Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showQuantity:1pcsFeatures:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations. Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.Scope of application: Non occlusal cavity filling repair.Attention: Close the lid immediately after use to avoid exposure to light.Contraindications: For pulpitis, use with caution. When penetrating the pulp or near the pulp chamber, it is necessary to perform pulp capping and pulp protection surgery before filling with resin. Other pulp diseases should be treated before filling.Storage conditions: Store at room temperature and avoid direct sunlight.
Fruugo United Kingdom
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showQuantity:1pcsFeatures:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations. Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.Scope of application: Non occlusal cavity filling repair.Attention: Close the lid immediately after use to avoid exposure to light.Contraindications: For pulpitis, use with caution. When penetrating the pulp or near the pulp chamber, it is necessary to perform pulp capping and pulp protection surgery before filling with resin. Other pulp diseases should be treated before filling.Storage conditions: Store at room temperature and avoid direct sunlight.
Fruugo United Kingdom
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showQuantity:1pcsFeatures:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations. Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.Scope of application: Non occlusal cavity filling repair.Attention: Close the lid immediately after use to avoid exposure to light.Contraindications: For pulpitis, use with caution. When penetrating the pulp or near the pulp chamber, it is necessary to perform pulp capping and pulp protection surgery before filling with resin. Other pulp diseases should be treated before filling.Storage conditions: Store at room temperature and avoid direct sunlight.
Fruugo United Kingdom
Source Countries:Japan and South Korea Department Name:Adult Model Number:Q202211121728 Source Type:anime Material:Polyester Item Type:Sets Characters:Seishiro Nagi Components:Top,Shorts,Jumpsuits & Rompers Gender:Unisex Brand Name:wow chan Origin:Mainland China CN:Henan Special Use:Costumes Seishiro Nagi:Halloween Clothing Nagi Seishiro:black No. 11 jersey
Fruugo United Kingdom
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showQuantity:1pcsFeatures:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations. Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.Scope of application: Non occlusal cavity filling repair.Attention: Close the lid immediately after use to avoid exposure to light.Contraindications: For pulpitis, use with caution. When penetrating the pulp or near the pulp chamber, it is necessary to perform pulp capping and pulp protection surgery before filling with resin. Other pulp diseases should be treated before filling.Storage conditions: Store at room temperature and avoid direct sunlight.
Fruugo United Kingdom
material Light weight and durability This is High quality of Plastic material Easy installation, Excellent fitment and Superior Material Specifics: Type: Yaw Rate Sensor Condition: Fitment Type: Direct Replacement Part Number: 1J0907657A 1J2907637A (Please refer to the pictures and check Part Numberbefore purchasing) Fitment: For /Variant/ 1999-2001 For 1998-2001 For Golf 1998-2001 For A2 2000-2005 For A3/S3/Sportb 2001-2003 For A3/S3/Sportb 1997-2000 For 1997-2000 For Seat /Vario (SEAT) 1999-2002 For Seat Toledo (SEAT) 1999-2001 For Seat / (SEAT) 1999-2002 For Seat (SEAT) 2003-2005 For Seat (SEAT) 2001-2002 Colour:black Material:plastic Package Contents: 1 x Yaw Rate Sensor Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Features: 1Fits for Yamaha outboard 4 and 5 HP 2-stroke 6E0 models. 2Part numbers: 6e0-W0078-A2, 6E0-W0078-00, 6E0-W0078-01, 6E0-W0078-02, 6E0-W0078-A2, 6E0-W0078-A200. 3Inlcuding Full Power Plus Neoprene Impeller, Wear Plate, Insert Cup, Water Pump Gasket, Dowell, Pin, Damper, Water Seal, Water Pump Housing, Installation bolt and washer. 4Made of the most rugged, hardened nylon resistant to marine and chemical corrosion and scientifically designed high-performance neoprene. 5This kit makes repairing and maintaining the pump easy, economical and affordable. Condition: 100% Brand New Item Type: Water Pump Impeller Repair Kit Material: Rubber + Stainless Steel + Nylon Color: As Pictures Shown Part Number: 6e0-W0078-A2, 6E0-W0078-00, 6E0-W0078-01, 6E0-W0078-02, 6E0-W0078-A2, 6E0-W0078-A200 Fitment: Fits for Yamaha 4 hp 2 stroke 1984-1999 Fits for Yamaha 5 hp 2 stroke 1984-2002 Fits for Yamaha 4 hp 4 stroke 2000-2005 4AC ( 6EO) 4AS (6E1) 4A (6E2) 5C (6E3) 5CS (6E4) Pakcage Included: 1 x Water Pump Impeller Repair Kit(Inlcuding the Following Parts:1 x Full Power Plus Neoprene Impeller 6E0-44352-001 x Wear Plate  6E0-44323-001 x Insert Cup 6E0-44322-021 x Water Pump Gasket 6E0-44315-A01 x Dowell, Pin 93604-090661 x Damper, Water Seal  6E0-44366-001 x Water Pump Housing 6E0-44311-004 x Installation bolt and washer 97395-06045)
Fruugo United Kingdom
100% Brand New & High Quality Meet the quality standards, 100% tested before shipment. Direct replacement, simple plug and play, no wiring required. Made of high quality material, anti-corrosion, wear-resistant, non-deformation. Part Number: A2229054509 2229054509 2229019203 2229026010 2229059607 Fitment: For Mercedes Benz GLC-Class X253 / C253 (2016-) For Mercedes Benz C-Class W205 (2016-) For Mercedes Benz S-Class W222 (2016-) For Mercedes Benz V-Class W447 (2009-) For Mercedes Benz 448 (2017-) Oftentimes, people buy the wrong camera because they only match the model/year of their car. To avoid this, you just need to compare your part number to this one and make sure they match! color:Black Material:Plastic + Metal Package Contents: 1 x Rear View Backup Camera Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom