Direnza's MVT Intercoolers represent the result of intensive development, built with a singular focus: achieving measurable improvements in intake temperature reduction and charge air cooling. Through advanced manufacturing and relentless testing, these intercoolers deliver consistent performance under demanding conditions. As an authorised distributor, we’re proud to supply Direnza's MVT range — engineered for serious gains in both power and reliability. +11.6hp / + 20.1nm Intake temps reduced by 32°c Temperature drop of 137°c 109% larger than stock Designed using state of the art CAD and CFD modelling software Black coating improves heat dissipation properties Direct replacement for the original intercooler TIG welded for maximum strength and durability MVT technology designed by Direnza offers greater intercooler efficiency in comparison to other aftermarket alternatives. This is achieved through the use of carefully placed vanes in the end tank which evenly distribute air across the entire core. Ensuring the full surface area of the intercooler core is optimised to cool your charged air, resulting in more power. Test car: Hyundai i30N 2019 (Stage 1) 297.3hp /425.9nm Put through its paces on a state-of-the-art Maha MSR 500 Dyno, our Multi Vane Technology Intercooler for the Hyundai i30N platform yielded some highly impressive results. After installing our revolutionary MVT Intercooler, engine performance improved significantly. With the i30N now producing 308.9hp & 446nm of torque, that’s an increase of +11.6hp & 20.1nm of torque! What’s more impressive is the cooling power of MVT. Using sophisticated data logging software, we measured stock intake temperatures at 62°c. With MVT, intake temperatures dropped by 32°c, that is a reduction of 52%! Thus, providing huge tuning potential and greater reliability when combined with a remap & supporting modifications. The perfect addition to any track or modified road car! We also went one step further by placing temperature probes into the inlet and outlet of the Intercooler. This allows us to accurately compare the difference in temperatures as the charged air passes though the core. Data for the stock intercooler showed us charged air temperatures dropped from 168°c(inlet) to 70°c(outlet). However, this figure was reduced by 56% down to 31°c(outlet) thanks to the efficiency of our MVT Intercooler. Providing an enormous overall temperature drop of 137°c (82%). Stock Core Volume: 7,100cm3 MVT Stepped Core Volume: 14,900cm3
Gravity Performance
Direnza's MVT Intercoolers represent the result of intensive development, built with a singular focus: achieving measurable improvements in intake temperature reduction and charge air cooling. Through advanced manufacturing and relentless testing, these intercoolers deliver consistent performance under demanding conditions. As an authorised distributor, we’re proud to supply Direnza's MVT range — engineered for serious gains in both power and reliability. Performance increase of +15.7hp / + 10.6nm Intake temps reduced by 46°c Overall temperature drop of 106.4°c Designed using state of the art CAD and CFD modelling software Black coating improves heat dissipation properties Direct replacement for the original intercooler TIG welded for maximum strength and durability MVT technology designed by Direnza offers greater intercooler efficiency in comparison to other aftermarket alternatives. This is achieved through the use of carefully placed vanes in the end tank which evenly distribute air across the entire core. Ensuring the full surface area of the intercooler core is optimised to cool your charged air, resulting in more power. Test car: Mini R56 Cooper S Stage 1 229.2hp /339.9nm Put through its paces on a state-of-the-art Maha MSR 500 Dyno, our Multi Vane Technology Intercooler for the R56 yielded some highly impressive results. After installing our revolutionary MVT Intercooler, engine performance improved significantly. With the Mini now producing 244.9hp & 350.5nm of torque, that’s an increase of +15.7hp & 10.6nm of torque! What’s more impressive is the cooling power of MVT. Using sophisticated data logging software, we measured stock intake temperatures at 81°c. With MVT, intake temperatures dropped by 46°c! Thus, providing huge tuning potential and greater reliability when combined with a remap & supporting modifications. The perfect addition to any track or modified road car! We also went one step further by placing temperature probes into the inlet and outlet of the Intercooler. This allows us to accurately compare the difference in temperatures as the charged air passes though the core. Data for the stock intercooler showed us charged air temperatures dropped from 141.3°c(inlet) to 82.1°c(outlet). However, this figure was reduced down to 34.9°c(outlet) thanks to the efficiency of our MVT Intercooler. Providing an overall temperature drop of 106.4°c.
Gravity Performance
Direnza's MVT Intercoolers represent the result of intensive development, built with a singular focus: achieving measurable improvements in intake temperature reduction and charge air cooling. Through advanced manufacturing and relentless testing, these intercoolers deliver consistent performance under demanding conditions. As an authorised distributor, we’re proud to supply Direnza's MVT range — engineered for serious gains in both power and reliability. Intake air temps 12.75°C lower than stock intercooler 42% larger than stock intercooler core Black coating improves heat dissipation properties Designed using state of the art 3D CAD and CFD modelling Direct replacement for the original core TIG welded for maximum strength and durability MVT technology designed by Direnza offers greater intercooler efficiency in comparison to other aftermarket alternatives. This is achieved through the use of carefully placed vanes in the end tank which evenly distribute air across the entire core. Ensuring the full surface area of the intercooler core is optimised to cool your charged air, resulting in more power. Test car: BMW F20 M135i 2016 Put through its paces on a state-of-the-art Maha MSR 500 Dyno, our Multi Vane Technology Intercooler for the PQ35 platform yielded some highly impressive results. When tested on the dyno, we saw Intake temperatures drop by 12.75°C with our MVT intercooler installed. We also successfully tested the Intercooler up to 418.6bhp without intake temperatures reaching stock levels.
Gravity Performance
Direnza's MVT Intercoolers represent the result of intensive development, built with a singular focus: achieving measurable improvements in intake temperature reduction and charge air cooling. Through advanced manufacturing and relentless testing, these intercoolers deliver consistent performance under demanding conditions. As an authorised distributor, we’re proud to supply Direnza's MVT range — engineered for serious gains in both power and reliability. Intake air temps 12.75°C lower than stock intercooler 42% larger than stock intercooler core Black coating improves heat dissipation properties Designed using state of the art 3D CAD and CFD modelling Direct replacement for the original core TIG welded for maximum strength and durability MVT technology designed by Direnza offers greater intercooler efficiency in comparison to other aftermarket alternatives. This is achieved through the use of carefully placed vanes in the end tank which evenly distribute air across the entire core. Ensuring the full surface area of the intercooler core is optimised to cool your charged air, resulting in more power. Test car: BMW F20 M135i 2016 Put through its paces on a state-of-the-art Maha MSR 500 Dyno, our Multi Vane Technology Intercooler for the PQ35 platform yielded some highly impressive results. When tested on the dyno, we saw Intake temperatures drop by 12.75°C with our MVT intercooler installed. We also successfully tested the Intercooler up to 418.6bhp without intake temperatures reaching stock levels.
Gravity Performance
Direnza's MVT Intercoolers represent the result of intensive development, built with a singular focus: achieving measurable improvements in intake temperature reduction and charge air cooling. Through advanced manufacturing and relentless testing, these intercoolers deliver consistent performance under demanding conditions. As an authorised distributor, we’re proud to supply Direnza's MVT range — engineered for serious gains in both power and reliability. 77% larger than stock Designed using state of the art CAD and CFD modelling software Black coating improves heat dissipation properties Direct replacement for the original intercooler TIG welded for maximum strength and durability MVT technology designed by Direnza offers greater intercooler efficiency in comparison to other aftermarket alternatives. This is achieved through the use of carefully placed vanes in the end tank which evenly distribute air across the entire core. Ensuring the full surface area of the intercooler core is optimised to cool your charged air, resulting in more power. Test car: Audi S5 B9 417.8hp /605.2nm* Put through its paces on a state-of-the-art Maha MSR 500 Dyno, our Multi Vane Technology Intercooler for the Audi B8 B9 yielded some highly impressive results. After installing our revolutionary MVT Intercooler, engine performance improved significantly. With the S5 test car now producing 433.6hp & 618.8nm of torque, that’s an increase of +15.8hp & 13.6nm of torque without any additional tuning. What’s more impressive is the cooling power of MVT - Using sophisticated data logging software, we measured stock intake temperatures at 47.6°c. With MVT, intake temperatures dropped by 27.2°c! Thus, providing huge tuning potential and greater reliability when combined with a remap & supporting modifications. The perfect addition to any track or modified road car! Intercooler Core Size: OEM: 80mm x 145mm x 720mm 8.35L MVT: 61mm x 445mm x 545mm 14.79L *Please note testing data provided by the 3.0 TFSI version of this Intercooler Core.
Gravity Performance
Direnza's MVT Intercoolers represent the result of intensive development, built with a singular focus: achieving measurable improvements in intake temperature reduction and charge air cooling. Through advanced manufacturing and relentless testing, these intercoolers deliver consistent performance under demanding conditions. As an authorised distributor, we’re proud to supply Direnza's MVT range — engineered for serious gains in both power and reliability. Provided performance gains of +21.8bhp / 16.8nm Intake Temperatures reduced by 10°C 116.7°c Temperature drop Designed using state of the art 3D CAD and CFD modelling Direct replacement for the original Intercooler TIG welded for maximum strength and durability MVT technology designed by Direnza offers greater intercooler efficiency in comparison to other aftermarket alternatives. This is achieved through the use of carefully placed vanes in the end tank which evenly distribute air across the entire core. Ensuring the full surface area of the intercooler core is optimised to cool your charged air, resulting in more power. Test car: Ford Focus MK4 ST 291.4hp / 429.2nm Put through its paces on a state-of-the-art Maha MSR 500 Dyno, our Multi Vane Technology Intercooler for the Focus ST yielded some highly impressive results. After installing our revolutionary MVT Intercooler, engine performance improved significantly. With the Focus now producing 313.2hp & 445.9nm of torque, that’s an increase of +21.8hp & 16.7nm of torque without any additional tuning. What’s more impressive is the cooling power of MVT. Using sophisticated data logging software, we measured intercooler inlet temperatures at 140.1°c. The stock intercooler performed well, reducing this to 63.9°c at the Intercooler outlet. However, with MVT installed, outlet temps were reduced an additional 40.5°c down to 23.4°c! That's an overall temperature drop of 116.7°c. Thus, providing huge tuning potential and greater reliability when combined with a remap & supporting modifications. The perfect addition to any track or modified road car!
Gravity Performance
Direnza's MVT Intercoolers represent the result of intensive development, built with a singular focus: achieving measurable improvements in intake temperature reduction and charge air cooling. Through advanced manufacturing and relentless testing, these intercoolers deliver consistent performance under demanding conditions. As an authorised distributor, we’re proud to supply Direnza's MVT range — engineered for serious gains in both power and reliability. Intake air temps 12.75°C lower than stock intercooler 42% larger than stock intercooler core Black coating improves heat dissipation properties Designed using state of the art 3D CAD and CFD modelling Direct replacement for the original core TIG welded for maximum strength and durability MVT technology designed by Direnza offers greater intercooler efficiency in comparison to other aftermarket alternatives. This is achieved through the use of carefully placed vanes in the end tank which evenly distribute air across the entire core. Ensuring the full surface area of the intercooler core is optimised to cool your charged air, resulting in more power.
Gravity Performance
Direnza's MVT Intercoolers represent the result of intensive development, built with a singular focus: achieving measurable improvements in intake temperature reduction and charge air cooling. Through advanced manufacturing and relentless testing, these intercoolers deliver consistent performance under demanding conditions. As an authorised distributor, we’re proud to supply Direnza's MVT range — engineered for serious gains in both power and reliability. More than 100% larger than the standard intercooler for even more gains 17.9L (cubic capacity) offering increased cooling capability Huge temperature drops across the board, ideal for demanding track sessions Designed using state of the art 3D CAD and CFD modelling Direct replacement for the original intercooler TIG welded for maximum strength and durability Our latest design for the Focus MK3 ST MVT intercooler offers a much larger core, with smoother end tanks and CAD designed mounts for easy fitment onto your focus. More than 100% larger than the OEM intercooler, our new design provides even better gains and improved cooling capabilities by incorporating our advanced Multi Vane Technology. Provided with a Direnza Stencil, you can easily apply our Direnza logo to the front of the intercooler. Our MVT intercooler also comes with a scoop to fit on the bottom of the core, further enhancing its performance.
Gravity Performance