1.Field upgradeable software 2.Standalone datalogs to microSD / microSDHC card without a laptop 3.Supports these major OBD protocols:CAN 2.0 (CAN/ISO15765) and K-line (ISO9141/ISO14230(KWP2000)/dual K line) Specifications: 1. 72Mhz 32-bit processor 2. USB 2.0 full speed device (USB-A/Mini cable included) 3. RGB status LEDs 4. to log from Motorsports 2.5mm stereo data bus 5. J2534 PassThru support with 6. to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector Type:B Material: plastic colour: As shown Package Contents: 1 x Openport 2.0 unit 1 x USB Cable 2 x CDS Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
6-Pin to 16-Pin Adapter for Delphi Test Line Motorcycle.
eBay
support computer system: WIN7, WIN8 (32 bit and 64 bit), WIN 10 system 32 bit system more stable, WIN10 64 bit system, tablet, depends on the computer configuration.It can do the following: *Manufacture Specific Serial Diagnosis *Scan Function *EOBD/OBDII Communication *Serial Systems />*Engine *Ignition *Climate *ABS *Service Reset *SRS *Immobilizer *Instrument *Comfort System *Gearbox etc. Features: With CARS you can perform brand specific diagnostics for cars and vans from 1988. A total of 47 different brands. With the TRUCKS software package you can perform brand specific diagnostics for light and heavy commercial vehicles, buses and trailers. from 1995. A total of 37 different brands.GENERIC diagnostic program is designed for legislation based diagnostics, specifically targeted for emissions related fault codes.GENERIC is included in CARS and TRUCKS packages. Multiplexer function, 2xHS CAN (ISO 11898-2), SW CAN (SAE J2411), K/L (ISO 9141-2), VPW (J1850), PWM (J1850), RS485 (J1708), TTL and (SPI, analog input, 5 volt output). Multi-Functions: FLIGHT RECORDER With the flight recorder function, you can record parameters in real time while driving a vehicle. While recording, you can press a button to highlight the specific error so that you can investigate the error. error detected later. it is equipped with built-in memory thus eliminating the need to bring a computer. The memory cart is not included in the package. MULTI-COLOR INDICATORWith the multi-color indicator on it, you have full control of the diagnostic process. Different colors and sounds communicate status, and the placement of the indicator lets you see it from afar. For example, if the indicator alternates between blue and green it is communicating with the vehicle's control unit. CONNECTOR WITH LED To easily locate the connector of diagnosis in the vehicle, even if it is located in a dark and inaccessible place, there is an LED on the 16-pin connector to help you. The location and design allow the light to work even when use the adapter cable for vehicles without a 16-pin diagnostic socket. VOLTAGE CHECK When connected to the vehicle, the device checks the voltage of the vehicle battery and automatically adjusts to the vehicle voltage level of 12 or 24V. If the voltage gets too high or too low, it will warn you with the two sounds. and light and you will also be alerted by the battery icon in our diagnostic software. CHASSIS VIN NUMBER In our CARS software we have a function intelligent that allows you to read the chassis number of the vehicle you want to diagnose. This ensures that the correct model and year are selected automatically. In addition, the engine code of vehicles, which are commonly available in the markets, is also selected automatically. ISS Intelligent System Scan (ISS) scans all vehicle systems and displays fault codes that are stored in each system. This saves time and provides a quick overview of the actual status of the entire vehicle. When the ISS is complete, you can then select a specific control system to analyze the results in more detail. ISI Intelligent System Identification (ISI) Automatically identifies and selects the type of controller fitted to the vehicle, ensuring that the diagnostic session is performed correctly with the correct parameters as required. REPORT FUNCTIONUnder this function tab, you will be able to see which adaptations and settings are possible for a specific vehicle without having the vehicle nearby. With the help texts as a guide, you can plan and be efficient in your work, even under complex situations. OBD FUNCTIONS It is equipped with a unique multiplexer technology, which allows it to be used on all types of vehicles, regardless of voltage levels and communication standards. For vehicles that do not use the standard 16-pin connector, we offer a complete set of certification and custom cables and adapter kits. UNIVERSAL For most OBD functions, such as settings and programming, there are detailed instructions and help texts to help you in your diagnostic work. You will find step-by-step information on prerequisites, preparation and implementation of various functions; to performNote: The data is manual measurement, please allow 1-65cm error, due to differences between light and screen, there will be a certain difference in color, the specific received in kind shall prevail.
Fruugo United Kingdom
8pcs car diagnostic adapter cables for OBD2 cars diagnostic interface tool. Function: car diagnostic cable and connector, OBD2 cable. Easy to install, durable, fit for car diagnostic tool. 1 Power Cables.
eBay
This product can only be installed on XP system, Please check carefully before you make order. PCB board chip: FTDI Chip Stable Function Require Window System: Windows XP Only (close anti-virus program and Please do not connect to internet and update,or device damged.) Language:English Functions: 1. Read and delete errors 2. Adaptations 3. Driver programming 4. Applu coding Supported Protocols: 1. Fast magisterial D-CAN and PT-CAN (500 kbit/s) 2. Slow magisterial K-CAN (100 kbit/s) 3. Standard for BMW K DCAN protocol (for BMW OBD interface). For BMW K DCAN E60, E61 od 03/2007 E83 od 09/2006 E81, E87 od 03/2007 E90, E91, E92, E93 od 03/2007 E70 (new model X5) R56 (new model MINI) PT-CAN, K-CAN - fully switchable speed of magisterial CAN - you can diagnose driver without any car. Protocol "for BMW OBD interface" for Older Cars From 1995 to 1998 (don't need K-line) From 1998 to 03/2008 (all models) Colour:As Shown Material:plastic+metal Package Contents: 1 x for BMW K+CAN Cable 1 x CD Driver(The style is random, and the designation is not accepted) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
6-Pin to 16-Pin Adapter for Delphi Test Line Motorcycle.
eBay
KONNWEI OBD II adapter is a powerful car diagnostic tool developed1:It is compliant with full OBD II/EOBD specifications. Various wireless connection modes to connect your smartphone or pad.2:It reads the real-time car engine data, such as engine speed, ignition time, fuel trim, water temperature, fuel consumption.3:It support a variety of OBD II apps.
Fruugo United Kingdom
Original Xhorse. 5x Xhorse Universal Smart Remote Key Fit for Toyota 4D 8A 4A 4 Buttons XSTO01EN. Xhorse Remote Tester Frequency Tester Infrared Signal Detection 315-433MH/868Mhz. Xhorse Wire Remote Key B5 Flip 3 Buttons XKB520EN Supports Wireless Progarmming.
eBay
Features 1. Mini VCI J2534 cable connector scanner adapter is suitable for Toyotas TIS Techstream V17/V18, firmware V1.4.1, OBD II adapter connector diagnostic cable scanning tool, supports Win XP/WIN7 WIN10 2. Obtain updated versions and ensure they are usable. Get the latest V18 here! 3. OBD2 scanning cable - VCI J2534 cable supports TIS Techstream diagnostic software and all diagnostic communication protocols required by Toyotas since 1996 for diagnosis, etc. 4. VCI J2534 cable version - software V18.00.008, firmware V1.4.1. Specification Material: Plastic Color: White Weight: 140 g Package Include: 1x Inspection Cable
Fruugo United Kingdom
OBD2 16 Pin to Delphi 6 Pin Cable. Interface: 16 Pin Male OBD2 to Delphi 6 Pin. Compatibility: Delphi Motogroup. Delphi 6 Pin Cable. Type: Diagnostic Cable. Protocol Support: ABS, SRS, and TPMS systems.
eBay
For BMW series single module programming or modules hiding ENET data line. Fitment:For BMW F series , the new 1 Series, 3 Series, 5 Series, 7 Series , GT, X3. Installation guide not included, we strongly recommend you seek professional installation. Product Features: One can hide modules or program single module 1. Lock unlock sound confirmation (to prevent radio interference, add sound to confirm car locked when turn light confirmation inconvenient. This is setup in cic) 2. Can operate the navigation menu including watching dvd when driving(for driving safety. Let the side driver operate the navigation menu) 3. Display engine output and torque meter (purely fun, look engine output) 4. Cancel confirmation screen big screen boot delay 5. Open the voice recognition function 6. Three kind of bluetooth phone ringtones (personality only) 7. Increasing the cic memory address to 50 8. The glass automatically rise to the top process is not terminated by the car door (easy to get off to close the window waiting) 9. The digital speed display (fun only) 10. Air-conditioned memory of the last off state (without air conditioning season is more convenient) 11. Indoor cycling memories of the last time the state when engine off Note: Please check as much as possible to make sure the item is what you need. Tips:The product may be updated constantly ,Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use. Colour:Red Material:Plastic Package Contents: 1 x Cable For BMW ENET (Ethernet to OBD) Interface Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Diagnostic Scanner ECU Cable OBD2 Adapter 6 Pin To 16 Pin Fits Delphi Motorbikes. Diagnostic Scanner Cable 6 Pin to OBD2 Fault Code Reader for Delphi Motorbikes. This adapter converts a standard 16 pin OBD2 connector into the Delphi 6 pin connector for plugging into your Delphi motorcycle.
eBay
Support vehicle diagnostic protocol ISO-9141 K-Line ISO-14230 K-Line ISO-15765 CAN ISO-11898-2 DWCAN ISO-11898-3 DWFTCAN Software Support Language: German Brazilian Danish Spanish Finnish French Italian Norway Dutch Portuguese Romania English Swedish Software for Diagnostic of electronic systems for Renault, For Dacia and For Samsung. Service program for diagnostic and maintenance of vehicles. Allows full diagnostics ECU cars engine injector, automatic transmission, ABS+ESP, airbags, climate control, staff xenon, CECBS, dashboard. The functionality of Renault CAN Clip: Integrated information system Block coding and adaptations Programming of control units Activation of Executive mechanisms Display complete information about Renault cars Automatic diagnostics of car electronic systems Testing of the AIRBAG module Conducting OBD tests Windows 7, 8, 10 (32bit is highly recommended) Due to different batches, there may be differences in product appearance, color, and printed text, which will not affect the use. Colour:random color , don't accept the specified color Material:Metal Package Contents: 1 x V234 Can Clip WIFI Version Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
8pcs car diagnostic adapter cables for OBD2 cars diagnostic interface tool. Function: car diagnostic cable and connector, OBD2 cable. Easy to install, durable, fit for car diagnostic tool. 1 Power Cables.
eBay
For BMW INPA K+CAN K+DCAN FTDI FT232RL Chip with Switch USB Interface Diagnostic Tool For BMW OBD2 Scanner JR2025032601225New Arrivel For BMW INPA K+CAN With FT232RL Chip with Switch, works on BMW with 8 pin and with K-LINE protocol. Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 20013 (all functions as in OMNITEC interface). Build in 2 lines K and D-Can magisterial INPA K+CAN for BMW Features 1. Read and delete errors 2. Adaptations 3. Driver programming 4. Applu coding - And others... INPA K+CAN for BMW Supports Protocols 1: Fast magisterial D-CAN and PT-CAN (500 kbit/s) 2: Slow magisterial K-CAN (100 kbit/s) 3: Standard BMW protocol (BMW OBD interface). D-CAN for 1: E60, E61 od 03/2007 2: E83 od 09/2006 3: E81, E87 od 03/2007 4: E90, E91, E92, E93 od 03/2007 5: E70 (new model X5) 6: R56 (new model MINI) PT-CAN, K-CAN - fully switchable speed of magisterial CAN - you can diagnose driver without any car Protocol for BMW OBD interface for Older Cars From 1995 to 1998 (don't need K-line). From 1998 to 03/2013 (all models) Package Including: 1pc x K+CAN for BMW INPA Cable with Switch 1pc x CD Driver
Fruugo United Kingdom
6-Pin to 16-Pin Adapter for Delphi Test Line Motorcycle.
eBay