1This is a professional print head that is compatible with a wide range of models 2This print head is smooth and stable, and the color is natural. It is a worthy print replacement that you deserve 3High quality ink with high degree of reduction and sufficient ink to save your cost 4The nozzle is polished, no paper jam, and the printing process is smooth 5All use Bayer raw materials from Germany, the quality is guaranteedFeatures: 1. This is a professional print head that is compatible with a wide range of models. 2. This print head is smooth and stable, and the color is natural. It is a worthy print replacement that you deserve. 3. High quality ink with high degree of reduction and sufficient ink to save your cost. 4. The nozzle is polished, no paper jam, and the printing process is smooth. 5. All use Bayer raw materials from Germany, the quality is guaranteed. Specification: Color: Black / Yellow, Magenta / Cyan,CMYK (Optional) Applicable models: forHP Officejet Pro8000/8500/8500A Printhead Size: Approx. 94 x 57 x 20 mm / 3.7 x 2.2 x 0.8in Weight: approx. 80-160g Package List: 2 x Print Head Note: Please remove the polishing cardboard nozzle and remove the orange rubber plug before installation. Instructions: After receiving the product, remove the nozzle from the package. Before disassembling the protective device, shake the nozzle continuously to the left and right according to the figure to achieve the best use effect to achieve the best use effect. Then remove the protective device (orange with the outwardly turned handle). In order to avoid the internal inverted buckle of the protective device from damaging the circuit of the print head and causing the print head to fail to operate, pay attention to push the handle out as hard as possible. Then pull the reminder label together with the sealing blue tape to tear off. Finally, pull out the protective plug of the ink supply needle (the orange belt, please shake the nozzle arrow left and right before opening the protective clip). Installation steps:First take out the two old print heads, close the cover and turn on the printer power normally. After the print head indicator on the machine flashes, open the cover. At this time, the print head carriage (carriage) in the machine will move to the left of the machine. After it stops, install the two nozzles one by one and close the machine cover. The machine will perform calibration and print a test page. Some models will prompt "calibration failed" or "calibration failed" (this is a technical obstacle set by the original co
Fruugo United Kingdom
Type: 240-Pin DDR2Capacity: 4GBSpeed: PC2-6400 800 MHzVoltage: 1.8VBuffering/Ecc: Non-ECC UnbufferedColour: greenMaterial: PCB+metalPackage Contents:4 x 4GB PC2-6400 800mhz Desktop memorysBuyers note:It is generally difficult for processors suitable for DDR2 to support 16GB and 800mhz at the same time.Only fit for AMD CPU Motherboard, it can not fit for any intel cpu motherboard.Not work on All for Intel CPU G41 P43 P45 H55 H61 H67 B75 Z77 intel chipset motherboards.Not work with All for ,,,,,Gateway,Acer.,,Packbell Computers.different batches, slightly different products, does not affect the useOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Features: Enjoy a comfortable and shaded outdoor area with this set of RVs awning accessories. Made with durable nylon plastic, these accessories are designed to securely attach to your RVs awning, providing stability and reliability. Perfect for RVs enthusiasts who love outdoor travel and camping, offering a convenient way to create a shaded space and easy installation. Whether you're camping, taking a trip, or hosting outdoor gatherings, these accessories provide a cool and shaded area for relaxation and enjoyment. Elevates your RVs experience with this versatile and user friendly set of awning accessories, ensuring comfort and convenience wherever you go. Specifications: Material: Nylon Size: As Shown Note: Please allow 1-2cm errors due to manual measurement, make sure that you do not mind before you order. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Package includes: 1 Set Awning Arm Slider Catch Kit
Fruugo United Kingdom
Features:1. This is a professional print head that is compatible with a wide range of models.2. This print head is smoothand stable, and the color is natural. It is a worthy print replacement that you deserve.3. High quality ink with high degree of reduction and sufficient ink to save your cost.4. The nozzle is polished, no paper jam, and the printing process is smooth.5. All use Bayer rawmaterials from Germany, the quality is guaranteed.Specification:Color: Black / Yellow, Magenta / Cyan, CMYK (Optional)Applicable models:for HP Officejet Pro8000/8500/8500A PrintheadSize: Approx. 94 x 57 x 20 mm / 3.7 x 2.2 x 0.8inWeight: approx. 80-160gPackage List:2 x Print Head Note: Please remove the polishing cardboard nozzle and remove the orange rubber plug before installation.Instructions:After receiving the product, remove the nozzle from the package. Before disassembling the protective device, shake the nozzle continuously to the left and right according to the figure to achieve the best use effect to achieve the best use effect. Then remove the protective device (orange with the outwardly turned handle). In order to avoid the internal inverted buckle of the protective device from damaging the circuit of the print head and causing the print head to fail to operate, pay attention to push the handle out as hard as possible. Then pull the reminder label together with the sealing blue tape to tear off. Finally, pull out the protective plug of the ink supply needle (the orange belt, please shake the nozzle arrow left and right before opening the protective clip).Installation steps:First take out the two old print heads, close the cover and turn on the printer power normally. After the print head indicator on the machine flashes, open the cover. At this time, the print head carriage (carriage) in the machine will move to the left of the machine. After it stops, install the two nozzles one by one and close the machine cover. The machine will perform calibration and print a test page. Some models will prompt "calibration failed" or "calibration failed" (this is a technical obstacle set by the original company for its products to monopolize the market, but the chip has a memory function after all nozzles are regenerated, making the calibration fail , Has nothing to do with the quality of the regeneration nozzle). In such a situation, click the "OK" or "Confirm" button on the machine panel according to the prompts, and the printing will proceed normally.Reminder: Some models will calibrate and print a test page every time they are turned on. This is normal and has nothing to do with the quality of the print head. Just click the "0k" or "confirm" button on the machine panel. It will not be calibrated every time you print without turning off the machine. Some models of the machine will perform a longer calibration before and after the first printing, which lasts about 20 minutes. At this time, please do not turn off the machine or press any control keys to avoid affecting the calibration.Precautions:(1) Avoid physical contact with the nozzle holes and circuits of the nozzle to avoid electrostatic breakdown of electronic components and damage.(2) Check whether there is enough ink in the ink cartridge of the printer at any time, and add it in time to avoid the lack of ink to burn the nozzle.(3) The machine should not be left unused for too long to avoid clogging of the nozzles without a long time.(4) The nozzles and ink cartridges should not be removed frequently or not installed for a long time, so as to prevent the ink supply pipe from entering the air and causing the ink supply to be discontinuous, and the nozzle lack of ink will affect the printing effect or burn the nozzle.(5) If it prompts "KY print head failure" or "C business head failure", try to take out the two print heads, gently wipe the circuit contacts of the failed print head with an eraser, and then install and use.(6) When the printing effect is not satisfactory, the machine with a control panel can execute the item "cleaning nozzle" in the "setting" option on the panel. When a machine without a control panel is printing, a printer icon will appear in the lower right corner of the computer screen. After clicking on it, click "Printer" and then "Properties" in the dialog box of the county float, and then find the "Printer cleaning" item after entering. Different models have different attributes, and some models may not have this function. The nozzle can be taken out and soak the nozzle hole with clean 50-60 degree drinking water for 3-5 minutes. Pay attention to the nozzle hole soaking, and the water level should not be higher than the circuit contact. Then lightly print the nozzle hole with a clean paper towel, and print several times And clean the water stains before installing the machine to use.It is also recommended to set the print quality to "best quality" to also improve the printing effect..
Fruugo United Kingdom
Features:1. This is a professional print head that is compatible with a wide range of models.2. This print head is smoothand stable, and the color is natural. It is a worthy print replacement that you deserve.3. High quality ink with high degree of reduction and sufficient ink to save your cost.4. The nozzle is polished, no paper jam, and the printing process is smooth.5. All use Bayer rawmaterials from Germany, the quality is guaranteed.Specification:Color: Black / Yellow, Magenta / Cyan, CMYK (Optional)Applicable models:for HP Officejet Pro8000/8500/8500A PrintheadSize: Approx. 94 x 57 x 20 mm / 3.7 x 2.2 x 0.8inWeight: approx. 80-160gPackage List:2 x Print Head Note: Please remove the polishing cardboard nozzle and remove the orange rubber plug before installation.Instructions:After receiving the product, remove the nozzle from the package. Before disassembling the protective device, shake the nozzle continuously to the left and right according to the figure to achieve the best use effect to achieve the best use effect. Then remove the protective device (orange with the outwardly turned handle). In order to avoid the internal inverted buckle of the protective device from damaging the circuit of the print head and causing the print head to fail to operate, pay attention to push the handle out as hard as possible. Then pull the reminder label together with the sealing blue tape to tear off. Finally, pull out the protective plug of the ink supply needle (the orange belt, please shake the nozzle arrow left and right before opening the protective clip).Installation steps:First take out the two old print heads, close the cover and turn on the printer power normally. After the print head indicator on the machine flashes, open the cover. At this time, the print head carriage (carriage) in the machine will move to the left of the machine. After it stops, install the two nozzles one by one and close the machine cover. The machine will perform calibration and print a test page. Some models will prompt "calibration failed" or "calibration failed" (this is a technical obstacle set by the original company for its products to monopolize the market, but the chip has a memory function after all nozzles are regenerated, making the calibration fail , Has nothing to do with the quality of the regeneration nozzle). In such a situation, click the "OK" or "Confirm" button on the machine panel according to the prompts, and the printing will proceed normally.Reminder: Some models will calibrate and print a test page every time they are turned on. This is normal and has nothing to do with the quality of the print head. Just click the "0k" or "confirm" button on the machine panel. It will not be calibrated every time you print without turning off the machine. Some models of the machine will perform a longer calibration before and after the first printing, which lasts about 20 minutes. At this time, please do not turn off the machine or press any control keys to avoid affecting the calibration.Precautions:(1) Avoid physical contact with the nozzle holes and circuits of the nozzle to avoid electrostatic breakdown of electronic components and damage.(2) Check whether there is enough ink in the ink cartridge of the printer at any time, and add it in time to avoid the lack of ink to burn the nozzle.(3) The machine should not be left unused for too long to avoid clogging of the nozzles without a long time.(4) The nozzles and ink cartridges should not be removed frequently or not installed for a long time, so as to prevent the ink supply pipe from entering the air and causing the ink supply to be discontinuous, and the nozzle lack of ink will affect the printing effect or burn the nozzle.(5) If it prompts "KY print head failure" or "C business head failure", try to take out the two print heads, gently wipe the circuit contacts of the failed print head with an eraser, and then install and use.(6) When the printing effect is not satisfactory, the machine with a control panel can execute the item "cleaning nozzle" in the "setting" option on the panel. When a machine without a control panel is printing, a printer icon will appear in the lower right corner of the computer screen. After clicking on it, click "Printer" and then "Properties" in the dialog box of the county float, and then find the "Printer cleaning" item after entering. Different models have different attributes, and some models may not have this function. The nozzle can be taken out and soak the nozzle hole with clean 50-60 degree drinking water for 3-5 minutes. Pay attention to the nozzle hole soaking, and the water level should not be higher than the circuit contact. Then lightly print the nozzle hole with a clean paper towel, and print several times And clean the water stains before installing the machine to use.It is also recommended to set the print quality to "best quality" to also improve the printing effect..
Fruugo United Kingdom
For example, as shown in the figure is the number 4,194,304, then put Xxx / 1024/1024, 4194304/1024/1024 =4. " it means the computer can support up to 4GB Memory" I do not know if this RAM fit for my computer OK, please download a program on the website: so you can check your computer and confirm your CPU specification. when a specification of the computer is not the same with our information of our RAM memory, please do not buy this article because it will not work properly with your computer. Caution: The imformation of our images is a computer, that we choose to test, is only for reference. For more information about your computer, please see the topic of "CPU" "SPD" "Memory". Sequence: PC2 6400 = DDR2 800MHZ 6 size: 13.3*3cm and high quality. Color: green Material: PCB Backed by superior design and rigorous testing, this product is engineered for and continuing value. Capacity: 2GB Pins: 240-Pin Voltage:1.8V Form Factor: DIMM Buffering/ECC: Non-ECC, unbuffered Compatible with most major of desktop with AMD CPU. It is the for your /AMD cpu motherboard. "How to check the maximum storage capacity of my computer support?" 1. Press the taste "Windows" and "R", then the "Run" appears. 2. Enter "". Then a dialog box appears. 3. Continue typing with "wmic memphysical maxcapacity", then press "Enter" 4. You can then get the number, the unit KB. Pins of Memory DDR for Desktop=184 pins DDR for Laptop=200 pins DDR2 for Desktop=240 pins DDR2 for Laptop=200 pins DDR3 for Desktop=240 pins DDR3 for Laptop=204 pins Package Contents: 2 * Memory RAM Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Features: Keep your printer printing at top condition T3661 Ink Maintenance for tank box remanufactured for printer. Made of high quality ABS material, durable and with strong absorption capacity With for smart chip,easy to be recognized by printers New maintenance ink for tank for Expression Premium XP-6000 XP-6001 XP-6005 XP-6100 XP-6105 , Expression Photo XP-8500 XP-8600 XP-8605 XP-970 XP-15000 XP-15010 XP-15080 etc Specifications: Material: ABS Item: Maintenance Ink for Tank Model: T3661 Length:approx 10x4cm/3.94x1.57in Compatiuble with:Expression Premium XP-6000 XP-6001 XP-6005 XP-6100 XP-6105 , Expression Photo XP-8500 XP-8600 XP-8605 XP-970 XP-15000 XP-15010 XP-15080 Note: Due to the problems of lighting effects and shooting angles, there will be certain tolerances in the product, please understand. Please allow 0-1cm error due to the manual measurment. Package includes: 1 Set x Maintenance for Tank
Fruugo United Kingdom
Screen size: 5 inches Resolution: 800*480/high-brightness IPS Processor: 2-core RISC CPU integrated 64-bit processor, clocked at 533Mhz Running memory: DDR2 built-in External interface: 1.TF card (maximum support 64GB) 2.Type-c (9V-24V) This interface cannot be connected to the motorcycle's power supply at the same time. This interface is for convenience in power-on testing. Touch: support touch screen Recorder: Support (plug-in recorder), front and rear cameras Camera: camera, HD camera Power supply: 9V-24V (wide voltage power supply) Supports 265, 264, MPEG-12/4, JPEG, VC1 and other full format decoding. The hardware encoder can perform JPEG or MJPEG encoding. It integrates multiple adc/dac and 2S/PCM/DMIC/owac audio interfaces and Seamless CPU connection accelerates multimedia algorithms and provides a perfect voice interaction solution. Supports stereo headphone output and dual Bluetooth, which can be connected to mobile phone Bluetooth and helmet Bluetooth headphones at the same time, enabling safe navigation and riding on motorcycles. Mobile Internet: Support carplay and Android auto Tire pressure testing: ensuring riding safety Material: plastic colour: black Package Contents: 1 x Host 1 x Mounting bracket 1 x Protective case 1 cord 2 x Tire pressure 1 x Blue connector camera extension cable 1 x Green connector camera extension cable 1 x Blue connector camera 1 x Green connector camera Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom