Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showQuantity:1pcsFeatures:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations. Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.Scope of application: Non occlusal cavity filling repair.Attention: Close the lid immediately after use to avoid exposure to light.Contraindications: For pulpitis, use with caution. When penetrating the pulp or near the pulp chamber, it is necessary to perform pulp capping and pulp protection surgery before filling with resin. Other pulp diseases should be treated before filling.Storage conditions: Store at room temperature and avoid direct sunlight.
Fruugo United Kingdom
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showQuantity:1pcsFeatures:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations. Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.Scope of application: Non occlusal cavity filling repair.Attention: Close the lid immediately after use to avoid exposure to light.Contraindications: For pulpitis, use with caution. When penetrating the pulp or near the pulp chamber, it is necessary to perform pulp capping and pulp protection surgery before filling with resin. Other pulp diseases should be treated before filling.Storage conditions: Store at room temperature and avoid direct sunlight.
Fruugo United Kingdom
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showQuantity:1pcsFeatures:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations. Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.Scope of application: Non occlusal cavity filling repair.Attention: Close the lid immediately after use to avoid exposure to light.Contraindications: For pulpitis, use with caution. When penetrating the pulp or near the pulp chamber, it is necessary to perform pulp capping and pulp protection surgery before filling with resin. Other pulp diseases should be treated before filling.Storage conditions: Store at room temperature and avoid direct sunlight.
Fruugo United Kingdom
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showQuantity:1pcsFeatures:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations. Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.Scope of application: Non occlusal cavity filling repair.Attention: Close the lid immediately after use to avoid exposure to light.Contraindications: For pulpitis, use with caution. When penetrating the pulp or near the pulp chamber, it is necessary to perform pulp capping and pulp protection surgery before filling with resin. Other pulp diseases should be treated before filling.Storage conditions: Store at room temperature and avoid direct sunlight.
Fruugo United Kingdom
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showQuantity:1pcsFeatures:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations. Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.Scope of application: Non occlusal cavity filling repair.Attention: Close the lid immediately after use to avoid exposure to light.Contraindications: For pulpitis, use with caution. When penetrating the pulp or near the pulp chamber, it is necessary to perform pulp capping and pulp protection surgery before filling with resin. Other pulp diseases should be treated before filling.Storage conditions: Store at room temperature and avoid direct sunlight.
Fruugo United Kingdom
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showQuantity:1pcsFeatures:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations. Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.Scope of application: Non occlusal cavity filling repair.Attention: Close the lid immediately after use to avoid exposure to light.Contraindications: For pulpitis, use with caution. When penetrating the pulp or near the pulp chamber, it is necessary to perform pulp capping and pulp protection surgery before filling with resin. Other pulp diseases should be treated before filling.Storage conditions: Store at room temperature and avoid direct sunlight.
Fruugo United Kingdom
Fit Model Car Model Year for 2017-2021 2.0TFSI, 2012-2019 2.0TFSI, 2013-2019 2.0TFSI, Golf Cabriolet 2012-2016 2.0TFSI, Golf / Variant / 2013-2021 2.0TFSI, 2011-2018 1.8/2.0TFSI, /Variant / 2013-2021 1.8/2.0TFSI, 2015-2018 1.8TFSI, 2015-2018 2.0TFSI, 2016-2021 2.0TFSI, 2016-2021 1.8TFSI, 2016-2021 2.0TFSI, 2018-2021 2.0TFSI, Teramont 2018-2021 2.0TFSI for A1 2015-2018 1.8TFSI. for A3/S3 2013-2021 2.0TFSI. for A3 Cabriolet 2017-2021 2.0TFSI. for A4 / 2013-2021 2.0TFSI. for A4 /S4// 2013-2021 2.0TFSI. for A6 Allroad 2013-2018 3.0TFSI. for A5 /S5 Cabriolet 2012-2021 2.0TFSI. for A5 /S5 Coupe/Sportback 2012-2021 2.0TFSI. for A6 / 2015-2021 2.0TFSI. for A6 /S6/ 2015-2021 2.0TFSI. for A7 Sportback 2015-2021 2.0TFSI for A8 2014-2017 2.0/3.0TFSI. for A8 /S8 2014-2017 2.0/3.0TFSI. for Q2 2017-2021 2.0TFSI. for Q3 2015-2021 2.0TFSI. for Q5 2017-2021 2.0TFSI. for 2016-2021 2.0TFSI. for Q8 2019- 2.0TFSI. for TT /TTS Coupe /Roadster 2015-2021 2.0TFSI for 2013-2021 2.0TFSI, Superb 2015-2021 1.8/2.0TFSI for Seat 2016-2021 2.0TFSI, 2016-2021 2.0TFSI, 2013-2021 1.8/2.0TFSI, 2016-2017 1.8TFSI Fit Number 06K907386A 06K 907 386 A 06K907386B 06K 907 386 B 06K907386D 06K 907 386 D 06K907386F 06K907 386 F 06N907386 06N 907 386 Voltage:12V Number of plug pins: 3 Material: Plastic Installing Location: Intake Manifold Attention : It is better that you send us VIN // chassis number to check Colour: Black Material: ABS Package Contents: 1x Intake Manifold Sensor Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
4Pcs TLP-01-1 For Parkside PRTA 20-LI A1-IAN 311046 Replacement Spool Cover •Made of ABS material,high strength,good toughness,excellent wear resistance •Protect your spool and line,and let your lawn trimmer work safely •Convenient to change,easy to install •A great replacement spool cap for your lawn mower •Suitable for Parkside PRTA 20-LI A1-IAN 311046,PRTA 20-LI B1-IAN 330831,PRTA 20-LI B2-IAN 334231,PRTA 20-LI C3-IAN 351753,PRTA TA 20-LI. C3-IAN 365589,PRTA 20-LI C3-IAN 385583,PRTA 20-LI C3-IAN 402319,PRT300 A1-IAN 360066,PRT 550 A1-IAN 311404,PRT 550 A3-IAN 33024.1,PRT550 A3-IAN 351652 Specification: •Product size: 80x35mm •Material: ABS Compatible with: •Parkside PRTA 20-Li A1-IAN 311046 •Parkside PRTA 20-LI B1-IAN 330831 Package included: •4 x Spool Cap •Other things not included
Fruugo United Kingdom