Note: Since the logistics rejects all items with batteries, we can only remove the battery from the remote control. After receiving the packaging, please purchase the remote control battery yourself, we apologize for this! The battery specification is 3V button cell of CR2032/A27 Package Included: Or 1x LCD Switch & Remote Or1x Mother Board Or1x Wire harne Or 1x Remote Or3PCS SET1x LCD Switch & Remote &1x Mother Board Or 5PCS SET1x LCD Switch & Remote &1x Mother Board1xWire harne 1x Temp sensor Specification: Color:like the pictrue show Remote distance: Within 10m Voltage: 12V/24V LCD Connectorpin: 3 PinsTriangle Plug Remote Control: 4 Button Battery: 1PC 27A12V, INCLUDED. Fitment: For 3KW 5KW 8KW Air Diesel Parking Heater Important Note: 1. There is a transparent plastic protective film on the screenthatcan be removed before using. 2.If your original motherboard and controller look the same as ours, all black plugs. then you can buy a motherboard or a controller to replace your broken one. If your original motherboard and controller are different from ours, you need to buy motherboard and controller together to replace your broken ones. Or it will not fit for your heater. 3.The remote keyonly fit for our controller and motherboard. If you need to buy a set of controller, remote key and motherboard, please choose 3PC SET. If only LCD Switch & Remote is selected, the motherboard is not included; if only Mother Board is selected, the controller and remote key are not included. Please don't make a wrong order! ! ! Please don't make a wrong order! ! ! Please don't make a wrong order! ! ! Remote Control To Codeinstruction: 1. Preing the up button to hold more than 3 seconds while in the off setting state. 2.Entering the remote control to the code interface until displayingHFR-. 3. Preing theup buttonof theremote to launch the remote code. 4. Theheateris on after the remote code disappear, or it won't turn on if the code failed. 5. The code will automatically exit when it is over time. The parameter setting proce (pre the setting key to enter the setting state) 1 Time setting:Pre the up or down key to adjust the parameters, set the hour (24-hour clock), minutes and other parameters in turn, pre the enter key to confirm the parameters, and enter the next item. 2 Timing power-on setting:default off, display 1oF pre the up key to turn on display 1oN, pre the enter key to enter, set the hour and minute in turn. Timing is a countdown mode, up to 99 hours and 59 minutes. 3 Timed shutdown setting:default off, display 2oF pre the up key to turn on display 2oN, pre the enter key to enter, set the hour and minute in turn. Timing is a countdown mode, up to 99 hours and 59 minutes. Management paword input:Pre the up and down keys to adjust. When the correct value appears, pre the confirm key to enter the next digit. After the 4-digit paword is entered correctly, pre the confirm key to enter the next item. If the input is wrong, it will return to waiting for the first digit to be entered. . There is no need to modify subsequent data, pre the SET button until exiting, or wait for 10 seconds to exit automatically. 4Pump oil volume setting:Pre the up or down key to modify the minimum pump oil volume. After reaching the required value, pre the confirm key to enter the maximum oil volume setting; pre the up or down key to modify the maximum pump oil volume. After reaching the required value , pre the enter key to enter the next item. 5 Fan speed setting:pre the up or down button to modify the minimum fan speed, after reaching the required value, pre the enter button to enter the maximum speed setting; pre the up or down button to modify the maximum fan speed, after reaching the required value, pre the enter button Go to the next item. 6 Working voltage setting:The working voltage of the motherboard can only be selected in the shutdown state. Pre the up or down key to switch and set the working voltage, adjust the 12V system to display U-12, The 24V system is adjusted to show that U-24 has completed the release. Pay attention to check whether the oil pump, motor and ignition plug of the machine are matched before starting the machine to avoid damage. 7 Speed signal selection:display 5N-1 Pre the up or down key to set the speed signal, select 5N-2 if the two magnets of the impeller have the same polarity, and select 5N-1 when the polarity of the magnets is different or there is only one magnet (default value) If this parameter is selected incorrectly, the speed will be doubled. 8 Ignition plug power selection:display PF-5 Pre the up or down button to modify the value (1=35W , 2=40W , 3=45W , 4=80W , 5=85W , 6=90W) The default value is 5. It is recommended to use the default value, or modify it after verification. 9 Management paword modification:Initially display the oF state, pre the confirm key to skip
Fruugo United Kingdom
Note: Since the logistics rejects all items with batteries, we can only remove the battery from the remote control. After receiving the packaging, please purchase the remote control battery yourself, we apologize for this! The battery specification is 3V button cell of CR2032/A27 Package Included: Or 1x LCD Switch & Remote Or1x Mother Board Or1x Wire harne Or 1x Remote Or3PCS SET1x LCD Switch & Remote &1x Mother Board Or 5PCS SET1x LCD Switch & Remote &1x Mother Board1xWire harne 1x Temp sensor Specification: Color:like the pictrue show Remote distance: Within 10m Voltage: 12V/24V LCD Connectorpin: 3 PinsTriangle Plug Remote Control: 4 Button Battery: 1PC 27A12V, INCLUDED. Fitment: For 3KW 5KW 8KW Air Diesel Parking Heater Important Note: 1. There is a transparent plastic protective film on the screenthatcan be removed before using. 2.If your original motherboard and controller look the same as ours, all black plugs. then you can buy a motherboard or a controller to replace your broken one. If your original motherboard and controller are different from ours, you need to buy motherboard and controller together to replace your broken ones. Or it will not fit for your heater. 3.The remote keyonly fit for our controller and motherboard. If you need to buy a set of controller, remote key and motherboard, please choose 3PC SET. If only LCD Switch & Remote is selected, the motherboard is not included; if only Mother Board is selected, the controller and remote key are not included. Please don't make a wrong order! ! ! Please don't make a wrong order! ! ! Please don't make a wrong order! ! ! Remote Control To Codeinstruction: 1. Preing the up button to hold more than 3 seconds while in the off setting state. 2.Entering the remote control to the code interface until displayingHFR-. 3. Preing theup buttonof theremote to launch the remote code. 4. Theheateris on after the remote code disappear, or it won't turn on if the code failed. 5. The code will automatically exit when it is over time. The parameter setting proce (pre the setting key to enter the setting state) 1 Time setting:Pre the up or down key to adjust the parameters, set the hour (24-hour clock), minutes and other parameters in turn, pre the enter key to confirm the parameters, and enter the next item. 2 Timing power-on setting:default off, display 1oF pre the up key to turn on display 1oN, pre the enter key to enter, set the hour and minute in turn. Timing is a countdown mode, up to 99 hours and 59 minutes. 3 Timed shutdown setting:default off, display 2oF pre the up key to turn on display 2oN, pre the enter key to enter, set the hour and minute in turn. Timing is a countdown mode, up to 99 hours and 59 minutes. Management paword input:Pre the up and down keys to adjust. When the correct value appears, pre the confirm key to enter the next digit. After the 4-digit paword is entered correctly, pre the confirm key to enter the next item. If the input is wrong, it will return to waiting for the first digit to be entered. . There is no need to modify subsequent data, pre the SET button until exiting, or wait for 10 seconds to exit automatically. 4Pump oil volume setting:Pre the up or down key to modify the minimum pump oil volume. After reaching the required value, pre the confirm key to enter the maximum oil volume setting; pre the up or down key to modify the maximum pump oil volume. After reaching the required value , pre the enter key to enter the next item. 5 Fan speed setting:pre the up or down button to modify the minimum fan speed, after reaching the required value, pre the enter button to enter the maximum speed setting; pre the up or down button to modify the maximum fan speed, after reaching the required value, pre the enter button Go to the next item. 6 Working voltage setting:The working voltage of the motherboard can only be selected in the shutdown state. Pre the up or down key to switch and set the working voltage, adjust the 12V system to display U-12, The 24V system is adjusted to show that U-24 has completed the release. Pay attention to check whether the oil pump, motor and ignition plug of the machine are matched before starting the machine to avoid damage. 7 Speed signal selection:display 5N-1 Pre the up or down key to set the speed signal, select 5N-2 if the two magnets of the impeller have the same polarity, and select 5N-1 when the polarity of the magnets is different or there is only one magnet (default value) If this parameter is selected incorrectly, the speed will be doubled. 8 Ignition plug power selection:display PF-5 Pre the up or down button to modify the value (1=35W , 2=40W , 3=45W , 4=80W , 5=85W , 6=90W) The default value is 5. It is recommended to use the default value, or modify it after verification. 9 Management paword modification:Initially display the oF state, pre the confirm key to skip
Fruugo United Kingdom
Note: Since the logistics rejects all items with batteries, we can only remove the battery from the remote control. After receiving the packaging, please purchase the remote control battery yourself, we apologize for this! The battery specification is 3V button cell of CR2032/A27 Package Included: Or 1x LCD Switch & Remote Or1x Mother Board Or1x Wire harne Or 1x Remote Or3PCS SET1x LCD Switch & Remote &1x Mother Board Or 5PCS SET1x LCD Switch & Remote &1x Mother Board1xWire harne 1x Temp sensor Specification: Color:like the pictrue show Remote distance: Within 10m Voltage: 12V/24V LCD Connectorpin: 3 PinsTriangle Plug Remote Control: 4 Button Battery: 1PC 27A12V, INCLUDED. Fitment: For 3KW 5KW 8KW Air Diesel Parking Heater Important Note: 1. There is a transparent plastic protective film on the screenthatcan be removed before using. 2.If your original motherboard and controller look the same as ours, all black plugs. then you can buy a motherboard or a controller to replace your broken one. If your original motherboard and controller are different from ours, you need to buy motherboard and controller together to replace your broken ones. Or it will not fit for your heater. 3.The remote keyonly fit for our controller and motherboard. If you need to buy a set of controller, remote key and motherboard, please choose 3PC SET. If only LCD Switch & Remote is selected, the motherboard is not included; if only Mother Board is selected, the controller and remote key are not included. Please don't make a wrong order! ! ! Please don't make a wrong order! ! ! Please don't make a wrong order! ! ! Remote Control To Codeinstruction: 1. Preing the up button to hold more than 3 seconds while in the off setting state. 2.Entering the remote control to the code interface until displayingHFR-. 3. Preing theup buttonof theremote to launch the remote code. 4. Theheateris on after the remote code disappear, or it won't turn on if the code failed. 5. The code will automatically exit when it is over time. The parameter setting proce (pre the setting key to enter the setting state) 1 Time setting:Pre the up or down key to adjust the parameters, set the hour (24-hour clock), minutes and other parameters in turn, pre the enter key to confirm the parameters, and enter the next item. 2 Timing power-on setting:default off, display 1oF pre the up key to turn on display 1oN, pre the enter key to enter, set the hour and minute in turn. Timing is a countdown mode, up to 99 hours and 59 minutes. 3 Timed shutdown setting:default off, display 2oF pre the up key to turn on display 2oN, pre the enter key to enter, set the hour and minute in turn. Timing is a countdown mode, up to 99 hours and 59 minutes. Management paword input:Pre the up and down keys to adjust. When the correct value appears, pre the confirm key to enter the next digit. After the 4-digit paword is entered correctly, pre the confirm key to enter the next item. If the input is wrong, it will return to waiting for the first digit to be entered. . There is no need to modify subsequent data, pre the SET button until exiting, or wait for 10 seconds to exit automatically. 4Pump oil volume setting:Pre the up or down key to modify the minimum pump oil volume. After reaching the required value, pre the confirm key to enter the maximum oil volume setting; pre the up or down key to modify the maximum pump oil volume. After reaching the required value , pre the enter key to enter the next item. 5 Fan speed setting:pre the up or down button to modify the minimum fan speed, after reaching the required value, pre the enter button to enter the maximum speed setting; pre the up or down button to modify the maximum fan speed, after reaching the required value, pre the enter button Go to the next item. 6 Working voltage setting:The working voltage of the motherboard can only be selected in the shutdown state. Pre the up or down key to switch and set the working voltage, adjust the 12V system to display U-12, The 24V system is adjusted to show that U-24 has completed the release. Pay attention to check whether the oil pump, motor and ignition plug of the machine are matched before starting the machine to avoid damage. 7 Speed signal selection:display 5N-1 Pre the up or down key to set the speed signal, select 5N-2 if the two magnets of the impeller have the same polarity, and select 5N-1 when the polarity of the magnets is different or there is only one magnet (default value) If this parameter is selected incorrectly, the speed will be doubled. 8 Ignition plug power selection:display PF-5 Pre the up or down button to modify the value (1=35W , 2=40W , 3=45W , 4=80W , 5=85W , 6=90W) The default value is 5. It is recommended to use the default value, or modify it after verification. 9 Management paword modification:Initially display the oF state, pre the confirm key to skip
Fruugo United Kingdom
Note: Since the logistics rejects all items with batteries, we can only remove the battery from the remote control. After receiving the packaging, please purchase the remote control battery yourself, we apologize for this! The battery specification is 3V button cell of CR2032/A27 Package Included: Or 1x LCD Switch & Remote Or1x Mother Board Or1x Wire harne Or 1x Remote Or3PCS SET1x LCD Switch & Remote &1x Mother Board Or 5PCS SET1x LCD Switch & Remote &1x Mother Board1xWire harne 1x Temp sensor Specification: Color:like the pictrue show Remote distance: Within 10m Voltage: 12V/24V LCD Connectorpin: 3 PinsTriangle Plug Remote Control: 4 Button Battery: 1PC 27A12V, INCLUDED. Fitment: For 3KW 5KW 8KW Air Diesel Parking Heater Important Note: 1. There is a transparent plastic protective film on the screenthatcan be removed before using. 2.If your original motherboard and controller look the same as ours, all black plugs. then you can buy a motherboard or a controller to replace your broken one. If your original motherboard and controller are different from ours, you need to buy motherboard and controller together to replace your broken ones. Or it will not fit for your heater. 3.The remote keyonly fit for our controller and motherboard. If you need to buy a set of controller, remote key and motherboard, please choose 3PC SET. If only LCD Switch & Remote is selected, the motherboard is not included; if only Mother Board is selected, the controller and remote key are not included. Please don't make a wrong order! ! ! Please don't make a wrong order! ! ! Please don't make a wrong order! ! ! Remote Control To Codeinstruction: 1. Preing the up button to hold more than 3 seconds while in the off setting state. 2.Entering the remote control to the code interface until displayingHFR-. 3. Preing theup buttonof theremote to launch the remote code. 4. Theheateris on after the remote code disappear, or it won't turn on if the code failed. 5. The code will automatically exit when it is over time. The parameter setting proce (pre the setting key to enter the setting state) 1 Time setting:Pre the up or down key to adjust the parameters, set the hour (24-hour clock), minutes and other parameters in turn, pre the enter key to confirm the parameters, and enter the next item. 2 Timing power-on setting:default off, display 1oF pre the up key to turn on display 1oN, pre the enter key to enter, set the hour and minute in turn. Timing is a countdown mode, up to 99 hours and 59 minutes. 3 Timed shutdown setting:default off, display 2oF pre the up key to turn on display 2oN, pre the enter key to enter, set the hour and minute in turn. Timing is a countdown mode, up to 99 hours and 59 minutes. Management paword input:Pre the up and down keys to adjust. When the correct value appears, pre the confirm key to enter the next digit. After the 4-digit paword is entered correctly, pre the confirm key to enter the next item. If the input is wrong, it will return to waiting for the first digit to be entered. . There is no need to modify subsequent data, pre the SET button until exiting, or wait for 10 seconds to exit automatically. 4Pump oil volume setting:Pre the up or down key to modify the minimum pump oil volume. After reaching the required value, pre the confirm key to enter the maximum oil volume setting; pre the up or down key to modify the maximum pump oil volume. After reaching the required value , pre the enter key to enter the next item. 5 Fan speed setting:pre the up or down button to modify the minimum fan speed, after reaching the required value, pre the enter button to enter the maximum speed setting; pre the up or down button to modify the maximum fan speed, after reaching the required value, pre the enter button Go to the next item. 6 Working voltage setting:The working voltage of the motherboard can only be selected in the shutdown state. Pre the up or down key to switch and set the working voltage, adjust the 12V system to display U-12, The 24V system is adjusted to show that U-24 has completed the release. Pay attention to check whether the oil pump, motor and ignition plug of the machine are matched before starting the machine to avoid damage. 7 Speed signal selection:display 5N-1 Pre the up or down key to set the speed signal, select 5N-2 if the two magnets of the impeller have the same polarity, and select 5N-1 when the polarity of the magnets is different or there is only one magnet (default value) If this parameter is selected incorrectly, the speed will be doubled. 8 Ignition plug power selection:display PF-5 Pre the up or down button to modify the value (1=35W , 2=40W , 3=45W , 4=80W , 5=85W , 6=90W) The default value is 5. It is recommended to use the default value, or modify it after verification. 9 Management paword modification:Initially display the oF state, pre the confirm key to skip
Fruugo United Kingdom
An exclusive, patented design: Dedicated to the development and design of pets, if you want a separate entrance and exit for your pet to facilitate daily access, the NAMSAN pet gate doors are the perfect choice. Size: outer frame: 9.8 x 12.4 inches, inner door flap: 9.6 x 8.2 inches, made of high quality material, it is wear-resistant, temperature resistant and has a long service life. COMFORTABLE FOR DAILY LIFE: Ideal for balcony doors, so owners don't have to open the door again and again for their pets. Open a separate entrance / exit for pets and this does not affect the normal use of the fly screen door after installation, which also provides protection from mosquitoes and insects. Easy to use: magnets in the bottom of the frame, close automatically; the item is lightweight, and you do not need any effort for pets to open, and it is very easy to understand how to use; the locking locks on the left and right side of the door allow full locking of the door and control the access of the pet. Suggestions: pet flap is suitable for fly screen doors, windows and other fly screen areas; installation instructions for easy installation is included; inner flaps do not include grid, you need to install the cut out grille in the frame of the cat door.
Fruugo United Kingdom
Note: Since the logistics rejects all items with batteries, we can only remove the battery from the remote control. After receiving the packaging, please purchase the remote control battery yourself, we apologize for this! The battery specification is 3V button cell of CR2032/A27 Package Included: Or 1x LCD Switch & Remote Or1x Mother Board Or1x Wire harne Or 1x Remote Or3PCS SET1x LCD Switch & Remote &1x Mother Board Or 5PCS SET1x LCD Switch & Remote &1x Mother Board1xWire harne 1x Temp sensor Specification: Color:like the pictrue show Remote distance: Within 10m Voltage: 12V/24V LCD Connectorpin: 3 PinsTriangle Plug Remote Control: 4 Button Battery: 1PC 27A12V, INCLUDED. Fitment: For 3KW 5KW 8KW Air Diesel Parking Heater Important Note: 1. There is a transparent plastic protective film on the screenthatcan be removed before using. 2.If your original motherboard and controller look the same as ours, all black plugs. then you can buy a motherboard or a controller to replace your broken one. If your original motherboard and controller are different from ours, you need to buy motherboard and controller together to replace your broken ones. Or it will not fit for your heater. 3.The remote keyonly fit for our controller and motherboard. If you need to buy a set of controller, remote key and motherboard, please choose 3PC SET. If only LCD Switch & Remote is selected, the motherboard is not included; if only Mother Board is selected, the controller and remote key are not included. Please don't make a wrong order! ! ! Please don't make a wrong order! ! ! Please don't make a wrong order! ! ! Remote Control To Codeinstruction: 1. Preing the up button to hold more than 3 seconds while in the off setting state. 2.Entering the remote control to the code interface until displayingHFR-. 3. Preing theup buttonof theremote to launch the remote code. 4. Theheateris on after the remote code disappear, or it won't turn on if the code failed. 5. The code will automatically exit when it is over time. The parameter setting proce (pre the setting key to enter the setting state) 1 Time setting:Pre the up or down key to adjust the parameters, set the hour (24-hour clock), minutes and other parameters in turn, pre the enter key to confirm the parameters, and enter the next item. 2 Timing power-on setting:default off, display 1oF pre the up key to turn on display 1oN, pre the enter key to enter, set the hour and minute in turn. Timing is a countdown mode, up to 99 hours and 59 minutes. 3 Timed shutdown setting:default off, display 2oF pre the up key to turn on display 2oN, pre the enter key to enter, set the hour and minute in turn. Timing is a countdown mode, up to 99 hours and 59 minutes. Management paword input:Pre the up and down keys to adjust. When the correct value appears, pre the confirm key to enter the next digit. After the 4-digit paword is entered correctly, pre the confirm key to enter the next item. If the input is wrong, it will return to waiting for the first digit to be entered. . There is no need to modify subsequent data, pre the SET button until exiting, or wait for 10 seconds to exit automatically. 4Pump oil volume setting:Pre the up or down key to modify the minimum pump oil volume. After reaching the required value, pre the confirm key to enter the maximum oil volume setting; pre the up or down key to modify the maximum pump oil volume. After reaching the required value , pre the enter key to enter the next item. 5 Fan speed setting:pre the up or down button to modify the minimum fan speed, after reaching the required value, pre the enter button to enter the maximum speed setting; pre the up or down button to modify the maximum fan speed, after reaching the required value, pre the enter button Go to the next item. 6 Working voltage setting:The working voltage of the motherboard can only be selected in the shutdown state. Pre the up or down key to switch and set the working voltage, adjust the 12V system to display U-12, The 24V system is adjusted to show that U-24 has completed the release. Pay attention to check whether the oil pump, motor and ignition plug of the machine are matched before starting the machine to avoid damage. 7 Speed signal selection:display 5N-1 Pre the up or down key to set the speed signal, select 5N-2 if the two magnets of the impeller have the same polarity, and select 5N-1 when the polarity of the magnets is different or there is only one magnet (default value) If this parameter is selected incorrectly, the speed will be doubled. 8 Ignition plug power selection:display PF-5 Pre the up or down button to modify the value (1=35W , 2=40W , 3=45W , 4=80W , 5=85W , 6=90W) The default value is 5. It is recommended to use the default value, or modify it after verification. 9 Management paword modification:Initially display the oF state, pre the confirm key to skip
Fruugo United Kingdom
Replaced Remote Control For Bose Solo 5 TV Sound System SoundBar 418775 1. Product Introduction This is for Bose replacement remote control, it can be used for the Bose speaker, soundbar, as well as most BD/DVD, TV, AUX and other devices. This product has two power buttons, the third one "Source Power " for the control of other equipment power switch key. The second power button "Power" for the control of bose speaker/soundbar power switch key. The "MUTE Key" & "Volume" can only be used for the bose 2 Setting Code (1) Press TV device key and key it in three seconds, the green lamp of TV device key is lighting(keep bright), input the brand code you want to set, press VOL+ button to lock the code, then press MENU to confirm the code you want to set, at this time the green light flashes twice, and finally press the EXIT button to confirm exit setting. Power Supply: 2X 1.5V AA Alkaline Alkaline Battery(Without battery) Color: black Material: plastic Package Contents: 1 x Remote Control Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Control panel with modular design, fully functional, simple structure, convenient operation. Can be widely used in petroleum, chemical, pharmaceutical, transportation, food to be industrial and commercial. Setting units of measurement: In the standby mode, or raise the amount of current display state Press CAL + RESET button for 5 seconds Enter unit conversion settings, press the RESET button Followed by LTR GAL PT QT LTR choose the unit of measurement, While the cumulative filling volume displayed in the current unit of measure conversion after Press the MENU key for 3 seconds to exit the unit conversion settings. Note: This product requires 2 AAA batteries, more convenient to use, this product comes with 2 AAA battery replaceable battery Low Battery Tips When the battery voltage is 2.2V to 2.4V, display LBat, to remind the user to replace the battery. Color: Material: plastic Specifications: Model: K24 Media: methanol fuel chemical liquid urea water Importers: 1 inch internal thread Measurement accuracy: 1% Repeatability: 0.5% Maximum working pressure: 5BAR Operating voltage: 2.3-3.3V Flow range: 10-90L / MIN Single count: 0.00-9999.9 The total cumulative number: 0.00-999999.9 Unit: L / L, gal / GAL, pint / , quart / Single measurement cleared: RESET Package Contents: 1 x K24 Turbine Digital Fuel Flow Meter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom