The Desono C IC6 is a low profile, two way passive coaxial loudspeaker optimized for speech reproduction in conferencing applications. Designed with the installer in mind, the C IC6 loudspeaker supports audio connections via either standard category cable or traditional speaker cable. They can be blind mounted from below the ceiling, and feature a magnetic grille for easy toolless installation and removal. The grille plates are available in white, black, or red, or can be painted to match the room decor. The C IC6 also directly integrates with the Tesira AMP 450BP a four channel backpack PoE amplifier which reduces wiring requirements and installation time. The Desono C IC6 loudspeakers are an ideal choice for any conferencing space that demands superior speech reproduction.Certified for use with Zoom software. Low profile passive loudspeaker, less than 6 inches (155 mm) total depth Supports both CAT cables and standard speaker wiring Designed to be integrated with the AMP 450BP (backpack PoE amplifier) 8 ohm nominal impedance allows for daisy chaining Bridge mounted 1 inch soft dome tweeter 2 way 6.5 treated paper woofer, mechanically isolated and independent of tweeter 130 degree coverage optimized for low ceilings 60W with a peak power of 120W
AV Parts Master
Cat.6 extenders allow for cost effective, reliable extension of audio or video signals over longer distances that are not possible with passive cable or active repeater solutions. The Lindy 70m Cat.6 HDMI 4K30 IR Extender is a simple to use solution which lets the user extend HDMI signals up to 70m using a single low cost Cat.6 U UTP cable (not included). For added convenience, IR signals (20 60 kHz) can also be extended using the supplied IR receiver and emitter cables. Supporting 4K resolutions up to 3840x2160 30Hz 4:4:4 8bit, video content can be seen with incredible clarity at distances up to 70m, perfect for use in a variety of AV and digital signage applications in a range of settings including residential setups, education, business, retail and healthcare. This extender features an HDMI loop out port on the transmitter for local simultaneous viewing so that a local display can be connected for monitoring or to create an additional viewing zone. To ensure the maximum compatibility when two displays are connected, the EDID data, which determines the supported video and audio formats, can be copied from either the local display connected to the transmitter or the remote display connected to the receiver. Power over Cable (PoC) functionality enables the extender to operate from a single power supply connected to the transmitter, allowing the receiver to be located where there is limited access to mains power sockets, making it ideal for minimalist, discreet installations. In addition to PoC functionality the extender's slim design allow it to be easier to install in limited spaces behind flat screen monitors or TVs. Please Note: The quoted lengths and resolutions are possible with a direct connection between Transmitter and Receiver using good quality Cat.6 solid core cable. Using a different cable type, or introducing wall plates, couplers or patch panels will result in a reduction of possible distances.
AV Parts Master
The Lindy 100m Cat.6A HDMI 4K60, Audio, IR RS 232 HDBaseT KVM Extender is a complete end to end high performance, reliable solution for extending uncompressed HDMI signals over long distances via Cat.6 network cable. The following distance and resolution combinations are possible when using high quality Cat.6A or above U FTP solid core cable :100m: 3840x2160 60Hz 4:4:4 8bit 4:2:2 12bit Supporting resolutions up to 4K Ultra HD, video can be viewed in stunning clarity, while additional support for HDR (High Dynamic Range) allows content to be displayed with enhanced brightness, greater contrasts of blacks and whites and a much wider colour gamut. This provides a reliable solution for creating eye catching digital signage in retail, immersive displays at events or engaging setups in larger conference rooms or lectures halls. An HDMI loop out port on the transmitter allows an additional local display to be connected to the source side of the installation. ARC support over HDMI allows for audio content to be returned from the display to a connected amplifier or soundbar, while local audio extraction allows for the connection of audio outputs for immersive multi channel audio. Audio embedding or de embedding at the transmitter side can easily be switched via the push button on the main unit while it supports audio de embedding at the receiver side to connect an audio source. PoC (Power over Cable) functionality provides additional flexibility. This allows power to be supplied alongside data through Cat.6 network cable in a point to point connection between the transmitter and receiver, meaning only a single power supply is required at the transmitter unit. Ideal when power outlets are limited at the receiver end of the installation. USB 2.0 ports allow for mouse, keyboard, and other devices to be connected to both units to control a source device such as a PC or laptop from each side of the installation. Featuring bi directional IR ports at both sides of the setup, the source equipment can be easily controlled from the display side, and the display can also be controlled from the HDMI source side. Combined with CEC control, which allows commands from one main remote, this extension system allows for complete and simple control for the user. Bi directional RS 232 and Ethernet ports also allow for integration into larger control systems, or connection to network switches and hubs with LAN access. In addition, the power supply is connected via a screw type DC jack, providing a more secure and reliable connection, perfect for professional installations where accidental disconnections could create a major issue. HDBaseT is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable. To reach the best performances, U FTP solid core Cat.6A or Cat.7 cable is recommended for HDBaseT 3.0. Cat 6A U FTP is the recommended setting; the skewless nature and inter pair shielding of FTP provides the better near end crosstalk (NEXT, source end) and far end crosstalk (FEXT, receiver end) parameters required to achieve the maximum performance and distance. HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. Using a different cable type, introducing wall plates, couplers or patch panels will result in a reduction of possible distances.
AV Parts Master
The Lindy 70m Cat.6 HDMI 4K60, Audio, IR RS 232 HDBaseT Extender is a complete end to end high performance, reliable solution for extending HDMI signals over long distances via Cat.6 network cable. The following distance and resolution combinations are possible when using high quality Cat.6 U UTP or F UTP cable:70m: 3840x2160 60Hz 4:4:4 8bit 4:2:2 12bit Supporting resolutions up to 4K Ultra HD, video can be viewed in stunning clarity, while additional support for HDR (High Dynamic Range) allows content to be displayed with enhanced brightness, greater contrasts of blacks and whites and a much wider colour gamut. This provides a reliable solution for creating eye catching digital signage in retail, immersive displays at events or engaging setups in larger conference rooms or lectures halls. ARC support over HDMI allows for audio content to be returned from the display to a connected amplifier or soundbar, while local audio extraction allows for the connection of audio outputs for immersive multi channel audio. Digital audio embedding at the receiver side can also be used for source audio, which can easily be switching via the dip switch on the receiver unit. PoC (Power over Cable) functionality provides additional flexibility. This allows power to be supplied alongside data through Cat.6 network cable in a point to point connection between the transmitter and receiver, meaning only a single power supply is required at the transmitter or receiver unit. Ideal for example when power outlets are limited at the receiver end of the installation. Featuring bi directional IR ports at both sides of the setup, the source equipment can be easily controlled from the display side, and the display can also be controlled from the HDMI source side. This extension system allows for complete and simple control for the user providing also RS 232 port via terminal block. In addition, the power supply is connected via a screw type DC jack, providing a more secure and reliable connection, perfect for professional installations where accidental disconnections could create a major issue. HDBaseT is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable. HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. Please Note: the quoted lengths and resolutions are possible with a direct connection between Transmitter and Receiver using good quality Cat.6 or above cable. Using a different cable type, introducing couplers, wall plates or patch panels may result in a reduction of possible distances.
AV Parts Master
The Lindy Cat.6 USB Extender can be used to extend the distance between a USB device and a host computer by up to 50m. It consists of a local unit, which can be connected to the computer or laptop and a remote unit which connects to USB devices like storage devices, perfect for long distance access to files. Standard, low cost Cat.5e 6 cable (not included) is used to connect the two units together. For best performance and compatibility, we recommend the use of solid core patched cables. A power supply can be connected optionally for use with high current USB devices.
AV Parts Master
VGA extenders distribute analogue video content across longer distances into multiple locations, using standard network cabling. The Lindy 300m Cat.6 2 Port VGA Receiver is an ideal solution for distributing VGA signals to a single, or dual separate VGA display. Connected to the compatible transmitter (35403) via standard network cable, this receiver provides transmission of VGA signals up to 1920x1080, great for creating 4 separate distribution zones, such as classrooms or in security facilities. Dual VGA output ports allow for the connection of 2 separate VGA displays or projectors at the receiver side, useful when presenting information across multiple screens whether in monitoring and control, or smaller retail setups. 3.5mm dual mono audio connections also ensure speakers can be connected for supporting video content with high quality clear audio. EQ and gain controls, for sharpness and brightness, can be easily adjusted to ensure the optimum picture quality is always shown . The receiver has a robust metal housing with mounting brackets, providing additional protection against accidental damage, ideal for use in industrial installations.
AV Parts Master
The Lindy 500m Cat.6 3.5mm Analogue Audio Extender is a compact solution for extending stereo audio signals to much longer distances over easily accessible network cable. With a compact pigtail style design and no requirement for additional power, the extender provides a minimalistic extension solution that can be discreetly installed alongside source devices and analogue speakers. The transceiver units provide seamless interoperability, allowing for use of either unit at any side of the setup.
AV Parts Master
The Lindy 50m USB 2.0 Cat.6 Extender can be used to extend the distance between a USB peripheral device and host computer by up to 50m. It consists of a local unit which connects to the computer and a remote unit that connects to the device. Standard, low cost Cat.5e 6 network cable (not included) is then used to bridge the connection between the two units.For best performance and compatibility, we recommend the use of solid core patched cables. The included power supply ensures secure and uninterrupted electricity supplies.
AV Parts Master