AD8232 is an integrated front-end suitable for signal conditioning of cardiac bioelectrical signals for heart rate monitoring. An integrated signal conditioning module for ECG and other bioelectrical measurement applications. The device is designed to extract, amplify, and filter weak bioelectrical signals in the presence of noise from motion or remote electrode placement. The design allows an ultra-low-power analog-to-digital converter (ADC) or embedded microcontroller to easily capture the output signal. The AD8232 uses a two-pole high-pass filter to eliminate motion artifacts and electrode half-cell potentials. The filter is tightly coupled to the inst entation amplifier structure to achieve single-stage high-gain and high-pass filtering, saving space and cost. The AD8232 uses an unconstrained op amp to create a three-pole low-pass filter that eliminates additional noise. Users can select the cutoff frequencies of all filters to meet the needs of different types of applications. To improve common-mode rejection of system line frequencies and other undesirable interference, the AD8232 includes an amplifier for driven lead applications such as right-side drive (RLD). The AD8232 includes a fast recovery feature that reduces the long settling tail of high-pass filters. If there is a signal change in the amplifier rail voltage (such as a lead disconnection condition), the AD8232 will automatically adjust to a higher filter cutoff state. This feature allows the AD8232 to achieve fast recovery, so that valid measurement values can be obtained as soon as possible after the leads are connected to the electrodes of the measurement object. The rated temperature range for guaranteed performance is 0 ℃ to 70 ℃, and the operating temperature range is -40 ℃ to +85 ℃. material: plastic Color as shown Package Contents: 1 x Development board 1 x line Only the above package content, other products a
Fruugo United Kingdom
Attaches directly to risers. For use with pull-back risers only. Riser Mounts from Dakota Digital. Riser Mount for HLY-50xx, HLY-6000, MCV-7000, and MCL-5000 series gauges. We do not tend to wash parts, so expect your parts may be dirty as they are used motorbike parts.
eBay
Advanced Sensing Technology: Equipped with a high-grade CMOS SHT30 sensor, our RS485 temperature and humidity mitter ensures reliable and accurate measurements in environments ranging from -40℃ to 125℃ for temperature, and 5% to 95%RH for humidity. Its robust build makes it dust, rain, and snow resistant. RS485 Modbus Protocol Compatibility: This sensor features an RS485 output, supporting the widely used Modbus-RTU protocol, which enhances mission stability over distances up to 1200 meters. It simplifies installation with its wall-mounted design and operates efficiently with a power supply ranging from DC 5 to 36V. Precision Measurement: Enjoy exceptional accuracy with temperature readings precise to ±0.3°C within the 0 to 60°C range and ±0.5°C outside this range. Humidity accuracy is maintained at ±2% within the 10 to 90%RH range and ±5% outside of it. Regular data collection is performed every 10 seconds. User-Friendly Configuration: Configuration is straightforward via DIP switches that allow address settings, aiding in easy identification and integration of multiple sensors. The system ensures high long-term stability and strong anti-interference capabilities. Practical Design and Applications: Featuring a large LCD display for real-time monitoring, this digital temperature and humidity mitter with an IP54 waterproof rating is perfect for various uses including industrial sites, HVAC systems, agriculture, and storage areas like warehouses and greenhouses. Colour:Gray Material:Plastic Package Contents: 1x RS485 Temperature Humidity Sensor Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Includes an adjustable speedometer, bar-type tachometer, voltmeter, cylinder temp (when available), odometer with two trip meters, service meter and hour meter and low fuel indicators Displays automatically dims for comfortable nighttime riding and brightens to a high-contrast mode for excellent visibility, even in direct sunlight Local pickups are welcome! Please contact us to make sure your order is available for local pickup as some items are stored in and ship from fulfillment centers. Our store is open 10:00am - 6:00 pm eastern time Monday through Friday and located at 905 Mulberry St, Loudon, TN 37774 All returned items must be in original, non-modified, undamaged packaging. We will not accept returns with damaged, modified (including writing or marks) or missing packaging. It will.
eBay
Direct Connection via CD changer Port with CD quality sound,Control music files from your car radio panel or steering wheel.Support USB Flash, SD Card and 3.5mm jack input.Building in high quality MP3/WMA decoder,Building in Amplifier chips,No signal interfere, No battery required,Smart design and Easy to install and use,Brand New and High Quality Work Theory: 1. Turn off car engine and remove key from ignition. 2. Remove car radio from the dash in order to get assess to the back of radio. 3. Find CD Changer port and plug Car Mp3 Interface cable connector into it, make sure firm connection. 4. Plug USB stick or SD card into Car Mp3 Interface. Turn on radio and press CD (Disc/model/CDC/AUX) button until "CD-X-X" appear on radio screen. And play music to check left and right sound. And test if can control radio track +/-,Disk +/-. 5. After all test are ok, assembly radio and put Car MP3 Interface in the proper place. Item type: Cables, adapters & socketsVoltage input: DC 12V;Signal-to-noise: 95DB Max. current: 600mA;Frequency response: 20HZ-20KHZ;Working temperature: -10-80 Celsius degree;Total Harmonic Distortion: 0.01% colour: Black + yellow Material: PVC+copper Car Compatible with: ( it is 6+6PIN interface) NOTE: Please check the product of all compatible with the range, and then buy the product. If you can not determine whether your car is compatible. Please contact our customer service. If your car does not fit the above compatibility, please do not buy. Otherwise it will not work. For Toyota: 4Runner 2003-2011 Camry 2005-2011 Tundra 2004-2011 Venza 2009-2011 Celica 2003-2005 Corolla 2005-2011 FJ Cruiser 2007-2010 Highlander 2004-2011 Land Cruiser 2003-2011 Matrix 2005-2011 Mark X 2005-2011 MR2 2004-2010 Vitz 2006-2010 Yaris 2006-201 FOR Lexus ES 300/330 2004-2011, IS 220/250/300/350 2006-2011 GS 300/400/430/450H 200
Fruugo United Kingdom
The MLX-2011 has the ability to display oil pressure and oil temperature information with installation of sensors available separately. Additionally, MBM expansion modules are available to add air pressure, boost and compass heading readouts to the message center. Choose from a black or chrome bezel to start, then dig into the 31 illumination colors; independently select colors for speed reading, message center information, bar-graph readouts and gauge labels, or choose from 12 preset themes! Please note: Images are a representation of the item only. Actual item may differ. Some images will show accessories or parts that are NOT included with this listing. Please read the listing title, description and Manufacturer Part Number carefully. When in doubt, simply ask us before making the purch.
eBay
Integrated one piece Ballast, simplified wiring which eliminates any unnecessary confusion during install. This ballast will give out more consistant output, meaning color will be more even and accurate. Ballast with aluminum case: waterproof, anti-shock and low-voltage protection. Plug & play: easy to install and no modification required. As high as 55W power supply, the item greatly reduces vehicle power system load and can save power loss up to 50%. Easy to install, the item is an optimum tool for you. Car Model: for A4, for A6, for Accent, for Accord, for Astra, for Asx, for Camry, for Civic, for Corolla, for Cruze etc. Specifications: Output Power: 55W Input voltage: 9-16V Input current: 10A max. Working voltage: 12V Working current: 4.2A Operating temperature: -40~105 Centigrade material: plastic Package includes:1 x Ballast Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
The MLX-2011 has the ability to display oil pressure and oil temperature information with installation of sensors available separately. Additionally, MBM expansion modules are available to add air pressure, boost and compass heading readouts to the message center. Choose from a black or chrome bezel to start, then dig into the 31 illumination colors; independently select colors for speed reading, message center information, bar-graph readouts and gauge labels, or choose from 12 preset themes! Please note: Images are a representation of the item only. Actual item may differ. Some images will show accessories or parts that are NOT included with this listing. Please read the listing title, description and Manufacturer Part Number carefully. When in doubt, simply ask us before making the purch.
eBay
This product is suitable for inflation, deflation, pressure measurement and adjustment of air (cuff) bags of tracheal intubation, tracheostomy intubation, double-lumen bronchial intubation, laryngeal mask and other products Feature:Medical Grade Type:Pressure Gauges Colour:White Material:Plastic The actual product may have slight color difference or difference, which will not affect the use Package Contents: 2 x Tracheal Intubation Balloon Pressure Gauge Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Local pickups are welcome! Please contact us to make sure your order is available for local pickup as some items are stored in and ship from fulfillment centers. Our store is open 10:00am - 6:00 pm eastern time Monday through Friday and located at 905 Mulberry St, Loudon, TN 37774 Got questions? click the contact seller link at top of this page or give us a call toll free. We must be notified within 24 hours of receipt of any missing, defective or damaged goods. All returned items must be in original, non-modified, undamaged packaging. We will not accept returns with damaged, modified (including writing or marks) or missing packaging. Any item which has been used, worn, damaged or had tags/labels removed will not be eligible for return. It will be the sole discretion of oemcycle to provi.
eBay
Silent Non-Ticking Mechanism: Equipped with a precise quartz sweep movement, this clock ensures accurate timekeeping and a completely quiet environment. Ideal for spaces like bedrooms, classrooms, and meeting rooms where silence is golden. The classic design complements any decor. Versatile LCD Display: Not only does it show the time, but also the day of the week and indoor temperature in either Fahrenheit or Celsius. Easily switch between temperature units with a simple press of the UP key, making it a practical choice for a variety of settings. Clear and Easy to Read: Featuring large black numbers against a contrasting background, the clock offers a clear view thanks to its front glass cover which also protects against dust. Perfect for ensuring time is easily readable from a distance. Battery Operated Convenience: Operates with 1xAA carbon battery and 1xAAA battery (not included), ensuring continuous performance without the need for electrical outlets. Simple Installation: This clock is designed to be hung effortlessly, coming equipped with a hook and a wide slot on the back for easy mounting. Ideal for anyone looking for a hassle-free setup in homes, schools, or offices. The color of different production batches may be different but will not affect the use Colour:Blue Material:plastic Package Contents: 1 x Alarm clock Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Includes an adjustable speedometer, bar-type tachometer, voltmeter, cylinder temp (when available), odometer with two trip meters, service meter and hour meter and low fuel indicators Displays automatically dims for comfortable nighttime riding and brightens to a high-contrast mode for excellent visibility, even in direct sunlight Local pickups are welcome! Please contact us to make sure your order is available for local pickup as some items are stored in and ship from fulfillment centers. Our store is open 10:00am - 6:00 pm eastern time Monday through Friday and located at 905 Mulberry St, Loudon, TN 37774 All returned items must be in original, non-modified, undamaged packaging. We will not accept returns with damaged, modified (including writing or marks) or missing packaging. It will.
eBay
Capacitor category: aluminum electric capacitor structure: fixed capacitor [Volume]:231 x 35 x 65mm Material: plastic + metal Color as shown [Tone] 7mm The product can be used in electrical devices such as RAM, three integral meters, motor drive, clock circuit, toy, CMOS shutdown protection, digital camera, PDA flashlight and other fields, such as backup power supply. Package Contents: 1 x Super Farad capacitor Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
This includes Republic Of Ireland. We will accept your request at our earliest opportunity.
eBay
1. Non-woven Fabric electrode Pads 2. Self Adhesive, Re-usable, Long Life 3. Bio-compatible, Dry out Resisting 4. Lower Impedance, More uniform current distribution, 5. No hot spots, more stimulation comfort. Suitable for various medium frequency electronic physiotherapy machine. Help to improve blood circulation, promote metabolism and eliminate fatigue. Self adhesive, high adhesive, convenient to use and reusable. Useful and safe accessory for care. Durable construction: can even pull out from the lead wire without damage. unlike others, not plastic Specially designed holes, on each pad, to release the generated heat and give more comfort and less irritation. Fit 3.5mm plug. Colour:White Material:Non-woven + hydrogel Size:about 3 x 4cm Package Contents: 20 x Electrode Pads Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
We will accept your request at our earliest opportunity.
eBay