1. Support A acceleration ESP32-S3MCU adds vector instructions for accelerating neural network calculations and signal processing. developers use these vector instructions through the ESP- and ESP-NN libraries to achieve high-performance image recognition, voice wake-up and recognition applications. ESP-WHO and ESP-Skainet also support this feature. 2. ESP32-S3 has 45 programmable GPOs and common peripheral interfaces such as SP|, 125l2C, PWM, , ADC, UART, SD/MMC host controller and TWAITM controller. Fourteen of these GPOs can be configured as capacitive touch inputs for HM interaction. In addition, ESP32-S3 is equipped with an ultra-low power coprocessor (ULP), supports multiple low power modes, and is widely applicable to low power application scenarios 3. ESP32-S3 integrates 24GHz W-Fi (802.11b/g) and supports 40MHz bandwidth; its low-power Bluetooth subsystem supports Bluetooth5 (LE) and Bluetooth mesh, and can realize long-distance communication through Coded phy and broadcast extension. It also supports 2 Mbps Phy for increased transfer speed and data throughput. ESP32-S3's Wi-Fi and Bluetooth le radio frequency performance is superior, and it can work stably at high temperatures. Type: ESP32-S3 core board Model: ESP32-S3 core board Dual-core 32-bit LX7 CPU, Frequency up to: 240MHZ Operating voltage: 3 volts to 3 volts. Colour:black Material:plastic Size:2.7 x 5.7cm Package Contents: 1 x ESP32-S3 core board Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
The ESP32 chip has 32 GPIO pins with support for I2C, I2S, SPI and UART. In addition it has multiple analog to digital channels and digital to analog, hardware accelerated encryption, pulse width modulation, capacitance touch interfaces and a lot more.
eBay
ESP32-based RGB LED(SK6812) Programmable button Built-in Infra-red,Extendable Pins & Holes Program Platform: for , for UIFlow Atom Lite, which has a size of only 24x24mm, is a very compact development board development kit series. It provides more GPIOs for user customization which is very suitable for embedded smart home devices and in making smart toys. The main control adopts the ESP32- chip which comes integrated with Wi-Fi technologies and has a 4MB of integrated SPI flash memory. Atom Lite board provides an Infra-Red LED, a RGB LED, buttons, and a HY2.0 interface. In addition, it can connect to external sensors and actuators through 6 GPIOs. The on-board Type-C USB interface enables rapid program upload and execution. Flash:4MB input voltage:5V @ 500mA host interface:TypeC x 1, HY2.0(I2C+I/0+UART) x 1 PIN interface:G19, G21, G22, G23, G25, G33 RGB LED:SK6812 3535 x 1 AND:Infrared transmission button:Custom button x1 antenna:2.4G 3D Antenna working temperature:32 to 104(0 to 40) Host size:24 x 24 x 10 mm weight:12g Applications:Internet of things terminal controller,IoT node, Wearable peripherals The product appearance and printed words depending on the batch, but this does not affect use. Colour:As Shown Material:pc Package Contents: 1 x ATOM Lite Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
WiFi and Bluetooth-compatible Features: The ESP32 module is a versatile WiFi+BT+BLE MCU module that supports both low-power Bluetooth-compatible and WiFi connectivity, providing wide application potential.
eBay
Suitable for DDSM series hub motors such as DDSM115 and DDSM210, onboard 4-ch DDSM115 motor interfaces and 4-ch DDSM210 motor interfaces Provides DDSM hub motor control demo and SDK, easy to use Supports multiple wired and wireless communication modes, supports JSON interaction for easier control Supports connecting to , powering the Pi via integrated 5V buck regulator circuit and communicating through GPIO UART interface, neat cable management Integrated WEB application for controlling and setting the DDSM hub motors, more convenient for debugging DDSM Hub Motor Driver Board Designed For DDSM Series Hub Motors, Integrates ESP32 And Control Circuit Provides WEB Application Demo, JSON Interaction Demo And Hub Motor SDK For Secondary Development Suitable for driving DDSM series hub motors and obtaining feedback information The host controller can control the hub motors by sending JSON commands and obtain feedback information in JSON format, easy to use, more convenient for secondary development Multiple communication methods for easy integration into robotics projects Colour:black Material:PC Due to different product batches, the appearance , which does not affect the use Package Contents: 1 * WiFi Wireless ESP32 DDSM Motor Driver HAT Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
The ESP32 is a versatile chip designed for efficient Wi-Fi and Bluetooth including BLE. The ESP32 chip has 30 GPIO pins with support for I2C, I2S, SPI and UART. In addition it has multiple analog to digital channels and digital to analog, hardware accelerated encryption, pulse width modulation, capacitance touch interfaces and a lot more.
eBay
Note: Due to different factory batches, slight differences in appearance not affect usage. Quantity:1Pack Colour:As Shown Material:PVC Package Contents: 1 * OV2640 Camera Module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
The ESP32 chip has 30 GPIO pins with support for I2C, I2S, SPI and UART. In addition it has multiple analog to digital channels and digital to analog, hardware accelerated encryption, pulse width modulation, capacitance touch interfaces and a lot more.
eBay
1. wifi function expansion, default flash ESP32Marauder firmware, support SD card storage data 2. 2.4G module extension, supports NRF sniffer and mouse hijacker functions 3. High gain CC1101 module, ultra-wideband signal sending and receiving distance Applicable models:Suitable for Flipper zero Shipping content: 1. A multi-function expansion board 2. 2.4/5Ghz dual-band glue stick antenna 3. 40Mhz-6Ghz broadband telescopic antenna Colour:As Shown Material:ABS Package Contents: 1 set * expansion modules Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
The ESP32 pin integrated on the board has been led out for easy connection and use. Or 1 antenna. Or WROOM-32U+antenna.
eBay
M5StickC PLUS2 is powered by ESP32-PICO-D4 with Wi-Fi and is an upgrade of the M5StickC with a bigger screen .It is a portable, easy-to-use, open source, IoT development board. This tiny device will enable you to realize your ideas, enrich your creativity, and speed up your IoT prototyping. Developing with M5StickC PLUS takes away a lot of the pains from the development process. M5StickC Plus is one of the core devices in M5Stacks product series. The compact body is integrated with rich hardware resources, such as infrared, RTC, Microphone, LED, IMU, Buttons, PMU,etc Power switch operation: Power on: Press power button for 2 seconds Power off: Press power button for 6 seconds Product Features ESP32-based support Wi-Fi Built-in 6-Axis IMU Red LED IR mitter Microphone RTC Buttons, LCD(1.14 inch) Built-in Lithium Polymer Battery Extendable Socket Built-in Passive Buzzer Wearable & Wall mounted Compatible with multi-platform development Applications Internet of things terminal controller Wearable devices Stem education product DIY creation ESP32: 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi Flash Memory: 4MB Power Input: 5V @ 500mA Port: TypeC x 1, GROVE(I2C+I/0+UART) x 1 LCD screen:1.14 inch, 135*240 Colorful TFT LCD, ST7789v2 Button: Custom button x 2 LED: RED LED MEMS: MPU6886 Buzzer:built-in buzzer IR: Infrared mission MIC:SPM1423 RTC:BM8563 PMU:AXP192 Battery: 120 mAh @ 3.7V Antenna: 2.4G 3D Antenna PIN port: G0, G25/G36, G26, G32, G33 Operating Temperature: 0°C to 60°C Tips: The product may be updated constantly ,Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use Colour:Photo Color Material:plastic Package Contents: 1 x Graphical Programming Kit Only
Fruugo United Kingdom
It has a similar pin layout to the conventional Mini ESP8266-12F and is therefore pin-compatible with most accessories for it. ADC channels 18. DAC channels 2. ADC Resolution 12-bitCommunications interfaces SPI, I2C, CA.
eBay
for Arduino: Click "File" in the upper left corner → Preferences → Additional Development → Board Manager URL → Enter the URL in the input box. (ESP32S3 is a chip, and the SDK version needs to be version 2.0.3 or above) https: //raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json Click OK and the software will be installed by itself. After installation, restart for the Arduino IDE software. Search for ESP32 in Tools→Board Manager and install for ESP32-Arduino SDK Copy all files in the lib folder for to /Arduino/libraries Select the settings as shown. Note that the FLASH size partition and size may be modified depending on T-embed color: B-Fully transparent button, shell size: 9.6 x 3.9 x 1.1cm Material: plastic colour: As shown Package Contents: 1 x T-Embed 1 x IDC3 Simple Horn Seat 2.54 8pin 1 x Pin Header 5 Pin 1 x Battery Cable 1 x Flex Cable 2.54 8pin 10cm 1 x Flex Cable 6pin Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Note there is a notch in the lid to align with the case so that you get the lid on the right way around. Hobby Stuff used this model as a start point for the case and resized it to fit this specific ESP32 model.
eBay
HT-CT62 is a LoRa/LoRaWAN node module with a long communication range, low power consumption, high sensitivity, and low cost. The module is composed of ESP32-C3FN4 (32-bit microprocessor based on RISC-V architecture) and LoRa Transceivers (SX1262). The module integrates 2.4 GHz Wi-Fi and LoRa two-mode wireless communication. HT-CT62 is a small volume, stamp hole package module, it's the for smart cities, smart farms, smart homes, and IoT makers. Colour:As Shown Material:PCB+Metal Specification:863-928MHz Due to different batches, there may be differences in product appearance and printed text, which not affect use Package Contents: 1 * LoRa Node Module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
· Compatible with LOLIN D1 mini shields. • Generic Low-power IoT Sensor Hubs. • Generic Low-power IoT Data Loggers. · 4MB Flash. · based ESP32-S2FN4R2 WIFI IC. – Baby monitors. – Health monitoring. • Health Care Applications.
eBay