Cat.6 U UTP PVC network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase T. Cat.6 cable for operating frequencies up to 250MHz. The unshielded version (U UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameters (NExT, FExT, etc.) despite the lack of shielding. These cables are manufactured and tested according to the ISO IEC 11801 specification. The cables are packaged individually in a polybag. The gold plated contacts ensure reliable, corrosion free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
AV Parts Master
From the Lines cable connectivity concept developed by Lindy, Gold Line Ultra High Speed HDMI cables are the no compromise, high performance connection solution for use in the most demanding professional environments. Gold Line Ultra High Speed HDMI cables feature triple shielded construction with 26AWG OFC conductors for premium performance and corrosion resistance. High quality 24K gold plated contacts and connectors maintain optimal signal integrity and maximum reliability. Resolutions up to 10K 10240x4320 120Hz 4:2:0 12bit are supported. Gold Line HDMI cables are also capable of transmitting high bit rate 32 channel audio and Dolby Atmos. These superior quality cables utilise a unique low attenuation design that ensures consistent and reliable transmission even over very long distances. The HDMI 2.1 specification is supported for 48G bandwidth capacity in cable lengths up to 5m. Ultra High Speed Gold Line HDMI cables are available in lengths from 1m to 5m. HDMI 2.1 Specification cables now support the following features: Higher Resolutions Now up to 10k 120Hz resolution with DSC, 8k120Hz without ALLM automatic low latency mode Made for Gamers, helps cut down the lag by removing advanced video processing providing the quickest response from your display. VRR Synchronises the source and displays refresh rate, this helps remove judder and image tearing. Dynamic HDR Instructed by the source a connected display can alter the HDR metadata on a scene by scene, or even frame by frame basis providing the best colour range at any time. DSC A high performance compression algorithm drastically reducing the signal bandwidth needed for super high resolutions. eARC An advanced version of ARC, using Object based audio which now provides uncompressed 7.1ch and 5.1ch and up to 192Khz, 24bit for Dolby Atmos and DTS:X
AV Parts Master
Cat.6 U UTP PVC network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase T. Cat.6 cable for operating frequencies up to 250MHz. The unshielded version (U UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameters (NExT, FExT, etc.) despite the lack of shielding. These cables are manufactured and tested according to the ISO IEC 11801 specification. The cables are packaged individually in a polybag. The gold plated contacts ensure reliable, corrosion free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
AV Parts Master
From the Lines cable connectivity concept developed by Lindy, Anthra Line HDMI cables are the professional choice for high performance connections in commercial AV and IT installations. Anthra Line HDMI cables are premium connections that feature triple shielded with 28AWG copper conductors for performance and corrosion resistance. High quality gold plated contacts and connectors maintain optimal signal integrity and maximum reliability. UHD resolutions up to 4K 4096x2160 60Hz 4:4:4 8bit are supported. Anthra Line HDMI cables are also capable of transmitting 32 channel audio and Dolby True HD. These HDMI 2.0 cables support 18Gbps bandwidth capacity in cable lengths from 0.5m up to 3m.
AV Parts Master
Cat.6 U UTP PVC network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase T. Cat.6 cable for operating frequencies up to 250MHz. The unshielded version (U UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameters (NExT, FExT, etc.) despite the lack of shielding. These cables are manufactured and tested according to the ISO IEC 11801 specification. The cables are packaged individually in a polybag. The gold plated contacts ensure reliable, corrosion free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
AV Parts Master
Cat.7 S FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase T. The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single wire shielding (S FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO IEC 11801 specification. The cables are packaged individually in a polybag. The gold plated contacts ensure reliable, corrosion free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: Cat.6A S FTP patch cords with 600MHz raw cable .
AV Parts Master
Cat.6A S FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase T. Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz. These cables are manufactured and tested according to the ISO IEC 11801 specification. The cables are packaged individually in a polybag. The gold plated contacts ensure reliable, corrosion free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The halogen free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
AV Parts Master
The Lindy IPower Switch Classic 8 is a power management solution which connects to an existing network infrastructure to provide convenient remote control power management from anywhere in the world with an internet connection. System administrators can control the power of multiple servers, workstations, hubs, router etc. allowing reboot and power on and off functions, via a simple to use browser interface or software control. Each outlet has its own status indication LED and the display shows the current IP address of the unit directly. Power consumption charts for daily, monthly or a user defined period are available. This unit has an IEC 320 C19 mains power input connector capable of operating from a 16A circuit. The suggested power cable is a standard mains plug fused at 13A. If you intend to connect the unit to a 16A circuit, then please ensure you use an appropriate Commando style plug to IEC 320 C19 power cable rated at 16A. Note that SSL is not supported. This unit has an IEC 320 C19 mains power input connector capable of operating from a 16A circuit. The suggested power cable is a standard Mains plug fused at 13A. If you intend to connect the unit to a 16A circuit then please ensure you use an appropriate Commando style plug to IEC 320 C19 power cable rated at 16A. Please note: This product is not supplied with the mains power cable. These are available from Lindy using part number 30459 (UK Mains to IEC C19) or 30109 (Commando to IEC C19).
AV Parts Master