The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: BlackCable type: RoundCable length: 70mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 70m, black All components used must support this feature.
AV Parts Master
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: BlackCable type: RoundCable length: 50mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 50m, black All components used must support this feature.
AV Parts Master
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: WhiteCable type: RoundCable length: 15mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 15m, white All components used must support this feature.
AV Parts Master
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: WhiteCable type: RoundCable length: 70mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 70m, black All components used must support this feature.
AV Parts Master
The Logitech Tap Large Room Solution for Microsoft Teams is a turnkey collaboration system purpose built for professional conference rooms that host 12 or more participants. This all in one package seamlessly integrates Logitech 39;s premium Rally Plus video and audio hardware with the intuitive Tap touch controller and a pre configured mini PC, creating a reliable, user friendly meeting experience.Engineered specifically for Microsoft Teams Rooms, it enables one touch join, automatic participant framing, and effortless content sharing ideal for hybrid meetings and high impact presentations.Key Features: Rally Plus System Advanced Camera Audio Ultra HD PTZ Camera: Delivers crystal clear video with 15x HD zoom, 90 field of view, and automatic framing (RightSight). Modular Audio System: Includes two mic pods and dual speakers for broad audio coverage, scalable up to 7 mic pods for very large rooms. RightLight Technology: Enhances video quality by adjusting lighting and color balance to ensure all faces appear natural. Logitech Tap Touch Controller 10.1 quot; Capacitive Display: Anti glare, always on touchscreen with motion sensor activation. Clean Cabling: Single cable via Cat5e or optional Strong USB enables flexible installation across conference tables or walls. One Touch Meeting Join: Native Microsoft Teams interface for seamless meeting start and calendar integration. Pre Configured Mini PC (Intel NUC) Comes with Windows IoT and Microsoft Teams Rooms app pre installed. Mounted securely behind the display or under a desk with included mounting kit.
AV Parts Master
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: BlackCable type: RoundCable length: 10mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 10m, black All components used must support this feature.
AV Parts Master
The 39;celexon Professional electric height adjustable display trolley Adjust 42100MB 65cm 39; is a mobile, electric height adjustable trolley stand for displays with outstanding features at an unbeatable price.With a load capacity of up to 120kg and a mount for 42 100 39; displays with a Vesa standard of 800x600 mm, this display stand is ideal for various application scenarios. Thanks to its impressive stand height of over 175cm from the floor to the centre of the Vesa mount, you can reach a wide audience with your content. This makes the stand universally applicable in teaching and training facilities, at trade fairs as well as in offices and conference rooms. A large, adjustable height conveys your content even to the last rows.The high quality workmanship and sturdy construction ensure long lasting use. The anti collision function integrated in the electric columns stops the actuator should it hit e.g. furniture, thus protecting your display and objects underneath from major damage.The quick release system of the Vesa mount prevents accidental lifting of the display at any time.The electric columns, each with 800N power, are designed to be stable and smooth running and will move your equipment for many years.The robust chassis is made of powder coated steel and has large, easy running 100 mm castors in a colour that matches the stand. All 4 castors are lockable so the stand is always absolutely securely in place. Not standard, even in higher price ranges!The frame is designed to fit easily through standard door frames of 860 mm.4 high quality and robust 100 mm castors with locking function in trolley colourThe control element with 4 memory settings allows you to save different positions of your display, so that you can quickly set it up for different areas of use at any time. An integrated LED display informs you of the setting height from the 39;top edge of the chassis 39;.The USB port on the side of the display stand can be used to charge your accessories.A control element in a class of its ownThe 39;celexon Professional Display Trolley Adjust 42100MB 39; can be set up effortlessly with the tools provided and will be a loyal companion for many years.KEY INFORMATION Heavy duty rolling stand for (interactive) touch screen displays monitors up to 100 39;. Electrically height adjustable from 1110 mm 1760 mm (floor to centre of display holder) Extremely user friendly display holder thanks to suspension rails with quick clamping system Rear shelf for controller and power supply unit as well as smaller accessories The motor system is concealed in the slim lifting columns and offers an adjustment range of 65 cm Powerful and very smooth running motors with 1600N, at 38 mm feed per second highest safety due to integrated collision protection incl. cable control element with 4 memory memories and LED display of the set height of the columns USB charging port integrated on the side of the control unit Supports the following Vesa standards: Horizontal from 400 up to 800 mm (infinitely variable) Vertical up to 600 mm (100, 200, 300, 400, 500, 600 mm) Frame roller frame in RAL 9005 deep black powder coated fine structure Lifting columns RAL 9005 deep black powder coated smooth Maximum load 120 kg 1078 x 810 x 1420 2070 mm (WxDxH) Total system weight approx. 60 kg Highest stability even with large displays In the box 1x electrically height adjustable display trolley 1x control element with memory function The product is delivered disassembled in two packages. All packaging units are suitable for parcel service.
AV Parts Master
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: WhiteCable type: RoundCable length: 30mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 30m, White All components used must support this feature.
AV Parts Master