The Lindy DisplayPort 1.4 EDID Emulator Adapter is designed for systems that require an uninterrupted signal to overcome EDID related issues that commonly occur when using AV equipment such KVM's, Extenders, Splitters Switches. The Emulator also features LED indicators to ensure a quick simple installation process and with support for resolutions up to 7620x4320 30Hz or 3840x2160 144Hz HDR (Via cloning), HDCP 2.2 DPCP 2.0 pass through, this emulator is perfect for use with Ultra HD 4K monitors, Displays and source equipment. A headless EDID adapter enables a simulated connection on the video source device without requiring an actual monitor to be connected. With the small scale and minimalistic design, this is a handy connectivity solution for both AV and IT installers to ensure legacy and new DP equipment works seamlessly with no compromise on performance. This adapter can be used to quickly and easily clone the EDID data from the DP display so that the graphics card has direct access to the correct data from the display, the cloning process takes less than 10 seconds; Alternatively the EDID Emulator is configured with a preset EDID which uses the most common resolutions timing combinations. Please see the technical information section for a full breakdown. Note: When EDID emulator is in headless mode rebooting restarting will cause the resolution to default to 3840x2160 60Hz, 4:2:2, 8 bit.
AV Parts Master
The Lindy DisplayPort 1.2 to HDMI Converter is ideal for connecting a DisplayPort equipped source such as a PC or laptop to an HDMI monitor or TV. It supports resolutions up to 4K 3840x2160 30Hz and allows audio pass through if supported by the video source. The converter can also be used to add another display to extend the available desktop workspace and increase productivity. It is also ideally suited for travelling due to its compact, lightweight form factor and convenient Plug Play installation. This Converter requires the source or graphics card to support DP to provide dual mode signals.
AV Parts Master
This VGA Extender transmits VGA and audio signals through CAT5e network cables over distances of up to 300m when using high quality solid core network cable. Easy to install the Extender system is made up of local transmitter and remote receiver units that are connected together with CAT5e cable (not included), high quality solid core installation cable is recommended. The local transmitter unit connects to the computer system's VGA port, with a VGA output available to connect a local monitor, while the receiver unit connects to your remote monitor or projector. The extender includes both Gain and Skew controls to allow you to adjust the brightness and sharpness of the picture according to your requirement. An optional skew compensation unit (like Lindy No. 32766) can be used to correct colour shadows on the display caused by different lengths of RGB signal transmission over the twisted pairs in the Cat.5e cable. Both Extender units are housed in sturdy metal casings, making them ideally suited to use in factories and other industrial applications. Please note: Maximum supported distances and resolutions are dependent on both the monitor and the chipset used in the graphics card.
AV Parts Master
With this Extender you can use up to 70m of high quality inexpensive Cat.5e 6 cable to connect a DVI source to a DVI display device. The slim RJ45 connectors and Cat.6 cable (not included) allow greater flexibility not possible with larger DVI connectors and cables. Normal operation will not require external power; however the Transmitter unit allows external power to be attached in cases where the graphics card does not provide sufficient power, either using a USB Micro B Cable or an external power supply connected to the supplied USB to DC cable. The Extender supports the following resolutions distance combinations: 800x600 70m 1024x768 65m 1280x1024 up to 1920x1200 50m Additional Requirements: RJ 45 patch cable: 1 x CAT5e 6 UTP Cable Package Contents Transmitter and Receiver Units Lindy Manual
AV Parts Master
Our premium quality compatible projector lamps offer excellent performance at an affordable price. For many years compatible projector lamps were poor quality and not worth the effort, and this is still often the case; but not with our compatible lamp range. Our compatible projector lamps are made to exacting specifications in conjunction with world class optoelectronic manufacturers, we employ stringent design and manufacturing processes to ensure the highest level of quality possible. These first rate manufacturing processes closely mirrors that of the original projector manufacturers. All compatible lamps are covered by a no quibble 120 day warranty.
AV Parts Master
What This Product DoesThe T1500 28PCT provides 24 10 100Mbps ports that supports 802.3at af compliant PoE, with a total PoE power supply up to 180W, powerful and flexible enough for users to deploy wireless access points or IP based network surveillance cameras. The switch also comes equipped with 4 10 100 1000Mbps RJ45 ports and 2 combo SFP slots, expanding your network flexibly. In addition, it provides high performance, enterprise level QoS, useful security strategies and rich layer 2 management features. TP LINK Smart PoE Switch T1500 28PCT is a cost effective product solution for the small and medium business. T1500 28PCT has useful security features. The Storm Control feature protects against Broadcast, Multicast and Unknown unicast Storm. Quality of Service (QoS, L2 to L4) provides enhanced traffic management capabilities to move your data smoother and faster. Anymore, the easy to use web management interfaces, along with SNMP and RMON, mean faster setup and configuration with less downtime. For workgroup and departments requiring cost sensitive layer 2 switch, TP LINK smart PoE switch T1500 28PCT provides you the ideal access edge solution.IEEE 802.3at af compliant Power over EthernetThe T1500 28PCT supports 24 ports of IEEE 802.3at af compliant PoE and has a total power supply of 180W to power any 802.3at or 802.3af compliant power device. It s an efficient and cost effective choice to work with wireless access points, surveillance cameras, IP phones and other PoE supported devices, while getting rid of cables or power lines running around. Compact and flexible, the T1500 28PCT is ideal to flexibly use PoE to deploy wireless access points or IP based network surveillance cameras for projects or small business networks.Advanced QoS featuresTo integrate voice, data and video service on one network, the switch applies rich QoS policies. Administrator can designate the priority of the traffic based on a variety of means including Port Priority, 802.1P Priority and DSCP Priority, to ensure that voice and video are always clear, smooth and jitter free. In conjunction with the Voice VLAN the switch supports, the voice applications will operate with much smoother performance.Abundant Layer 2 featuresFor more application of layer 2 switches, T1500 28PCT supports a complete lineup of layer 2 features, including 802.1Q tag VLAN, Port Isolation, Port Mirroring, STP RSTP MSTP, Link Aggregation Group and 802.3x Flow Control function. Any more, the switches provide advanced features for network maintenance such as Loop Back Detection, Cable Diagnostics and IGMP Snooping. IGMP snooping ensures the switch intelligently forward the multicast stream only to the appropriate subscribers while IGMP throttling filtering restrict each subscriber on a port level to prevent unauthorized multicast access.Enterprise Level Management FeaturesT1500 28PCT is easy to use and manage. It supports various user friendly standard management features, such as intuitive web based Graphical User Interface (GUI) or SNMP (v1 2 3) and RMON support enables the switch to be polled for valuable status information and send traps on abnormal events. Specifications Management features Multicast support Yes Switch type Managed Web based management Yes Quality of Service (QoS) support Yes Switch layer L2 Ports interfaces Copper ethernet cabling technology 10BASE T, 100BASE TX, 1000BASE T Basic switching RJ 45 Ethernet ports quantity 24 Basic switching RJ 45 Ethernet ports type Fast Ethernet (10 100) Combo SFP ports quantity 2 Gigabit Ethernet (copper) ports quantity 4 Fast Ethernet (copper) ports quantity 24 Network IGMP snooping Yes Cable types supported Cat5, Cat5e Copper ethernet cabling technology 10BASE T, 100BASE TX, 1000BASE T Networking standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x VLAN support Yes Spanning tree protocol Yes Port mirroring Yes Number of VLANs 512 Link aggregation Yes Flow control support Yes Broadcast storm control Yes Auto MDI MDI X Yes 10G support No Virtual LAN features VLAN support Yes Number of VLANs 512 Data transmission Number of VLANs 512 Throughput 9.5 Mpps MAC address table 8000 entries Switching capacity 12.8 Gbit s Number of queues 4 Jumbo frames support Yes Technical details Form factor 1U Product colour Black Firmware upgradeable Yes Rack mounting Yes Security SSH SSL support Yes Security algorithms SSH, SSH 2, SSL TLS IGMP snooping Yes Access Control List (ACL) Yes Multicast features Multicast support Yes Protocols Management protocols SNMP v1 v2c v3, RMON, SNTP, TFTP Certificates Certification CE, FCC, RoHS Design Form factor 1U Product colour Black Certification CE, FCC, RoHS Rack mounting Yes Number of fans 2 fan(s) Performance Firmware upgradeable Yes Compatible operating systems Microsoft Windows XP, Vista, Windows 7, Windows 8, MAC OS, NetWare, UNIX, Linux Harmonized System (HS) code 85176990 System requirements Compatible operating systems Microsoft Windows XP, Vista, Windows 7, Windows 8, MAC OS, NetWare, UNIX, Linux Power AC input voltage 100 240 V AC input frequency 50 60 Hz Power consumption (typical) 222.15 W Power over Ethernet (PoE) Power over Ethernet plus (PoE ) ports quantity 24 Total Power over Ethernet (PoE) budget 180 W Power over Ethernet (PoE) Yes Operational conditions Storage temperature (T T) 40 70 C Storage relative humidity (H H) 5 90 Operating temperature (T T) 0 40 C Operating relative humidity (H H) 10 90 Weight dimensions Width 440 mm Depth 220 mm Height 44 mm Packaging data Quick start guide Yes Cables included AC Logistics data Harmonized System (HS) code 85176990 Packaging content Quick start guide Yes Cables included AC
AV Parts Master
zioxi Chromebook Charging Cabinet A compact, robust desk top Chromebook charging cabinet that can accommodate 10 Chromebooks, laptops and tablet computers with up to 14 screens. Available with or without a lockable door and with the option of a digital code, RFID card fob or key lock. Separate USB C power module or AC charger and cable storage with only a short length of power cable presented to each shelf. Chromebook Charging Cabinet for small laptops large tablets Key features: Compact, simple unobtrusive charging cabinet design Charging using the manufacturer supplied AC adapters, all stored in a separate and secured electrical compartment Option of intelligent and integrated USB C PD specification power module supporting 5V, 9V, 12V, 15V 20V device charging at upto 45W per device Cable management with only a short length of DC power cable presented at the front of each shelf so cables are all neat tidy, very simple to connect and can t go missing Choice of digital code, RFID card or key locks. Digital code and RFID card locks supplied with master key override. Doors fold back 270 degrees preventing damage and allowing easy access Smooth, easy clean surfaces Also available in 16, 20 or 32 bay floor standing, static Chromebook charging station capacities. Finish White melamine faced MDF carcase and doors, compact laminate top, extruded shelves, metal electric compartment cover in dark grey. AC Charger Power option Requires 1 power socket (UK, EU and others) per cabinet. Supports device AC plugtop brick style power adapters which are stored in the separate electrical bay. UK and EU plug formats supported, others by request. Supplied with 10 mains sockets inside the electrical bay. (Individual device AC power adapters cables are required but not included. We recommend the use of manufacturer supplied power adapters). Integrated Laptop USB C Power option Integrated USB type C power system housed in the front accessible electrical side bay. Requires 1 power socket (UK, EU and others on request) per cabinet. USB Type C ports support the Power Delivery (PD3.0) specification with voltage maximum current combinations of 5V, 9V, 12V, 15V and 20V so suitable for charging all types of Type C enabled devices including laptops, Chromebooks, tablets and phones at upto 45W per port. Supplied with 10 USB C ports. (Individual device USB C cables are required but not included). Warranty 5 years (2 years for electrics)
AV Parts Master
zioxi Chromebook Charging Cabinet A compact, robust desk top Chromebook charging cabinet that can accommodate 10 Chromebooks, laptops and tablet computers with up to 14 screens. Available with or without a lockable door and with the option of a digital code, RFID card fob or key lock. Separate USB C power module or AC charger and cable storage with only a short length of power cable presented to each shelf. Chromebook Charging Cabinet for small laptops large tablets Key features: Compact, simple unobtrusive charging cabinet design Charging using the manufacturer supplied AC adapters, all stored in a separate and secured electrical compartment Option of intelligent and integrated USB C PD specification power module supporting 5V, 9V, 12V, 15V 20V device charging at upto 45W per device Cable management with only a short length of DC power cable presented at the front of each shelf so cables are all neat tidy, very simple to connect and can t go missing Choice of digital code, RFID card or key locks. Digital code and RFID card locks supplied with master key override. Doors fold back 270 degrees preventing damage and allowing easy access Smooth, easy clean surfaces Also available in 16, 20 or 32 bay floor standing, static Chromebook charging station capacities. Finish White melamine faced MDF carcase and doors, compact laminate top, extruded shelves, metal electric compartment cover in dark grey. AC Charger Power option Requires 1 power socket (UK, EU and others) per cabinet. Supports device AC plugtop brick style power adapters which are stored in the separate electrical bay. UK and EU plug formats supported, others by request. Supplied with 10 mains sockets inside the electrical bay. (Individual device AC power adapters cables are required but not included. We recommend the use of manufacturer supplied power adapters). Integrated Laptop USB C Power option Integrated USB type C power system housed in the front accessible electrical side bay. Requires 1 power socket (UK, EU and others on request) per cabinet. USB Type C ports support the Power Delivery (PD3.0) specification with voltage maximum current combinations of 5V, 9V, 12V, 15V and 20V so suitable for charging all types of Type C enabled devices including laptops, Chromebooks, tablets and phones at upto 45W per port. Supplied with 10 USB C ports. (Individual device USB C cables are required but not included). Warranty 5 years (2 years for electrics)
AV Parts Master