Top 5 Reasons to AdblueOBD2 Emulator for Trucks:1. ADBlueOBD2 is easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.2. ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable sensors.3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.4. ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck setting.5. ADBlueOBD2 does not change any of the permanently. To turn back to the truck's original , just unplug adBlueOBD2 from OBD2 connector.AdblueOBD2 Emulator for Trucks AdBlueOBD2 is a Plug&Drive device to mulate working adBlue and sensors on trucks, which equipped with EURO 4/5/6 catalytic converter , even with damaged adBlue system.dBlueOBD2 is easy to install.Installation and Calibration for Trucks:1. Pull the Key out from the ignition.2. Remove the following Fuses (For )Terminal - 15Terminal - 303. Plug adBlueOBD2 into OBD2 connector4. Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.5. If any fault light appears on dashboard, delete via service scanner.Material:plasticcolour:As shownPackage Contents:1 * adBlue OBD2 Emulator Box InterfaceOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
[Replace Part Number] Replaces 9038 9036 9037. [Precise Control] This relay switch kit can control the relay circuit independently of the "key-on" system, ensuring reliable operation of car components and enabling and precise control of important car components. [Premium Materials] This switch kit is made of premium materials, dustproof and waterproof; the silver contacts have high conductivity, ensuring continuous and stable power supply, making it very . [Easy Installation] The relay bypass switch kit is easy to install, simply plug and play. Just insert it into the fuel pump relay location to directly control the fuel pump circuit, allowing for quick electrical diagnostics. Color:Black Material:ABS Package Contents: 6 x Relay Bypass Switch(There are small differences in printed words) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
38 Pin to 16 Pin OBD2. For Mercedes Benz 38Pin Connector,works on all Mercedes Benz vehicles with a 38 PIN diagnostic connector. This is a brand new data link cable, used specifically for connecting your OBD2 scanner. Connect compatible diagnostic tools on a Mercedes Benz vehicle fitted with a 38 pin socket with your existing 16 pin OBD tool. High temperature resistance, all copper wire manufacturing, multi device stable power supply Just plug this into the interface and your MB then you can start to work on the car.Very useful to have as part of the MB carsoft,ELM 327 or any of the Code Readers Condition: 100% New Voltage: 12V Colour: Black material: plastic Package Contents: 1 * Cable diagnosis Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Features: The Vas6154A diagnostic tool is a professional automotive scanner that provides precise diagnostic capabilities. It quickly and accurately detects and diagnoses vehicle problems, helping users solve various car concerns. This diagnostic tool is compatible for multiple car brands, making it suitable for different vehicles. It meets the diagnostic needs of various car models, offering convenience and practicality. The Vas6154A diagnostic tool is an essential tool for professional automotive technicians. It is suitable for those with in depth knowledge of car system who require accurate diagnosis and repair. This diagnostic scanner is designed for use in automotive repair shops, assisting vehicle repair personnel in quickly identifying and resolving car faults. It provides efficient diagnostics for effective repairs. In addition to fault repairs, this diagnostic tool can also be used for regular car inspections and maintenance. It can check sensors, clear fault codes, and adjust settings, ensuring optimal car performances. Specifications: Material:ABS Size:As Picture Shown Note: .Please allow 1-2cm errors due to manual measurement, make sure that you do not mind before you order. .Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thanks for your understandings. Package includes: 1 Set Car Diagnostic Scanner
Fruugo United Kingdom
The seat occupancy mat is a sensor mounted in the front passenger seat. The emulator simulates a situation of a person sitting in the passenger seat with a seat belt fastened. To make the emulator work you need a diagnostic tool (like for Autel, for Bosch, for iCarsoft etc.) to remove old errors of a broken seat mat that are stored in the airbag control unit. Once you connect the emulator your diagnostic tool will be able to remove old errors and turn off the SRS/airbag warning. Unfortunately, the errors related to the safety systems are not removing automatically. Before purchase, please scan your car with a diagnostic tool to make sure your SRS/airbag warning is caused by a defective seat mat. Name:Car Seat Occupancy Mat Sensor SRS Bypass Emulator Fitment Type: Direct Replacement Install Condition: 100% New Type: 3+2Pin 2 Heads Fitment:for Mercedes Benz C-Class W203 Saloon/Sedan (2000-2004) before facelift Colour:As Shown Material:Plastic Package Contents: 1 x Car Seat Bypass Emulator Sensor Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
The seat occupancy mat is a sensor mounted in the front passenger seat. The emulator simulates a situation of a person sitting in the passenger seat with a seat belt fastened. To make the emulator work you need a diagnostic tool (like for Autel, for Bosch, for iCarsoft etc.) to remove old errors of a broken seat mat that are stored in the airbag control unit. Once you connect the emulator your diagnostic tool will be able to remove old errors and turn off the SRS/airbag warning. Unfortunately, the errors related to the safety systems are not removing automatically. Before purchase, please scan your car with a diagnostic tool to make sure your SRS/airbag warning is caused by a defective seat mat. These warnings can be turned on by at least 6 sensors mounted in the seat. The emulator solves the problem caused by a faulty seat mat only. The emulator will not solve your problem if a different sensor is faulty - the SRS/airbag warning light will still be present after connecting the emulator and removing the error present in the diagnostic tool. Name:Car Seat Occupancy Mat Sensor SRS Bypass Emulator Fitment Type:Direct Replacement Install Fitment: for Mercedes Benz E-Class W211 Saloon/Sedan (production years: 2004-2009) for Mercedes Benz E-Class S211 Estate (production years: 2004-2010) for Mercedes Benz CLS C219 (production years: 2004-2010) for Mercedes Benz S-Class W221 (production years: 2005-2013) for Mercedes Benz CL/S-Class Coupe C216 (production years: 2006-2014) Color:As Shown Material:Plastic Package Contents: 1 x Car Seat Occupancy Bypass SRS Emulator MAT Sensor Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
New for engine diagnostic tool for INLINE 7 Data Link Adapter has a faster processor, more robust algorithms, larger memory buffers and more sophisticated filtering than previous models while simultaneously accessing multiple vehicle data channels. INLINE 7 supports USB, Bluetooth technologies in a single device. INLINE 7 communicates with your PC and is designed for capability with mobile products. In order to make the for hardware work more stable, we still use the for Inline 6 hardware driver, but use the for Inline 7 diagnostic software, the same function. 1. Hardware: for in-line 7 data link adapter 2. Software: for Insite 8.7 3. Update method: Update by CD 4. Multilingual: English (US)/ Chinese (Simplified)/ Danish/Dutch/Finnish/French/German/Italian/Japanese/Korean/Norwegian/Portuguese/Russian/Spanish/Swedish/Turkish 5. Recommended : Win7 32-bit system,8.7 software only supports win10 system 6. Connection mode: USB function with a wide array of for , Part Number and third- service and information tools, including the following: for INSITE for PowerSpec for CAT Electronic Technician (On-Highway only) for Navistar -ServiceMaxx Pro for PTT for VCAD Elite /for for V- Service Tools Please check as much as possible to make sure the item is what you need. Tips: The product may be updated constantly ,Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use Colour:Photo Color Material:plastic Package Contents: 1 x for NLINE 7 data link adapter set Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
1.Flexible and easy to use. 2.New and nice qulity, durable to use. 3.Built to strict quality control standards. 4.Stable performance, high reliability. 5.Tested prior to leaving the factory. Type Name: Mass Air Flow Sensor Part Number: PE01-13-215 E5T62271 PE0113215 Fitment: For Mazda 3 2.0L 1998CC 122Cu. In. l4 GAS DOHC Naturally Aspirated 2014 For Mazda 3 2.0L 2000CC 122Cu. In. l4 GAS DOHC Naturally Aspirated 2012-2013 For Mazda 3 2.0L 1999CC 122Cu. In. l4 GAS DOHC Naturally Aspirated 2012-2013 For Mazda 3 2.3L 2260CC l4 GAS DOHC Turbocharged 2012-2013 For Mazda 3 2.5L 2488CC 152Cu. In. l4 GAS DOHC Naturally Aspirated 2013-2014 For Mazda 6 2.5L 2488CC 152Cu. In. l4 GAS DOHC Naturally Aspirated 2014 For Mazda CX-5 2.5L 2488CC 152Cu. In. l4 GAS DOHC Naturally Aspirated 2012-2013 For Mazda CX-5 2.0L 1998CC 122Cu. In. l4 GAS DOHC Naturally Aspirated 2012-2013 Colour: Black Material: ABS Package Contents: 1 x Mass Air Flow Sensor Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom