee.

No shipping info
item image

ROCKETEK CSCR3 Type-C Smart CAC Card Reader IC ID SIM Bank Card Adapter for Laptop Android Phone [CAC USB Smart Card Reader] Used for CAC card,government ID,national ID,ActivClient,AKO,OWA,DKO,JKO,NKO,BOL,GKO,Marinenet,AF Portal,Pure Edge Viewer,ApproveIt,DCO,DTS,LPS,Disa corporate email,etc. [Certification Standard] The card reader supports ISO7816 A,B,C (5V/3V/1.8V) smart cards [General compatibility] The system is compatible with Windows (32/64 bit) XP/Vista/7/8/10,for Mac OS X and Android OS. Compatible with Android phones,for MacBook Pro 2018/2017/2016,for Mac Air,for Chromebook,for ASUS ZENBOOK,for DELL XPS,for Huawei Matebook and other Type-C laptops [Smart card detection] Motion detection with automatic shutdown function automatically detects the type of smart card short circuit and thermal protection System Compatibility: For Mac OS X(Insert a disk,close 'autorun' window firstly,then open file for 'MAC installer' to install) Windows (32/64bit) XP/Vista/7/8/10 Android OS Compatible Card: Support banks,post offices,chip cards issued all over the country Can be used for CAC (Common Access Card),Government ID,National ID For all contact smart card operations like online-banking or digital signature applications: ActivClient,AKO,OWA,DKO,JKO,NKO,BOL,GKO,Marinenet,AF Portal,Pure Edge Viewer,ApproveIt,DCO,DTS,LPS,Disa Enterprise Email,etc. Compatible with a wide variety of computer operating systems and smart card operations for digital authentication and security,Network ATM transfer,payment,balance inquiries,tax,water,electricity payment,credit card bill payment,cash card payment Please follow below steps(for Android smart phones user): 1. Download "ATR Analyzer" on Android APP market 2. Open the APP "ATR Analyzer" 3. Plug Rocketek card reader to your mobile phone and insert your CAC card 4. Easily read what you need Specification: Card types: 5V,3V and 1.8V Smart Cards,ISO 7816 Class A,B and C Certifications Standards: ISO-7816 and EMV2 2000 Level 1,CE,FCC,VCCI,CCID,for Microsoft WHQL Note: DOD and USG users note you will need a third-party CAC Enabler program. If you use it on for Mac OS and please make sure you know how to install JAVA and drive,JAVA is necessary on for Mac OS (If you don't know how to do it,please do not use this option.) SIM cards can be compatible with Windows only. Our card reader only serves as a bridge. (ROCKETEK provides card reader driver and the editable software of SIM card,but can't provide the smart card driver and editable software,like bank card/ID card. Because it depends on the raw materials or rules of your country and the bank. Package included: 1 x Card Reader 1 x SIM Card Adapter 1 x English User Manual Other items not included

No shipping info
item image

Language for Options: English, French, Dutch, Chinese, Japanese, Portuguese, German, Korean, Malaysian, Indonesia, Hungary ,Russian, Serbian, Slovak, , Romanian, Vietnamese, Thai, Spanish, Chinese, Polish, Netherlands, (Spanish ), (English ), (Chinese+English+) 3-in-1, etc. :For 10/8/7/XP/Vista Communication port:USB 3.0/2.0/1.1 Environment:humidity 10%-40%, temperature 5 to 40 Note:Some accessories are sent randomly and cannot be specified, which will not affect the use. Colour:As Shown Material:Metal+Plastic Package Contents: 1Set * Quantum Magnetic Health Analyzer Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

item image

[ 7 in 1 water quality tester]Professional measure pH, EC, TDS(ppm), ORP, CF, RH, Temp meter , The measurement units can be switched on the screen with one click. [Wifi Tuya APP Connected]Accurate real-time Wifi data mission and clear measured values make it easy for you to save, manage and share test data without worrying about data loss. [Multifunctional removable electrode]One electrode can measure 7 kinds of values:PH/ORP/EC/PPM/CF/humidity/temperature, Corrosion-resistant probe with rapid measurement response. [LCD Backlight Display]Multi-parameter display at the same time, LCD backlight display for clear reading, support night monitoring [Wide Applications]Apply in water sources, aquarium, hydroponics, laboratory, spas, swimming pools, and other water systems Noticed : Please keep the inst ent dry and keep the environment ventilated and dry when using. pH: 0.00 - 14.00pH EC: 0.00-20.00mS/cm CF: 0.1 - 199.9CF TDS: 0 - 9999ppm Temperature: 0.1°C-60.0°C,32.1°F-140.0°F ORP: -1200mV-+1200mV Humidit(air): 10%RH-99%RH Resolution pH: 0.01pH EC: 0.01mS/cm CF: 0.1CF TDS: 1ppm Temperature: 0.1°C/0.1°F ORP: 1mV Accuracy pH: ±0.5pH EC: ±2%F.S CF: ±2%F.S TDS: ±2%F.S Temperature: ±0.5°C ORP: ±5 mV ATC: 0.1℃-60.0℃ Working temperature: 0℃ - 50℃ (32℉ - 122℉) Voltage: AC100-240V/AC110V Plug Type: EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on. Plug Type: US Plug, it applies to Canada, India, Mexico, Thailand, Taiwan, the United States, the Philippines and so on. Due to different batches, there may be differences in product appearance, color, and printed text, which will not affect the use. Colour:Black Material:plastic Package Contents: 1 x Water Quality Analyzer Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

No shipping info
item image

BNC connector, suitable for most pH and controller BNC connectors Application: Suitable for a wide range of aquariums, hydroponics, laboratories and others Response time:less than equal 1min Operating temperature:0-60 Temperature (C):0-50 Connection form:Low-noise cable leads directly. Zero potentiometer (PH):71 PH range:0-14 error (mV):less than equal 15 Internal resistanceMohm(25):less than equal 250 Theoretical percentage slope%: equal 97 Terminal Blocks:BNC plug The repeatability (pH):less than equal 0.017 Tips:The product may be updated constantly, The Actual Product May Have Slight Differences Or Color Differences the color and appearance may be changed, please don't mind. And take a consideration before place the order if you have request for color or appearance. Colour:As Shown Material:Plastic Package Contents: 1 * Electrode Sensor Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

No shipping info
item image

Product Ancel BST100 battery tester is used for lead-acid starting battery, along with checking the following conditions of the battery, starting up, charging, and loading. With great design, easy operation, precise reading, complete functions, this tester supply the readings by a large LCD and hints by sound and light when testing. It utillizes 4-wire kelvin method to complete collection of a series of complicated data for calculating every testing data with build-in precise circuit and improved digital processor. moreover some circuit improvements including polar reversal protection, over voltage input protection, loose lead detection, ensure safety and convenience during testing. So this is the best tool in the fields of battery sales, vehicle repair and battery inspection in equipment system associated with lead-acid starting battery. ANCEL BST100 Function: 1.Identify battery status Good or Replace 2.Check Battery Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating. 3.Check Internal resistance value (Ohm) 4.Display battery life in percentage (%) 5.Battery Cranking Test, load test 6.Battery Charging Test, Ripple Test 7.Support battery ripple test and review test data BST100 12V Battery Tester Features: 1.Fast and smooth running speed with STM-32 chip set hardware 2.Accurate test results, using high precision amplifier and calibrated by professional battery testing tool, BST100 reading accuracy up to 99%. 3.Wide testing range cover from CCA 100- 2000 , 3- 220 AH, best in the market. 4.Industry initiative graphical battery voltage real time monitoring, can be analysis battery data more accurate. 5.Unique battery results display in percentage and meter mode. 6.Test all automotive cranking lead acid battery, including ordinary lead acid battery, AGM flat plate battery, AGM spiral battery, and Gel battery, etc. 7.Polarity reverse connection protection, reverse connection will not damage the tester or affect the vehicle and battery. 8.Directly test the battery with loss of electricity, no need to full charge before testing. 9.Testing standards include currently the world's majority of battery standards, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB. 10.BST100 is used to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL EPB cell BST100 Support Languages: English, French, German, Russian, Spanish, Italian

No shipping info
item image

7 in 1 multi-function tester: PH /EC /TDS /ORP /CF /Humidity /Temp. Seven functions, three functions can be used at the same time, Can connect to wifi, wired connection to computer monitoring, real-time data reception. Support APP remote control, more convenient to monitor the water quality detector anytime, anywhere. It is suitable for water quality testing in various occasions. The water quality analyzer can be used to distinguish drinking water from non-drinking water, and can test the water quality of drinking water, aquariums, hydroponics, swimming pools, ponds, laboratories, etc. HD LCD display,Large screen display, clear and easy to read values, suitable for testing needs in all walks of life Is Smart Device:YES Model Number:WIFI 7 in 1 Water Analyzer With Backlight Or Not:YES Display Type:DIGITAL pH Measuring range:0.00-14.00 pH Temp Measuring range:0-80°C (32.1°F-176°F) EC Measuring range:0.01-19.99mS/cm TDS Measuring range:0-9990ppm CF Measuring range:0.1-199.9CF ORP Measuring range:-999-+999mV umidity Measuring range:10%-99%RH Waterproof:IP67 Does not come with batteries, requires 3xAAA batteries The product appearance and printed words may vary depending on the batch, but this does not affect use Colour:As Shown Material:ABS Package Contents: 1 x Water Analyze Monitor Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

No shipping info
item image

1. Lower power supply noise, less noise when using harmonics; 2. Built-in 400mAh battery 3. Add a Micro-SD card to save the test data; 4. Add RTC support; 5. Modify the port names to Port1 and Port2 Measurement Frequency: 10KHz -1.5GHz RF Output: -13dbm (maximum -9dbm) Frequency Accuracy: Less than 0.5ppm Measurement Range: 70dB (50kHz-300MHz), 50dB (300M-600MHz), 40dB (600M-900MHz) enable extended firmware) Port SWR: Less than 1.1 Display: 2.8 inch TFT (320 x240) USB Interface: USB Type-C; Communications Mode: CDC (Serial) Power Supply: USB 5V 120mA, built-in 650mAh electricity, maximum charging current 0.8A Number of Calibration Points: 101 (Fixed) Number of Scanning Points: 101 (Fixed) Display : 4, Marking: 4, Save Setting : 5 Measuring S parameters, voltage standing wave ratio, phase, delay, Smith chart and the like Colour:black Material:Metal + Plastic Package Contents: 1 x NanoVNA host (including 2.8-inch touch screen, 400mAh battery) 2 x 20cm SMA male to male RG174 RF cable 1 x SMA female to female connector 1 x SMA Simple Calibration Kit SHORT 1 x SMA Simple Calibration Kit OPEN 1 x SMA Simple Calibration Kit LOAD 1 x USB Type-C data cable 1 x Touch pen 1 x Picks Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

No shipping info