You've always wanted to output analog voltages from a microcontroller, the MCP4725 is the DAC that will let you do it! The CJMCU-MCP4725 is an I2C controlled Digital-to-Analog converter (DAC). A DAC allows you to send analog signal, such as a sine wave, from a digital source, such as the I2C interface on the microcontroller. Digital to analog converters are great for sound generation, musical instruments, and many other projects! This version of the CJMCU-MCP4725 Breakout fixes a few issues with the board including the IC footprint, the I2C pinout, changes the overall board dimensions to better fit your projects, and a few more minor tweaks. This board breaks out each pin you will need to access and use the MCP4725 including GND and Signal OUT pins for connecting to an oscilloscope or any other device you need to hook up to the board. Also on board are SCL, SDA, VCC, and another GND for your basic I2C pinout. Additionally, if you are looking to have more than one MCP4725 on a bus, the pull-up resistors on this board can be disabled just check the Hookup Guide in theDocumentssection below for instructions and tips on doing this. Material:pcb 12-bit resolution I2C Interface (Standard, Fast, and High-Speed supported) Small package 2.7V to 5.5V supply Internal EEPROM to store settings Due to different batches, there may be differences in product appearance and printed text, which will not affect use. Colour:As Shown Package Contents: 1 x module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
VVDI Prog Latest Update Information VVDI Prog 5.0.2 Update (2021-04-30). VVDI Prog V5.0.0 Update Information (2021-03-09). V5.0.1 VVDI Prog Update (2021-04-02). + Add VVDI PROG USER MUNUAL 5.0.0. VVDI PROG Connection for Maybach.
eBay
Auto detection of K-Line/CAN, and option to bypass and force preferred means of communication. Temporary bypass of immobiliser to allow flashing on the bench on ME7 systems. Boot mode support for ECU's with C167 and ST10 processors. EEprom read/write functions for some ECU's are included. For MEDC17 TPROT level checking without opening the ECU. 1. Please install on Win7 system 2. Please install driver well then open the software, or software can't be opened. Please make sure you use the driver from our CD, NOT use driver for other MPPS version. This module adds support for advanced functions on for ECU's. MPPS covers a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, for , for , for , for Delco, for , for Trionic and many others Fitment: For 6JF - Full Read / Write micro-type and EEprom over K-line. For 8DF - Full Read / Write micro-type and EEprom over K-line. For 8F2 - Full Read / Write micro-type and EEprom over K-line and CAN. For 8F3 - Full Read / Write micro-type and EEprom over K-line and CAN. For 8GM - Full Read / Write micro-type and EEprom over CAN. For 8GS - Full Read / Write micro-type and EEprom over CAN. For 5SF3 - Full Read / Write Flash and EEprom over CAN. For 5SF3 - Full Read / Write EEprom over K-Line. For 5SF8 - Full Read / Write Flash and EEprom over K-line and CAN. For 5SF9 - Full Read / Write Flash and EEprom over CAN. Material:ABS plastic colour:black Package Contents: 1 * MPPS V18.12.3.8 1 * Breakout Tricore Cable 1 * Connection Cable 1 * CD Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
It supports burning within this specification range. Condition: New.
eBay
Descrption: The modern interface that allows read and write memory from the car computer via the diagnostic connector.MPPS V13 Chip Tuning. The modern interface that allows read and write memory from the car computer via the diagnostic connector. Supports the latest drivers EDC16, EDC17, MED9.x, PPD1 / x, EDC15, ME7.xi much more ... Professional performance, without unnecessary boxes and cables. All electronics in OBD2 connector. Requires XP sp2. Features: Read / write flash Recalculation of checksum Tips: The product may be updated constantly, The Actual Product May Have Slight Differences Or Color Differences the color and appearance may be changed, please don't mind. And take a consideration before place the order if you have request for color or appearance. Material: ABS Color: As shown Package Contents: 1 x Car Programmer Cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
1pc x XHORSE Eeprom Clip Adapter. + Add CAT24C/W01(CLIP), CAT24C/W02(CLIP), CAT24C/W04(CLIP), CAT24C/W08(CLIP), CAT24C/W16(CLIP), CAT24C/W32(CLIP), CAT24C/W64(CLIP), CAT25C128(CLIP),CAT25C256(CLIP), CAT93C46[A](CLIP), CAT93C56[A](CLIP), CAT93C57[A](CLIP), CAT93C66[A](CLIP), CAT93C76[A](CLIP), CAT93C86[A](CLIP) options in<1-EEPROM&FLASH>-> (Need EEPROM CLIP ADAPTER).
eBay
Features: 1. Diagnostic via CAN and Special Function via K-Line.2. Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0.3. Manual definition of running diagnostic session C not like remaining diagnostic tools always standard diagnostic session 0x89. Function is under CAN-TP2.0.4. Broadcast diagnostic request disable normal communication, clear DTCs, Logistic (transport) mode. Functions are under CAN-TP2.0.5. Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, , BGW, . Functions are under CAN-TP2.0. Most of popular diagnostic requests identifications, coding, adaptations, DTCs. Functions are under CAN-TP2.0. K+CAN Commander Software version 1.4 Diagnostic Cable diagnose via CAN and Special function via K-Line;works for , for and for (CAN) , Models cover up to September 2006;Works for , Models cover up to 2007.Function:1.Odometer correction in instrument clusters and EDC15x.2.Read Security Access Code/Login WFS.3.Read/program immobilizer data.4.Read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K.5. MMI TV Activation.6.Read/Write EEPROM of Engine Control Units -EDC15x, -ME7.1.1, -Cartronic ME7.8, for .7.Key learning buttons for easy usage (not needed security code). Can do component security authorization.8.Key learning for (not needed security code) K+CAN.9.Custom memory reading from different units like ECUs, EZS-Kessy and xxxxx.10.Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with update will be possible programming of flash memories11.Crash data clear in unitsColour: BlackMaterial: ABSPackage Contents:1 x K+CAN Commander V1.4 Cable1 x CD DriverOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Surpport 25 SPI FLASH, 24 EEPROM, 25 EEPROM, 93 EEPROM,95 EEPROM.etc. Colour:As shown. 12 x Adapter.
eBay
1. Built-In High-Frequency Antenna, Corresponding To The Antenna Depth, Eliminates Blind Spots, And Reads The Entire Data Card Without Interruption. 2. Increase The Frequency Of Keystrokes, The Size Of The Card Can Hold Everything. The Data Analysis Is Completely Stable And The Error Rate Is Low. 3. The Low-Frequency Antenna Improves The Signal-To-Noise Ratio, The Recognition Speed Is Higher, And The Mobile Design Meets Needs. 4. No Antenna Interface, No Need To Connect, Easy To Damage. 5. It Is Simple And Convenient To Cancel The Lithium Battery. (In Offline Mode, You Can Use The Power Bank) Material: PC+Metal colour: black Package Contents: 1 x RFID Card Reader Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
1x USB cable. Inflatable Boat Rib 3 Step Boarding Ladder Safety Accessories for Speedboat. Support the PC software and programming device firmware upgrade.
eBay
Features: 1. Diagnostic via CAN and Special Function via K-Line.2. Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0.3. Manual definition of running diagnostic session C not like remaining diagnostic tools always standard diagnostic session 0x89. Function is under CAN-TP2.0.4. Broadcast diagnostic request disable normal communication, clear DTCs, Logistic (transport) mode. Functions are under CAN-TP2.0.5. Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, , BGW, . Functions are under CAN-TP2.0. Most of popular diagnostic requests identifications, coding, adaptations, DTCs. Functions are under CAN-TP2.0. K+CAN Commander Software version 1.4 Diagnostic Cable diagnose via CAN and Special function via K-Line;works for , for and for (CAN) , Models cover up to September 2006;Works for , Models cover up to 2007.Function:1.Odometer correction in instrument clusters and EDC15x.2.Read Security Access Code/Login WFS.3.Read/program immobilizer data.4.Read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K.5. MMI TV Activation.6.Read/Write EEPROM of Engine Control Units -EDC15x, -ME7.1.1, -Cartronic ME7.8, for .7.Key learning buttons for easy usage (not needed security code). Can do component security authorization.8.Key learning for (not needed security code) K+CAN.9.Custom memory reading from different units like ECUs, EZS-Kessy and xxxxx.10.Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with update will be possible programming of flash memories11.Crash data clear in unitsColour: BlackMaterial: ABSPackage Contents:1 x K+CAN Commander V1.4 Cable1 x CD DriverOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Great condition! Comes with original documents, power supply, and some extras.
eBay
1.Built-in high-frequency antenna, antenna depth matching, blind spots, read the whole card data flowing without interruption. 2.Increase Parse key rate , the size of the card takes all. 3.Sniffing data, complete stable, low error rate. 4.The low frequency antenna to improve the signal to noise ratio, the higher the recognition rate. 5.No antenna interface, not need to plug. Because it is easy to damaged. Power by Usb port, simple and convenient. (can use mobile power supply) Warning: This does NOT have quick-swappable/detachable antennae. It is built on the Easy platform, and has 512K flash EEPROM, so you can flash the latest / firmware.This requires some knowledge to flash firmware and operate. You will need a computer and be comfortable running terminal line commands to use the Proxmark 3. EEPROM 512K: AT91SAM7S512 controller means you can install latest and greatest firmware.Proxmark 3 Easy , 125 khz/ 134.2 Khz/ 13.56 Mhz. Support LF chip: such as T55xx, EM4100, -B Animal Tag, H-ID. Support HF chip, such as MF 1k, 4K, etc,This comes with 10 Cards. 2 x T5577 ID card, 2x S50 IC card, 2x UID IC card, 2x CUID IC card, 2x S50 IC key tag. and portable. :PM3 Easy 3.0 512K Working Voltage: 3.5- 5.5V Working current: 50-130m Thickness: 1.6cm note:(Some accessories style are random,don't accept the specified) Colour:Photo Color Material:plastic Size:8.8x5.5 x1.6cm Package Contents: 1 x Proxmark3 V3.0 DEV Easy 512 Module 1 x USB Data Cable 2 x 13.56Mhz 1 S50 PVC Card 2 x 13.56Mhz UID PVC Card 2 x 13.56Mhz CUID PVC Card 2 x 13.56MHz RFID Key IC Tag (Blue) 2 x 125Khz x T5577 ID PVC Card Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Kit 1: EZP2019+2 simple sop8/16 socket+usb cable +CD software. Kit 2: Ezp2019+2 simple sop8/16 socket+sop16 300mil+sop8 200mil/150mil socket+usb cable +CD software. Kit 3: Ezp2019+2 simple sop8/16 socket+sop16 300mil+sop8 200mil/150mil socket+usb cable +1.8V adapter+Sop 8 flash clip +CD software.
eBay
Handheld shape design, comfortable hand feeling and high quality. 2 buttons for simple operations. Standalone operation, no need to connect with computer / PC, easy to use. Built-in individual LED lights and buzzer indicator. Reading distance is 0 - 6cm. Can only copy 125KHz RFID card, Compatible with T5577, 5200, EM4305 ,EN4305. Parameter: Read: 125KHz ID (EM4100 TK4100 etc) cards or keys Write: 5200/EM4305/T5577/8310/8268 etc cards or Keys Built-in: individual LED lights and buzzer indicator, transceiver antenna Power Supply: 3V (2 x AAA battery) not included. you can buy battery on your side Times: Read / Write 20000 times Note: undergo testing before shipment to . If not read the card, the card should be belong to the not supportable type card. If not write the card, the card should be belong to the not supportable type card or not writable type card. Above two status, they are not the device's problems, please note that. Due to different batches, there may be differences in product appearance, color, and printed text, which will not affect the use. Type:125Khz RFID Card Reader+3 Keyfobs+2 Cards Kit Colour:Blue Material:Plastic Package Contents: 1 * RFID Card Reader Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Kit 1: EZP2019+2 simple sop8/16 socket+usb cable +CD software. Kit 2: Ezp2019+2 simple sop8/16 socket+sop16 300mil+sop8 200mil/150mil socket+usb cable +CD software. Kit 3: Ezp2019+2 simple sop8/16 socket+sop16 300mil+sop8 200mil/150mil socket+usb cable +1.8V adapter+Sop 8 flash clip +CD software.
eBay