Adblueobd2 For Man Euro 6 Truck Scanner Adblue Emulator Euro6 For Trucks with NOX sensor With Adblue /9 in 1, Adblueobd2 Emulator for MAN Euro6 EURO6 AdBlue Emulators Disable System: AdxBlue system (Fully) AdxBlue NOX sensor, DPF system, DPF temperature sensors, DPF regeneration After installing Euro6 Emulator, you can remove: DPF sensors - YES, NOx sensor - YES (only in 't remove first NOx sensor !!!), Adblue temp. sensor (s) - YES, Adblue pump - YES, Adblue level sensor - YES, Adblue ECU - YES Kindly note: It is possible to disable AdxBlue system by installing an AdxBlue emulator (programmable device) into the vehicle. You can switch it on/off anytime. EURO6 AdBlue Emulators using guide: Emulator Man Euro 6 does not need to be learned. You install emulator under the metal cover of AdBlue Pump on the right side behind the cab, and disconnect plug from AdBlue Pump and connect emulator. , you need to remove the fuses: F894(Multisensor In AdBlue tank) F738 (+30 Signal of AdBlue pump) F1084 (NOx sensor Upstream) Fuse F737 is now fuse of emulator. Fuse F1109 is the fuse of NOx sensor Downstream and A1191 mufler temperature sensor. This sensor needs to work correctly for DPF regeneration. Finally you need to remove Power from NOx downstream sensor. There are two ways , one is to cut pin 1 in NOx sensor plug, the other way (better) is to remove pin 10 in X3212 plug. This plug is visible on rear of engine on the right side. This is TE plug (16 pin) with yellow key. Color: As Shown Material: plastic Package Contents: 1 x Emulator for MAN Euro 6 Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Notice:1. Please install on Win7 32bit 64bit English system 2. Please install driver well then open the software, or software can't be opened. Please make sure you use the driver from our CD, NOT use driver for other MPPS version.This module adds support for advanced functions on ECU's. MPPS covers a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, , , , Delco, , Trionic and many others Auto detects ECU and processor type. No need to select from list, everything is automatic! Read/Write of all memories Eeprom, Irom, Xrom (where possible),Patch function for OBD Flashing of TPROT ECU's (supports only at the moment),TPROT / check feature, for testing if TPROT is active without opening ECU. Supports TP12,Supports (current only for ECU's without password protection),Support for unlocking of Simos and Simos 8. Checksum Correction supported for MEDC17. The MPPS is a powerful programming tool. It offers general reading / writing operations and checksum support, however it also includes some additional features: Excellent recovery functions. In some cases MPPS can recover ECU's which others tools can not even make communications with. On certain controllers it even works when with no program is present (a blank memory). Selectable full / partial reading and writing when the ECU allows this function. Selectable reading / writing speed. Writing "changes only" function for faster programming (when supported by the ECU). Auto detection of K-Line/CAN, and option to bypass and force preferred means of communication. Temporary bypass of immobiliser to allow flashing on the bench on ME7 systems. Boot mode support for ECU's with C167 and ST10 processors. EEprom read/write functions for some ECU's are included. MEDC17 TPROT level checking without opening the ECU. colour:black Material:ABS Package Contents: 1 x MPPS V18.12.3.8 1 x Breakout Tricore cable 1 x Pinout Cable 1 x CD Software Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
1. 72Mhz 32-bit processor. USB 2.0 device (USB-A/Mini cable included) 2. Field upgradeable software. Supports these major OBD protocols:CAN 2.0 (CAN/ISO15765) and K-line (ISO9141/ISO14230(KWP2000)/dual K line) 3. PassThru support with Windows . Standalone datalogs to microSD / microSDHC card without a laptop 4. to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector 5. to log from Motorsports 2.5mm stereo data bus. RGB status For ecu flash you can get from this list: US Domestic Market Vehicles currently supported by EcuFlash Make Model Year(s) Compatible OpenPort Interfaces Init Connector Needed? For 2001-2002 1.2 1.3S 1.3U 2.0 2001-2002 2003-2005 1.2 1.3S 1.3U 2.0 2003-2005 2006-2007 1.2 1.3S 1. 2.0 2008-2009 2.0 2004-2007 1.2 1.3S 1. 1.3U 2.0 2008-2009 2.0 2.5RS 2005 1.2 1.3S 1. 1.3U 2.0 2.5i 2005-2006 1.2 1.3S 1. 1.3U 2.0 2007-2009 2.0 Forester 2.5 2005-2006 1.2 1.3S 1. 1.3U 2.0 2007-2009 2.0 Forester 2004-2006 1.2 1.3S 1. 1.3U 2.0 2007-2009 2.0 Legacy / 2.5i / 3.0r 2005-2006 1.2 1.3S 1. 1.3U 2.0 2007-2009 2.0 Legacy GT / 2004-2006 1.2 1.3S 1. 1.3U 2.0 2007-2009 2.0 For 5 1. 1.3U 2.0 Mitsu (for 2.0 only) 6 1. 1.3U 2.0 Mitsu (for 2.0 only) 7 1. 1.3U 2.0 Mitsu (for 2.0 only) 8 1. 1.3U 2.0 Mitsu (for 2.0 only) 9 1. 1.3U 2.0 Mitsu (for 2.0 only) 10 2.0 (all 2nd Gen) 1996-???? 1. 1.3U 2.0 Mitsu (for 2.0 only) Eclipse GS/GT 2001-2003 1. 1.3U 2.0 Mitsu (for 2.0 only) OZ 2002-2004 1. 1.3U 2.0 Mitsu (for 2.0 only) color:As shown Material:ABS Package Contents: 1 x 2.0+ECUFLASH Cable 1 x USB Cable 1 x CD(The appearance is random, you cannot choose a specific appearance) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
1. 72Mhz 32-bit processor. USB 2.0 device (USB-A/Mini cable included) 2. Field upgradeable software. Supports these major OBD protocols:CAN 2.0 (CAN/ISO15765) and K-line (ISO9141/ISO14230(KWP2000)/dual K line) 3. PassThru support with Windows . Standalone datalogs to microSD / microSDHC card without a laptop 4. to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector 5. to log from Motorsports 2.5mm stereo data bus. RGB status LEDs For ecu flash you can get from this list: US Domestic Market Vehicles currently supported by EcuFlash Make Model Year(s) Compatible OpenPort Interfaces Init Connector Needed? For 2001-2002 1.2 1.3S 1.3U 2.0 2001-2002 2003-2005 1.2 1.3S 1.3U 2.0 2003-2005 2006-2007 1.2 1.3S 1. 2.0 2008-2009 2.0 2004-2007 1.2 1.3S 1. 1.3U 2.0 2008-2009 2.0 2.5RS 2005 1.2 1.3S 1. 1.3U 2.0 2.5i 2005-2006 1.2 1.3S 1. 1.3U 2.0 2007-2009 2.0 Forester 2.5 2005-2006 1.2 1.3S 1. 1.3U 2.0 2007-2009 2.0 Forester 2004-2006 1.2 1.3S 1. 1.3U 2.0 2007-2009 2.0 Legacy / 2.5i / 3.0r 2005-2006 1.2 1.3S 1. 1.3U 2.0 2007-2009 2.0 Legacy GT / 2004-2006 1.2 1.3S 1. 1.3U 2.0 2007-2009 2.0 For 5 1. 1.3U 2.0 Mitsu (for 2.0 only) 6 1. 1.3U 2.0 Mitsu (for 2.0 only) 7 1. 1.3U 2.0 Mitsu (for 2.0 only) 8 1. 1.3U 2.0 Mitsu (for 2.0 only) 9 1. 1.3U 2.0 Mitsu (for 2.0 only) 10 2.0 (all 2nd Gen) 1996-???? 1. 1.3U 2.0 Mitsu (for 2.0 only) Eclipse GS/GT 2001-2003 1. 1.3U 2.0 Mitsu (for 2.0 only) OZ 2002-2004 1. 1.3U 2.0 Mitsu (for 2.0 only) color:As shown Material:ABS Package Contents: 1 x 2.0+ECUFLASH Cable 1 x USB Cable 1 x CD(The appearance is random, you cannot choose a specific appearance) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
If everything in the transmission and clutch packs are mechanically working properly and you can manually hand shift the transmission thru all the gears with the shift nub and tool under your this kit will force shift the transmission regardless of shift code being displayed. Does not require any modification to the ATV or wire harness and can be removed and saved for a later time for diagnostics or emergencies or on the trail repairs. Does not require any or computers utilizes common for style relays found at any parts are not needed for a constant mesh style hydraulic transmissions bypass not for use on hydraulic style transmissions like and . Quickly diagnose mechanical clutch or transmission failures by isolating the ESP electrical system from mechanical problems that can cause ES shift codes quickly and without ever pulling the clutch cover. One " style" relay controls the up shift the other relay controls the down shift while using your known good tested factory left handle bar up / down switches and a good or tested shift motor, and good healthy battery. kits are made from quality components and professional construction, you will be pleased with quality of products. and High Quality Fits: For only 1998-2004 Foreman 450 ES Fits all Te Fe and Es models Note:Eliminates the need for angle sensors, speed sensors, shift computer, ECU, forward/reverse sensor, and the sensor and even the main wire harness. Installation: The kit plugs directly inline with your factory left handlebar up/down GREEN 10 Wire matching connector goes up front under front on front frame rail then plug in the shift motor to the matching kit factory plug. Then connect battery to terminals. Converts the ESsystem into a manual electric shift controlled transmission and will now function the same as a foot shift model would with the ease of the touch of a button for a "On " shift style. Also great for older electric shift ATV equipped with computer controlled ESP needing expensive or unavailable parts, or may have oversized tires or gear reduction installed confusing the shift computer and speed sensor not allowing the computer to allow it to shift. Only needs a Good Battery, Shift Motor, and up / down shift buttons on the left controller. colour: black Material: ABS Package Contents: 1 set x Angle Sensor Computer Harness Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
The new K-TAG is 100% J-Tag compatible, but in a completely different way. Usually J-Tag programmers are available only for big productions, never present in chiptuning devices. Using only the essential components, have merged J-Tag, for BDM/ and Bootloader for /ST communication lines into a single product. K-TAG works in perfect harmony. Learn how to use K-TAG takes almost no time, because all the communication protocols operate along similar principles. Once you have learned to use a protocol, you will naturally use all the others. Knows what it means to work in motion. For this reason the research methods of the protocols and choice of vehicles are detailed and ordered. Top 8 reasons to get KTAG V7.020:1.Software Version V2.23, Firmware Version V7.020,2. Add ECU Type: 76FXXX, 17.4.4, E83, 17.5.5 (1766), - 276ECU, 76F, and so on, at least 160 more ECU Types added.3. No tokens limitation 4. Ktag V7.020 can connect internet without damage,5. Multi-Language: English, Italian, German, French, Portuguese, Spanish,6. Support BDM Function Well, No Checksum Error. 7. It supports universal famous car,truck, tractor,bike.8. PCB With filters ( The main program and SD card file is different from ktag v6.070 ) is model and ecu list for ktag v7.020 add more 160 types than KTAG V6.70: TYPE BRAND ECU ECU_TYPE K-TAG Car for DCM3.5 244 Car for DCM3.5 244 Car for DCM3.5 248 Car for DCM3.5 - CRD2 248 Car for 7GF 247 Car for 8DS 364 Car for 8GMF 243 Car for 8GMF 243 Car for 8GMF 243 Car for 8GSF 243 Car for 8GSF 243 Car for MJ8DF Car for MJ8DF Car for MJ8DF Car for MJ8DF Car for MJ8DF Car for MJ8F3 382 Truck for TRUCKS EMS2 246 Car for DCM3.4 257 Car for DCM3.4 257 Car for DCM3.4 258 Car for DCM3.4 258 Car for DCM3.4 258 Car for DCM3.4 362 Car for 057L1 370 Car for Mitsubsh RA6 319 colour:Red+black Material:ABS Package Contents: 1 x Ktag V7.020 Main Unit 1 x 144300T 104 1 x 144300T 103 1 x 144300T 101 1 x 144300T 106 1 x 144300T 102 1 x 144300T 105 1 x 144300T 100 3 x Chips Inside 1 x Multi-Color Cable 1 x USB Cable 1 Adapter 1 x CD Only the above package content, other are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
1. Auto detects ECU and processor type. No need to select from list, everything is automatic! 2. Read/Write of all memories Eeprom, Irom, Xrom (where possible) 3. Patch function for OBD Flashing of TPROT ECU's (supports only at the moment) 4. TPROT / check feature, for testing if TPROT is active without opening ECU.5. Supports For TP12, For (current only for ECU's without password protection), For unlocking of Simos and For Simos MPPS V21 ECU List:This module adds support for advanced functions on for ECU's. MPPS covers a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, for Delph i, for , for , for Delco, for , for Trionic and many others For 6F3- Full Read / Write Micro-type, Flash and EEprom over K-line and CAN. For 6JF - Full Read / Write Micro-type and EEprom over K-line. For 8DF - Full Read / Write Micro-type and EEprom over K-line. For 8F2 - Full Read / Write Micro-type and EEprom over K-line and CAN. For 8F3 - Full Read / Write Micro-type and EEprom over K-line and CAN. For 8GM - Full Read / Write Micro-type and EEprom over CAN. For 8GS - Full Read / Write Micro-type and EEprom over CAN. For 5SF3 - Full Read / Write Flash and EEprom over CAN. For 5SF3 - Full Read / Write EEprom over K-Line. For 5SF8 - Full Read / Write Flash and EEprom over K-line and CAN. For 5SF9 - Full Read / Write Flash and EEprom over CAN. For ME7.9.10 - Full Read / Write Micro-type over CAN. For ME7.6.3 - Full Read / Write Micro-type over CAN. For 6O2 - Full Read / Write Micro-type, Flash and EEprom over K-line and CAN. For 6O3 - Full Read / Write Micro-type, Flash and EEprom over K-line and CAN. For 6JO - Full Read / Write Micro-type and EEprom over K-line. Colour:black Material:ABS The actual product may have slight color difference or difference, which not affect the use Package Contents: 1 x Code Scan Tools Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
OBD2A to OBD1 ECU Jumper Conversion Harness Adapter for / for This harness adapter will allow you to use an older OBD1 1992 to 1995 ECU ( 1992 to 1995 computer) in your newer 1996+ for or for vehicle. Notes: This harness adapter is designed for use with manual transmission only. It is not designed for use with an automatic transmission. Fitment: for 1996-1999 for for 1996-1998 for for / Del Sol for 1996-2001 for Prelude for 1996-1997 for for Accord to run any OBD1 1992-1995 ECU Colour: black + red Material: plastic Package Contents: 1 x OBD2A to OBD1 Jumper Conversion ECU Harness Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom